• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.47-54
• /
• 1995

This study was to measure the properties of logs and classify them by non-destructive methods. The purpose of this experiment was focused at mensurability of logs by non-destructive methods. The non-destructive instrument, Stress-Wave Timer 239A which was made by Metriguard in U.S.A., was used. The stress wave velocities of log's cross direction were measured and compared with three different methods; 1. with hammer, 2. with hammer and D.B.H. meter, 3. with manufactured instrument. Number of used logs were seven logs, which were classified by naked eye into six groups; very severe rot, severe rot, mild rot & knot, mild rot & check, mild rot, sound log, and in diameter were into three groups; large(57.4cm), medium(36~41.2cm), small(28.9cm) log. The results, which were classified by mensurability with non-destructive methods, were followed; 1. The stress wave velocities were very different between rot and sound log. So it meant the possibility of mensurability of logs by non-destructive method even if high standard error. 2. The stress wave velocities decreased with checks more than with rots, which meant the checks affected speeds more. 3. The stress wave velocities increased with knot. 4. The velocities with manufactured instrument showed lower standard error, so more accurate results than other methods. Especially the required labour decreased from 3~4 to 2 persons. 5. Finally, the mensurability showed more accurate results and made the classification of logs scientific.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.76-83
• /
• 2015

EPS sandwich panel contains flame retardants that slow down ignition during fires,reduce the amount of heat generated, and block the spread of combustion. However, if a sandwich panel does not satisfy standards for fire-retardant performance, it may increase damage to property and human life. It is difficult to test the fire-retardant performance of a finishing material with the naked eye, so it is necessary to develop convenient and fast evaluation methods that are convenient and fast. In this study, a fire safety evaluation method for EPS sandwich panel was analyzed using X-ray to detect specific components related to the fire-retardant performance X-ray fluorescence analysis (XRF) indicated that suitable panel products contained more aluminum in comparison to unsuitable products. Gibbsite was identified as the main crystalline material of flame retardant EPS through X-ray diffraction analysis (XRD) and was included in both suitable products and unsuitable products, but there was a difference in crystalline structure. This study was verifies the possibility of evaluating fire-retardant performance using ultimate analysis and crystal analysis through these X-ray methods.

• The Journal of Korean Physical Therapy
• /
• v.20 no.1
• /
• pp.67-73
• /
• 2008

Purpose: The purpose of this study was to investigate the effect of the intensity of microcurrent stimulation (with currents of 50 ${\mu}A$, 100 ${\mu}A$ and 300 ${\mu}A$ using a pulse frequency of 5 pps) on wound healing in rats. Methods: Sixty male Korean rats were randomly divided into four groups of 15 rats that were subjected to four different treatment protocols (control group, no treatment; experimental groups, treated with currents of 50 ${\mu}A$, 100 ${\mu}A$ or 300 ${\mu}A$). An experimental 20 mm linear wound was made in each animal and all animals in the experimental groups received microcurrent stimulation once a day for 20 minutes until the day of sacrifice on day 1, day 3 and day 6. An optical microscope was used to determine any histological changes. Results: The experimental results were as follows. 1. In an examination with the naked eye, all groups showed similar changes until the first day. However, from the third day, a little intercellular fluid soaked through wound region in the control group rats. In the experimental group animals, little intercellular fluid soaked through wound region, and swelling and redness did not appear, from the third day. 2. In an examination with histological evaluation, more significant changes were observed in all of the experimental group rats than the control group animals. Especially, a stimulation intensity of 50 ${\mu}A$ caused a more significant effect than the use of the other intensities by day 6 of wound healing. In addition, rapid recovery was observed. Conclusion: It was determined that microcurrent stimulation had a positive effect on wound healing. A stimulation intensity of 50 ${\mu}A$ was more effective than the other intensities (100 ${\mu}A$ and 300 ${\mu}A$) utilized for wound healing. Furthermore, low-intensity microcurrent stimulation was more effective for the purpose of wound healing.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.4
• /
• pp.249-255
• /
• 2009

The main object of this study was to prepare of w/o emulsion including glyceryl monooleate(GMO) and to evaluate its stability by using the recently developed $Turbiscan^{(R)}LAB$. GMO is the polar oily surfactant with the low HLB value, and it forms the gel phase of cubic structures after dissolves in aqueous media. Phosphate buffer solution (PBS) of pH 7.4 was prepared as the water phase and Marcol 52(mineral oil) was used as the oil phase in this study. GMO was used as the surfactant of W/O emulsion. W/O emulsion using GMO alone as a surfactant was very unstable. But the emulsion using both GMO and poloxamer 407 was more stable. The stability of W/O emulsions was evaluated after centrifuging the emulsions. But it was difficult with naked eye because an opaque and concentrated system like W/O emulsion was very turbid. So $Turbiscan^{(R)}LAB$ was used to detect the destabilization phenomena in non-diluted emulsion. As a result, the W/O emulsion using the proper amounts of GMO and poloxamer 407 was more stable among them using GMO of various amounts. But it seems that the other element for the stability of W/O emulsion including GMO was required. Furthermore, the $Turbiscan^{(R)}LAB$ was a very efficient analyzer for evaluating the physical stability of emulsion.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.203-211
• /
• 2010

