• 한국재료학회지
• /
• 제13권9호
• /
• pp.561-566
• /
• 2003

Mechanical alloying(MA) process using elemental powders followed by hot pressing has been applied to some intermetallic alloy system containing ferromagnetic elements, such as NiAl and $FeSi_2$. A modified thermogravimetric analysis (TGA) technique was used to investigate the degree of alloying in milled powders and hot consolidated specimens as well as heat-treated bulk specimens. It is shown that the measurement of Curie temperatures in MA intermetallic powders and consolidated specimens containing ferromagnetic components, when determined as a function of milling and heat treatment parameters, can give some insight into the progress and mechanism of alloying.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권7호
• /
• pp.1817-1839
• /
• 2024

To solve the problem of insufficient recognition of key nodes in the existing software defect detection process, this paper proposes a key node recognition algorithm based on node expansion degree and improved K-shell position, shortened as SDD_KNR. Firstly, the calculation formula of node expansion degree is designed to improve the degree that can measure the local defect propagation capability of nodes in the software network. Secondly, the concept of improved K-shell position of node is proposed to obtain the improved K-shell position of each node. Finally, the measurement of node defect propagation capability is defined, and the key node recognition algorithm is designed to identify the key function nodes with large defect impact range in the process of software defect detection. Using real software systems such as Nano, Cflow and Tar to design three sets of experiments. The corresponding directed weighted software function invoke networks are built to simulate intentional attack and defect source infection. The proposed SDD_KNR algorithm is compared with the BC algorithm, K-shell algorithm, KNMWSG algorithm and NMNC algorithm. The changing trend of network efficiency and the strength of node propagation force are analyzed to verify the effectiveness of the proposed SDD_KNR algorithm.

• 접착 및 계면
• /
• 제9권1호
• /
• pp.3-8
• /
• 2008

두 형상비가 다른 탄소나노섬유(CNF) 에폭시 복합재료의 자체 감지능과 계면특성을 전기-미세역학적 시험법을 이용하여 조사하였다. CNF/에폭시 복합재료의 부피 저항은 CNF 부피분율이 증가될수록 전기적 접촉의 증가로 인해 감소하였다. CNF/에폭시 복합재료의 분산도는 부피저항의 변동계수(COV) 값을 계산하여 간접적으로 평가하였다. 형상비가 큰 A타입에서는 B타입에 비해 좋은 자체 감지능을 확인하였으며, 형상비가 작은 B타입에서는 부피분율 2% 이상에서는 자체 감지능을 거의 보여주지 못하였다. 이것은 두 타입의 분산정도와 형상비의 차이에 의한 결과를 나타내었다. 형상비가 작은 B타입의 겉보기 강성도는 배양을 하면서 큰 표면적을 가지기 때문에 A타입보다 크게 나타났다. 열역학적 접착일은 겉보기 강성도와 상호 일치하는 결과를 보여주었다.

• 폴리머
• /
• 제29권6호
• /
• pp.599-604
• /
• 2005

생체적합성이 우수한 히아루론산과 생분해성이 우수한 폴리락타이드의 이량체인 락타이드를 결합하여 인체내에서 분해속도를 조절할 수 있는 생체적합성이 우수한 생체재료를 제조하였다. 냉동 건조법을 이용하여 히아루론산과 락타이드를 가교제 1-ethyl-3-(3-dimethyl aminopnpyl) carbodiimide(EDC)로 가교시켰다. 생성된 막을 핵자기 공명분광법으로 분석하여 젖산기 반응도와 EDC 반응도를 결정하였다. 히아루론산에 대한 락타이드의 몰비가 5부터 13까지 증가함에 따라 젖산기 반응도와 EDC 반응도는 증가하였다. 몰비가 커서 젖산기가 많이 첨가되면 팽윤도는 감소하고 취성이 강해졌다. 또 가교제 농도를 증가시키거나 가교 온도를 감소시키면 젖산기가 더욱 첨가되어 팽윤도는 감소하고 탄성률은 증가하였다. 서로 다른 가교도를 가진 막에 대해 약물 방출 실험을 한 결과 막의 가교도가 증가함에 따라 약물의 투과도는 감소하였다. 몰비가 커 젖산기가 많이 첨가된 고분자일수록 늦게 분해되었다. 몰비, 온도, 가교제 농도 등의 운전 변수를 조절하여 막의 기계적 물성과 분해 속도가 적절히 조절될 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.355-355
• /
• 2016

There has been an explosive development of nanocrystal (NC) synthesis and application due to their composition-dependent specific properties. Despite the composition, shape, and size of NCs foremost determine their physicochemical properties, the surface state and molecule conjugation also drastically change their characteristics. To make practical use of NCs, it is a prerequisite to understand the NC surface state and the degree to which they have been modified because the reaction occurs on the interface between the NCs and the surrounding medium. We report in here an analysis method to identify conjugated ligands and their binding states on semiconductor nanocrystals based on their molecular information. Surface science techniques, such as time-of-flight secondary-ion mass spectrometry (ToF-SIMS) and FT-IR spectroscopy, are adopted based on the micro-aggregated sampling method. Typical trioctylphosphine oxide-based synthesis methods of CdSe/ZnS quantum dots (QDs) have been criticized because of the peculiar effects of impurities on the synthesis processes. Since the ToF-SIMS technique provides molecular composition evidence on the existence of certain ligands, we were able to clearly identify the n-octylphosphonic acid (OPA) as a surface ligand on CdSe/ZnS QDs. Furthermore, the complementary use of the ToF-SIMS technique with the FT-IR technique could reveals the OPA ligands' binding state as bidentate complexes.

