• Advances in nano research
• /
• 제7권1호
• /
• pp.63-75
• /
• 2019

This article represents a quasi-3D theory for the buckling investigation of magneto-electro-elastic functionally graded (MEE-FG) nanoplates. All the effects of shear deformation and thickness stretching are considered within the presented theory. Magneto-electro-elastic material properties are considered to be graded in thickness direction employing power-law distribution. Eringen's nonlocal elasticity theory is exploited to describe the size dependency of such nanoplates. Using Hamilton's principle, the nonlocal governing equations based on quasi-3D plate theory are obtained for the buckling analysis of MEE-FG nanoplates including size effect and they are solved applying analytical solution. It is found that magnetic potential, electric voltage, boundary conditions, nonlocal parameter, power-law index and plate geometrical parameters have significant effects on critical buckling loads of MEE-FG nanoscale plates.

• Advances in nano research
• /
• 제13권5호
• /
• pp.427-435
• /
• 2022

Static stability behaviors of annular sandwich plates constructed from two layers of particle-reinforced nanocomposites have been investigated in the present article. The type of nanoscale particles has been considered to be graphene oxide powders (GOPs). The particles are assumed to have uniform and graded dispersions inside the matrix and the material properties have been defined according to Halpin-Tsai micromechanical model. The core layer is assumed to have honeycomb configuration. Annular plate has been formulated according to thin shell assumptions considering geometrical nonlinearities. After solving the governing equations via Galerkin's technique, it is showed that the post-buckling curves of annular sandwich plates rely on the core wall thickness, amount of GOP particles, sector radius, and thickness of layers.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2005년도 ISMP
• /
• pp.201-212
• /
• 2005

[ $Epoxy/BaTiO_3$ ] composite embedded capacitor films (ECFs) were newly designed fur high dielectric constant and low tolerance (less than ${\pm}15\%$) embedded capacitor fabrication for organic substrates. In terms of material formulation, ECFs are composed of specially formulated epoxy resin and latent curing agent, and in terms of coating process, a comma roll coating method is used for uniform film thickness in large area. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ composite ECF is measured with MIM capacitor at 100 kHz using LCR meter. Dielectric constant of $BaTiO_3$ ECF is bigger than that of $SrTiO_3$ ECF, and it is due to difference of permittivity of $BaTiO_3\;and\;SrTiO_3$ particles. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ ECF in high frequency range $(0.5\~10GHz)$ is measured using cavity resonance method. In order to estimate dielectric constant, the reflection coefficient is measured with a network analyzer. Dielectric constant is calculated by observing the frequencies of the resonant cavity modes. About both powders, calculated dielectric constants in this frequency range are about 3/4 of the dielectric constants at 1 MHz. This difference is due to the decrease of the dielectric constant of epoxy matrix. For $BaTiO_3$ ECF, there is the dielectric relaxation at $5\~9GHz$. It is due to changing of polarization mode of $BaTiO_3$ powder. In the case of $SrTiO_3$ ECF, there is no relaxation up to 10GHz. Alternative material for embedded capacitor fabrication is $epoxy/BaTiO_3$ composite embedded capacitor paste (ECP). It uses similar materials formulation like ECF and a screen printing method for film coating. The screen printing method has the advantage of forming capacitor partially in desired part. But the screen printing makes surface irregularity during mask peel-off, Surface flatness is significantly improved by adding some additives and by applying pressure during curing. As a result, dielectric layer with improved thickness uniformity is successfully demonstrated. Using $epoxy/BaTiO_3$ composite ECP, dielectric constant of 63 and specific capacitance of 5.1nF/cm2 were achieved.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.726-732
• /
• 2007

ALD (atomic layer deposition)법을 이용하여 두께를 달리한 $10{\sim}50nm-TiO_{2-x}/quartz$ 구조의 UV 기능성 박막을 형성시켰다. 박막의 두께는 우선 $10nm-TiO_{2-x}$를 성막한 후 엘립소미터로 두께를 확인하였고 나머지 두께는 증착시간을 선형적으로 조절하여 완성하였다. $TiO_2$ 박막 두께에 따른 생성상과 파장대별 흡수도, 가시광선의 투과율을 각각 X선 회절기, UV-VIS-IR 분석기, 접사용 디지털 카메라를 써서 확인하였다. ALD 법으로 제조된 $TiO_{2-x}$는 벌크 $TiO_2$에 비해 비정질 (amorphous)이면서 비정량적인 $TiO_{2-x}$ 형태임을 확인하였다. 380 nm와 415 nm의 흡수단을 보여 $3.0{\sim}3.2eV$의 밴드갭을 가지는 기존의 벌크 $TiO_2$와는 달리, 제작된 $TiO_{2-x}$ 박막은 197 nm와 250 nm의 부근에서 흡수단을 보이는 특징이 있었다. 따라서 장파장대의 자외선을 차단하는 기능을 가진 기존의 벌크 $TiO_2$와는 달리 ALD로 제작된 나노급 $TiO_2$는 단파장대의 자외선을 흡수할 수 있는 기능성이 있었고, 아울러 가시광선대에서 우수한 투과도를 보였다. 새로이 제안된 ALD를 이용한 나노급 $TiO_{2-x}$ 박막은 가시광선의 투과도는 향상시키면서 단파장대의 자외선을 효과적으로 흡수하는 기능성을 가졌음을 확인하였다.

• Advances in nano research
• /
• 제6권1호
• /
• pp.39-55
• /
• 2018

Forced vibration analysis of a cracked functionally graded microbeam is investigated by using modified couple stress theory with damping effect. Mechanical properties of the functionally graded beam change vary along the thickness direction. The crack is modelled with a rotational spring. The Kelvin-Voigt model is considered in the damping effect. In solution of the dynamic problem, finite element method is used within Timoshenko beam theory in the time domain. Influences of the geometry and material parameters on forced vibration responses of cracked functionally graded microbeams are presented.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.81-81
• /
• 2006

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2001년도 창립10주년 제20회 학술발표회
• /
• pp.89-89
• /
• 2001

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1600-1602
• /
• 2007

TPS (Temperature Programmed Sublimation) technology is known to research for the plane evaporation of the organic film.[5] Using TPS technology, the plane source evaporation of NPB organic film has been studied for the first time. The NPB organic film consists of nano scale film phase and bulk phase on a substrate. The 400 ${\AA}$ in film phase thickness of NPB sublimates at the $175^{\circ}$ of the Ta made metal plate. It was proved that the sublimation temperature of the organic film has much lower than that of the organic powder. ($130^{\circ}$ is lower for Alq3 and $90^{\circ}$ is lower for NPB.)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.193-194
• /
• 2007

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2000년도 추계학술발표강연 및 논문개요집
• /
• pp.110-110
• /
• 2000