• Korean Journal of Materials Research
• /
• v.18 no.8
• /
• pp.444-449
• /
• 2008

Samples of GaMnAs, GaMnAs codoped with Be, and GaMnAs simultaneously codoped with Be and Mg were grown via low-temperature molecular beam epitaxy (LT-MBE). Be codoping is shown to take the Ga sites into the lattice efficiently and to increase the conductivity of GaMnAs. Additionally, it shifts the semiconducting behavior of GaMnAs to metallic while the Mn concentration in the GaMnAs solid solution is reduced. However, with simultaneous codoping of GaMnAs with Be and Mg, the Mn concentration increases dramatically several times over that in a GaMnAs sample alone. Mg and Be are shown to eject Mn from the Ga sites to form MnAs and MnGa precipitates.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.127-133
• /
• 2005

Manufacturing methods of Nano particles can be distinguished by top-down technology as physical method and bottom-up technology as chemical synthetic method. Top-down technology is a kind of method for making microstructure as like carving after forming a macroscopic structure in advance and its typical methods are ball milling, gas condensation method and so on. Nano Particles synthesized by bottom-up method have got to do dispersing process for using them as actual nano particles because their viscosity are very strong and so easy to shape cohesive substances. Therefore, this study is about a particle separating device which separates a certain constant size of grains processed already in mill and mixer because we mostly use media agitating mill as a device of milling and dispersing and we necessarily use very slight balls as media for manufacturing nano particles in the machine. The centrifugal device has been designed for passing and separating below a certain type of grain size after final process of particles in the mill.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.367-370
• /
• 2003

In this study, application of SAM (self-assembled monolayer) to nano replication process as an anti-adhesion layer was presented to reduce the surface energy between the nano mold and the replicated polymeric nano patterns. The electron beam lithography was used for master nano patterns and the electorforming process was used to fabricate the nickel nano stamper. Alkanethiol SAM as an anti-adhesion layer was deposited on metallic nano stamper using solution deposition method. To analyze wettability and adhesion force of SAM, contact angle and LFM (Lateral Force Microscopy) were measured at the actual processing temperature and pressure for the case of nano compression molding and at the actual UV dose for the case of nano UV molding. It was found that the surface energy due to SAM deposition on the nickel nano stamper markedly decreased and the quality of SAM on the nickel stamper maintained under the actual molding environments.

• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.41-46
• /
• 2009

The rheological properties of highly concentrated Ag nano sol depending on particle size were studied. The Ag nano sol was prepared by reducing the Ag ion in aqueous solution. The size of Ag nano particle was controlled by two steps of nucleation and growth, and the thickness of adsorption layer was varied by molecular weight of polyelectrolytes. The polyelectrolytes acted as not only ionic complex agent in ionic state and but also dispersant after formation of Ag nano sol. The effective volume was controlled by combination of varying the molecular weight of polyelectrolytes and the size Ag nano sol. The particle size and the viscosity of nano sol were characterized by particle size analyzer, HR-TEM and cone & plate viscometer. It was found that the 10 nm and 40 nm-sized Ag nano sols were prepared by controlling the nucleation and growth steps, respectively. Finally, we could prepare highly concentrated Ag nano sol over 50 wt%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.200-200
• /
• 2011

Hierarchical mesoporous ZSM-5 with enhanced mesoporosity was synthesized by microwave through the rapid assembly via ionic interaction between sulfonic acid functionalized ZSM-5 nano particles and cationic surfactant. The catalytic performance of enhanced accessibility due to mesoporosity and acidity were investigated in the alkylation of mesitylene with benzyl alcohol as alkylating agent. The effect of mole ratio of aromatic with benzyl alcohol, reaction time and alkylation agent were also studied. The enhanced mesoporosity and acidity of sulfonic acid functionalized mesoporous ZSM-5 induced activity enhancement compared with non-functionalized mesoporous ZSM-5, sulfonic functionalized mesoporous ZSM-5 synthesized by hydrothermal method and conventional microporous ZSM-5. The sulfonic acid functionalized mesoporous ZSM-5 showed much higher chemoselectivity of benzylated mesitylene than others, whereas the others mainly show dibenzyl ether as product. This significant difference in catalytic selectivity was resulted from the existence of mesopores, which definitely allowed the benzylation in mesopores.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.66-71
• /
• 2023

