• Journal of the Korean Vacuum Society
• /
• v.18 no.2
• /
• pp.97-101
• /
• 2009

In the modem semiconductor industry, the progress that consumes the most capital and labor is cleansing process. Cleansing process is to remove impurities that can affect the operation of the device and deteriorate its function. Especially, Photoresist (PR) progress that etches the device always requires cleansing at the end of the progress. Also, HDI-PR (High-Dose Ion-implanted Photoresist) created from PR progress is difficult to remove. Thus, in modem IC cleansing, many steps of cleansing are used, including dry and wet cleansing. In this paper, we suggested to combine existing dry-cleansing and wet-cleansing, each represented by plasma cleansing and stripper solution, as Plasma Liquid-Vapor Activation (PLVA). This PLVA method enhances the effect of existing cleansing solution, and decreases the amount of solution and time required to strip. We stripped HDI-PR by activated solution and measured surface hardness and Young's modulus by Nano-indenter. Nano-indenter is the equipment that determines the hardness and the modulus of elasticity by indenting nano-sized tip with specific shape into the surface and measuring weight and z-axis displacement. We measured the change of surface hardness and Young's modulus before and after the cleansing. As a result, we found out that the surface hardness of the sample sharply decreased after the cleansing by plasma-activated PR stripper solution. It can be considered that if physical surface-cleansing process is inserted after this, more effective elimination of HDI-PR is possible.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.145-152
• /
• 2004

Depth-sensing indentation is wifely used for evaluation of mechanical properties of thin films. It is generally accepted that the most significant source of uncertainty in nanoindentation measurement is the geometry of the indenter tip. Therefore the successful application of the technique requires accurate calibration of the indenter tip geometry. The direct measurement of geometry of a Berkovich indenter was determined using a atomic force microscope. The indentation geometrical calibration of contact area was performed by analyzing the indenter tip profile. The equations of area functions were proposed for nanoscale thin films..

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.355.2-355.2
• /
• 2014

Zirconium nitride (ZrN)는 높은 열적, 화학적 특성과 우수한 기계적 강도, 낮은 전기 저항성 때문에 절삭공구, 의료용품 등으로 널리 사용된다. 특히 물리증착법 (PVD)으로 증착 할 경우 실제 hardness보다 높은 특성을 가지고 내마모성과 고온에서 hardness가 우수한 것으로 알려져 있다. 본 실험에서는 물리증착법 중 하나인 rf magnetron sputter를 사용하여 질소 유량에 따른 zirconium nitride 박막을 증착하였다. 그 후, $600^{\circ}C$, N2 분위기에서 후열처리를 진행하였고, 후열처리에 따른 박막의 nano-electrotribology 특성 변화를 관찰하기 위해 nano-indenter를 사용하였다. 측정결과, 질소 유량이 0, 0.5, 5 sccm으로 변함에 따라 증착된 박막의 hardness는 18.62, 15.64, 13.58 GPa로 각각 감소되었으며, elastic moduls도 210.43, 185.15, 171.52 GPa로 감소하였다. 이는 증착 과정에서 과포화된 N2 가 후열처리 과정에서 빠져 나오는 것으로 알 수 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.355.1-355.1
• /
• 2014

Zirconium nitride (ZrN)는 높은 녹는점과 기계적 강도 그리고 내식성을 가져 부품 산업계에서 hard coating에 이용된다. 또한 금속과 같은 전기 전도성을 가지므로 초고집적소자의 확산방지막에 이르기까지 많은 응용이 되고 있다. 본 실험에서는 Si 기판 위에rf magnetron sputter를 사용하여 Zr박막을 증착 하였으며 질소 유량을 변화시키며 Zirconium nitride 박막을 증착하였다. 증착된 박막의 질소 유량변화에 따른 nano-electrotribology 특성변화를 관찰하기 위해 nano-indenter를 사용하였다. 또한 Weibull statistics을 사용하여 박막의 균일성을 검증하였다. 질소 유량이 각각 0, 0.5, 5 sccm으로 증가하는 동안 surface hardness는 12.37, 10.49, 12.14 GPa로 변화하였다. 이때, 박막의 elastic modulus는 175.27, 163.94, 172.18 GPa로 각각 변화하였다. 이러한 결과는 질소 유량에 따라zirconium nitride가 여러 상으로 생성되는 것으로 해석할 수 있다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.111-115
• /
• 2003

Nanoindentation is simply an indentation test in which the length scale of the penetration is measured in nanometres rather than microns or millimetres, the latter being common in conventional hardness tests. Three-dimensional molecular dynamics simulations have been conducted to evaluate the nanoindentation test. Molecular dynamics simulations were carried out on single crystal copper by varying crystal orientations to investigate nano-behavior of material beneath an indenter in nanoindentation. Morse potential function was used as an interatomic force between indenter and thin film. The result of the simulation shows that crystal orientation significantly influenced the slip system, dislocation nucleation and dislocation behavior.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.139-146
• /
• 2004

In this study, to achieve the optimal conditions for mechanical hyper-fine pattern fabrication process, deformation behavior of the materials during indentation scratch test was studied with numerical method by ABAQUS S/W. Brittle materials (Si, Pyrex glass 7740) were used as specimens, and forming conditions to reduce the elastic recovery and pile-up were proposed. The indenter was modeled as a rigid surface. Minimum mesh sizes of specimens are 1-l0nm. Variables of the nanoindentation scratch test analysis are scratching speed, scratching load, tip radius and tip geometry. The nano-indentation scratch tests were performed by using the Berkovich pyramidal diamond indenter. Comparison between the experimental data and numerical result demonstrated that the FEM approach can be a good model of the nanoindentation scratch test. The result of the investigation will be applied to the fabrication of the hyper-fine pattern.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.177.1-177.1
• /
• 2015