• 폴리머
• /
• 제31권6호
• /
• pp.555-561
• /
• 2007

다양한 분자량을 가진 저분자량 수용성 키토산을 얻기 위해 젖산염이 결합되어 있는 키토산 올리고당을 한외여과막 장치를 이용하여 분리하였고, 새로운 염 제거법으로 유리 아민기를 가진 LMWSC를 제조하였다. 젖산염이 제거된 LMWSC의 특성과 탈아세틸화도가 적외선 분광기(Infrared spectroscopy, IR) 및 핵자기공명장치($^1H-Nuclear$ Magnetic Resonance, $^1H-NMR$)에 의해 확인되었다. 분자량을 나타내는 다분산지수(PDI)는 $1.278{\sim}1.499$로 비교적 좁은 분자량분포를 나타내었다. 유전자 전달체로서의 가능성을 확인하기 위하여, 성공적으로 분자량에 따라 분리된 키토산 올리고당과 염이 제거된 LMWSC의 유전자 전이효율이 293T cell을 이용하여 확인하였다. 또한 유전자 전이효율을 향상시키기 위해 제조된 LMWSC 유도체가 Balb/C mice를 이용하여 평가되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권1호
• /
• pp.41-49
• /
• 2020

Jabon (Anthocephalus cadamba) is a fast-growing wood species that is widely utilized for light construction and other purposes in Indonesia. The objectives of the current study were to determine the effects of monoethylene glycol (MEG) and SiO₂ nanoparticles (nano SiO₂) impregnation treatment on the dimensional stability and density of jabon wood and to identify the characteristics of impregnated jabon wood. Wood samples were immersed in water (as untreated), MEG, 0.5% MEGSiO₂, then impregnated by applying 0.5 bar of vacuum for 60 min, and then applying 2.5 bar of pressure for 120 min. The results showed that impregnation with MEG and Nano SiO₂ had a significant effect on the dimensional stability of jabon wood. Polymers can fill cell walls in wood indicated by increasing weight percentgain, antiswelling efficiency, bulking effect, and density, then decreasing in water uptake value. Jabon wood morphology by using SEM showed that MEGSiO₂ polymers can cover part of the pitsin the wood vessel wall of jabon. This finding was reinforced by EDX results showing that the silicon content was increased due to the addition of SiO₂ nano. The XRD diffraction pattern indicated that MEGSiO₂ treatment increased the degree of crystallinity in wood samples. Overall, treatment with 0.5% MEGSiO₂ led to the most improvement in the dimensional stability of 5-year-old jabon wood in this study.

• Journal of Microbiology and Biotechnology
• /
• 제32권4호
• /
• pp.531-540
• /
• 2022

Due to the high incidence of malignant melanoma, the establishment of in vitro models that recapitulate the tumor microenvironment is of great biological and clinical importance for tumor treatment and drug research. In this study, 3D printing technology was used to prepare GelMA/PEGDA composite scaffolds that mimic the microenvironment of human malignant melanoma cell (A375) growth and construct in vitro melanoma micro-models. The GelMA/PEGDA hybrid scaffold was tested by the mechanical property, cell live/dead assay, cell proliferation assay, cytoskeleton staining and drug loading assay. The growth of tumor cells in two- and three-dimensional culture systems and the anti-cancer effect of luteolin were evaluated using the live/dead staining method and the Cell Counting Kit-8 (CCK-8) method. The results showed a high aggregation of tumor cells on the 3D scaffold, which was suitable for long-term culture. Cytoskeleton staining and immunofluorescent protein staining were used to evaluate the degree of differentiation of tumor cells under 2D and 3D culture systems. The results indicated that 3D bioprinted scaffolds were more suitable for tumor cell expansion and differentiation, and the tumor cells were more aggressive. In addition, luteolin was time- and dose-dependent on tumor cells, and tumor cells in the 3D culture system were more resistant to the drug.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.114-116
• /
• 2008

Poly(${\varepsilon}$-caprolactone) nanocapsules(nanoPCL) containing phytoncide oil were synthesized by emulsion diffusion method using ethyl acetate as organic solvent. The influence of the degree of hydrolyzation of poly(vinyl acohol) used as an emulsion stabilizer, and the different weight ratio of core material to wall material on the particle size, morphology, and emulsion stability was investigated to design nanocapsules. The encapsulated nanoPCL were characterized by FT-IR spetrometry, Scanning electron microscope, Differential scanning calorimetry, and Thermogravimetry analysis, respectively.

• 한국세라믹학회지
• /
• 제55권2호
• /
• pp.145-152
• /
• 2018

Although many bone graft materials have been developed, powder graft materials are somewhat difficult to use in surgery. To solve this problem, a bone graft material in the form of a viscous paste was prepared. Hydroxyapatite was used as a bone graft material, and methyl cellulose was used to impart viscosity. Three cases of samples were prepared, and freeze-dried block type and sintered specimens were made from the paste. The recrystallization of the graft material in a simulated body fluid and the degree of graft adhesion with a tooth were observed by scanning electron microscopy (SEM). The test for cytotoxicity was carried out and the sample was grafted into the back of a mouse to confirm the presence or absence of side effects in the animal's body. Based on these investigations, composites of this type are expected to be applicable for bone grafts.