This paper describes a hybrid cleaning method of silicon wafer combining nano-bubble and ultrasound to remove sub-micron particles and contaminants with minimal damage to the wafer surface. In the megasonic cleaning process of semiconductor manufacturing, the cavitation induced by ultrasound can oscillate and collapse violently often with re-entrant jet formation leading to surface damage. The smaller size of cavitation bubbles leads to more stable oscillations with more thermal and viscous damping, thus to less erosive surface cleaning. In this study, ultrasonic energy was applied to the wafer surface in the DI water to excite nano-bubbles at resonance to remove contaminant particles from the surface. A patented nano-bubble generator was developed for the generation of nano-bubbles with concentration of 1×10⁹ bubbles/ml and nominal nano-bubble diameter of 150 nm. Ultrasonic nano-bubble technology improved a contaminant removal efficiency more than 97% for artificial nano-sized particles of alumina and Latex with significant reduction in cleaning time without damage to the wafer surface.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.2
• /
• pp.63-69
• /
• 2007

Ni-SiC composite coating layers were formed using two kinds of SiC nano-particles by DC electrodeposition in a nickel sulfamate bath containing SiC particles. The effect of stirring rate and SiC particle type on the microstructure and properties of Ni-SiC composite coating layers were investigated. Results revealed that the trend of deposition rate is closely related to the codeposition of SiC and the deposition rate. or nickel, and the codeposition behavior of SiC can be explained by using hydrodynamic effect due to stirring. The average roughness and friction coefficient are closely related to the codeposition of SiC and SiC particle size. It was found that the Victors microhardness of the composite coating layers increased with increasing codeposition of SiC. The composite coating layers containing smaller SiC particle showed higher hardness. This can be explained by using the strengthening mechanism resulting from dispersion hardening. Anti-wear property of the composite coating layers formed using 130 nm-sized SiC nano-particles has been improved by 2,300% compared with pure electroplated-nickel layer.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.299-305
• /
• 2011

This study deals with the preparation of polymeric electrolyte membranes having high durability for the application of fuel cells. The membranes under investigation were prepared the impregnation to porous polyethylene membranes with poly(vinyl alcohol)(PVA), poly(styrene sulfonic acid-co-maleic acid), and (PSSA-MA)3-(trihydroxysilyl)-1-propanesulfonic acid (THS-PSA). To characterize the resulting membranes, the water contents, the contact angles, FT-IR, the proton conductivity and the the modulus were measured. The proton conductivity of 30% content of THS-PSA at $55^{\circ}C$ gave excellent $1.27{\times}10^{-1}S/cm$ and the mechanical strength was improved 7 times higher up to the THS-PSA content 15%, as a result, the durability was elevated extensively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.341-342
• /
• 2008

The dynamics of nano particles in LC medium under an external electric field is of theoretical and technological interest. In this work, the dynamical characteristics of fullerene $(C_{60})$ particles in liquid crystal (LC) medium under dc electric field have been investigated. This effect was studied for homogeneously aligned nematic LC cells driven by in-plane field. The $C_{60}$ was found to be aggregated in a form of cluster inside the LC medium. Hence polystytene was used to protect the aggregation of $C_{60}$ in LC medium. When the electric field was applied, the fullerenes start to move in direction of applied electric field. The density of $C_{60}$'s particles at the electrodes increase with increase in the value of applied electric field. The dynamical motions of fullerene $(C_{60})$ particles in liquid crystal (LC) suggest that fullerene can be designed for electrophoretic displays (i.e., electronic ink).

• Journal of Korea Technology Innovation Society
• /
• v.19 no.4
• /
• pp.736-767
• /
• 2016

Recently, the social issue about harmful effects of nano-materials including nano-products to human body and environment have been raised, which were not expected in times past. To prevent the risks of nano-materials on the environment and human body, the regulatory policies are reinforced to ensure public health in world trends. In Korea, governmental department has prepared the policy for 'National nano-safety Management Master Plan' since 2011. However, it is very hard to manage all kinds of nano-materials, due to lack of nano-safety law and a wide range of nano-technology application. This study aims to analyze the current situation of the national policy related to nano-safety management and legislation, and also review the limitation of current system to propose improvement plan for nano-safety.