Analytic research on the surface pollutant of the three storied-pagoda at the west of Gameunsaji site as well as studies of previous wet cleaning cases was undertaken in order to decide cleaning method for removing inorganic pollutants. The status of pollutant was examined by naked eye observation, SEM-EDS, XRD. Then it was compared and categorized through qualitive and quantitative analysis. The result showed that the surface pollutants consisted of iron compounds or sulfur compounds and it was crystallized in the form of circle, oval, needle, etc. Result, Low-pressure rotating vortex process cleaning, with which particular matters are sprayed in swirl, is considered to be the best method to remove the pollutants.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.162-167
• /
• 2003

The pool $(3m{\times}6m{\times}10m)$ in Irradiated Materials Examination Facility is usually used for the purpose of taking the specimen out of cask loaded into the pool, and carrying in/out the specimen to/from the hot cell. Always, it must be cared for the water into the pool to be fine condition because all operation are worked with the naked eye during taking an irradiated materials out of the cask and plunging them in the bucket-elevator. In the aspects of the radioactive contamination control, remained substances in the water must be controlled so that the amount of substances are to be lower than the standard amount prescribed by RCA Korea Activity in a part of radioactive contamination control. This paper describes a behavior of the quality of water and the radioactive contamination of pool water for working of pool water purging system and contamination diffusion distribution bahavior of each specimens carried in/out.

• Applied Biological Chemistry
• /
• v.41 no.2
• /
• pp.160-165
• /
• 1998

Current discriminating technique of rice variety is known to be not objective till this time because of depending on naked eye of well trained inspector. DNA finger print method based on genetic character of rice has been indicated inappropriate for on-site application, because the method need much labor and skilled expert. The purpose of this study was to develops the identification technique of polished rice varieties using CCD camera images. To minimize the noise of the captured image, thresholding and median filtering were carried out, and edge was extracted from the image data. Image data after pretreatment of normalize and FFT(fast fourier transform) were used for library model and feedforward backpropagation neural network model. Image processing technique using CCD camera could discriminate the variety of rice with high accuracy in case of quite different rice of shape, but the accuracy was reached at 85% in the similar shape of rice.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.762-767
• /
• 2010

This study was conducted to investigate the influence of formulation of fungicides on epicuticular waxes in 'Campbell Early' grapes. Non-bagged and bagged berries were treated with wettable powder, suspension concentrate and emulsifiable concentrate 15 days after full bloom (DAFB) and 48 DAFB (veraison), respectively. Fruit skin was observed by naked eye and scanning electron microscope (SEM) at harvest. Remarkable white blots were observed on the berries treated 48 DAFB in the order of wettable powder, suspension concentrate, and emulsifiable concentrate. The observation by SEM showed all formulations of fungicides damaged the ultra-structure of epicuticular waxes; also, an unknown substance was observed on treatment with wettable powder and suspension concentrate. Moreover epicuticular wax appeared to be melting on the grapes treated with emulsifiable concentrate. Also, non-bagged grapes showed serious contamination of epicuticular wax by some unknown substance, but bagged grapes had only fungicides' traces.

• Fire Science and Engineering
• /
• v.14 no.3
• /
• pp.1-5
• /
• 2000

In this paper, we analyzed the fire hazard of the ballast for fluorescent lamp used as the indoor lighting. In the result of being analyzed the ballast wire by stereo microscope, many melting points were discovered, it was impossible to judge a cause with the naked eye. In the Thermal-deteriorated ballast wire, elongation structure disappeared at above $700^{\circ}$, and it only showed the enlarged appearance of the copper particle. On the metallurgical microscope of short wire, as it was confirmed the regulation of the columnar structure and the void growth at the center of boundary-face, we found that electrical short-circuit generated. Also, it was confirmed the melted part on the analysis using SEM(scanning electron microscope). Not only CuL and Cuk line that is composition factor of copper but also OK line was observed uniformly on the spectra analysis using EDX(energy dispersive x-ray spectroscopy). It means that oxygen took part in reaction at the recombination process.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.47-50
• /
• 1984

Effects of irradiation on microbiological, physicochemical aspects and quality of onion powder were investigated during three months storage. Total bacteria and coliform were sterilized by irradiation of 7 and 5 kGy, respectively and no microorganisms were grown after three months storage at $30{\pm}1^{\circ}C$. $D_{10}$ value of total bacteria was 1.64 kGy. Proximate composition of onion powder was not remarkably changed during storage except the slight decrease of pyruvic acid content. Color difference could not be distinguished by naked eye but was slightly changed by the mechanical measurement.