플라즈마 건식 식각공정은 반도체 공정에 있어 증착 및 세정 공정과 함께 중요한 공정중 하나이다. 기존 연구에서는 높은 식각 속도, 종횡비, 대면적에 대한 균일도 증가를 위하여 플라즈마 이온 밀도의 증가와 전자 온도를 감소시키기 위한 노력을 하고 있으며 플라즈마 식각분석 연구에서는 분광학 분석 기법을 활용하여 플라즈마에 의하여 활성화된 식각 가스와 박막 표면의 반응 메커니즘 연구가 진행 중에 있다. 그러나 지금까지의 플라즈마 식각연구에서는 플라즈마 식각 공정에서 발생되는 박막의 damage에 대한 연구는 전무하다. 본 연구에서는 플라즈마 식각과정에서 발생되는 박막 표면의 damage 연구를 위하여 Nano-indenter에 의한 분석 기법을 제시하였다. Nano-indentation 기법은 박막 표면을 indenter tip으로 직접 인가하여 박막 표면의 기계적 특성을 분석하고 이를 통하여 플라즈마에 의한 박막 표면의 물성 변화를 정량적으로 측정한다. 실험에서 플라즈마 소스는 Adaptively Coupled Plasma (ACP)를 사용하였고 식각 가스로는 HBr 가스를 주로 사용하였으며, 플라즈마 소스 파워는 1000 W로 고정 하였다. 연구 결과에 의하면 식각공정 챔버 내 압력이 5, 10, 15 및 20 mTorr로 증가함에 따라 TEOS SiO2 박막의 강도가 7.76, 8.55, 8.88 및 6.29 GPa로 변화되는 것을 측정하였고 bias power에 따라서도 다르게 측정됨을 확인하였다. 이 결과를 통하여 Nano-indentation 분석 기법을 활용하여 TEOS SiO2 박막의 식각공정의 변화에 따른 강도변화를 측정함으로써 플라즈마에 의한 박막 표면의 damage를 정량적으로 측정 가능함을 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.188-192
• /
• 2013

Many studies have been conducted for preventing from diffusion between silicon wafer and metallic thin film due to a decrease of line-width and multi-layer thin film for miniaturization and high integration of semiconductor. This paper has focused on the nano-mechanical property of diffusion barrier which sample is prepared for various gas flow rate of nitrogen with tungsten (W) base from 2.5 to 10 sccm. The deposition rate, resistivity and crystallographic properties were measured by a ${\beta}$-ray back-scattering spectroscopy, 4-point probe and x-ray diffraction (XRD), respectively. We also has investigated the nano-mechanical property using the nano-indenter. As a result, the surface hardness of W-N thin film was increased rapidly from 10.07 to 15.55 GPa when the nitrogen gas flow was increased from 2.5 to 5 sccm. And the surface hardness of W-N thin film had 12.65 and 12.77 GPa at the nitrogen gas flow of 7.5 and 10 sccm respectively. These results were decreased by the comparison with the W-N thin film at nitrogen gas flow of 5 sccm. It was inferred that these severe changes were caused by the stoichiometric difference between the crystalline and amorphous state in W-N thin film. In addition, these results were caused by increased compressive stress.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1367-1372
• /
• 2007

Over the past decade, many computational researches have been performed to investigate quantitative relationships between load-displacement and material properties. But piling-up which causes errors to estimate mechanical material properties remains the most significant unresolved issue in nano-indentation test. This study has estimated quantitative aspects of the effects of material properties, especially work hardening exponent, on piling up/sinking in response of various materials. Using FE Analysis, piling up/sinking in response when material is indented by sharp indenter is investigated to evaluate the effects of material properties. From the FE analysis result, quantitative relationships between piling up/sinking in height and material properties is assessed using dimensional analysis which is used to define scaling variables and universal functions. And nano-indentaion test is performed to verify this relation on various materials. From the result of comparison with prediction from dimensional function and experiment, the work hardening exponent was found to have greater influence on the piling up/sinking in height during the nano-indentation than other material properties, such as elastic modulus and yield stress.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.456-460
• /
• 2011

Recently, the size of currently-researched components and devices reduces nano-scale. Thus, it is important and emphasizes the analyses of physical properties in nano scale. Especially, the mechanical properties are not over micro-scale components but nano-scale components with different characteristics that has been reported. However, most analytical methods for currently studying in nano-scale are related to spectroscopy and electronics, affected the limitation of viewing size that these methods give only average information. In this research, the representative nanotribology analyses, nano-indenter study the physical and mechanical properties of W-N thin film for nano region and nano depth within nano-scale that the thickness of W-N diffusion barrier has less than tens of nanometers. The Scanning probe microscopy (SPM) study the surface image. From these results, the hardness of W-N thin film underneath the nano-surface decreased from 57.67 GPa to 9.1 GPa according to the increase of nitrogen gas flow. The elastic modulus of W-N thin film underneath the nano-surface also decreased from 575.53 GPa to 178.1 GPa.