• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.95.2-95.2
• /
• 2011

In order to achieve high performance and low cost for commercial applications, the development of membrane electrode assemblies (MEA), in which the electrochemical reactions actually occur, must be optimized. Expensive platinum is currently used as an electrochemical catalyst due to its high activity. Although various platinum alloys and non-platinum catalysts are under development, their stabilities and catalytic activities, especially in terms of the oxygen reduction (ORR), render them currently unsuitable for practical use. Therefore, it is important to decrease platinum loading by optimizing the catalysts and electrode microstructure. In this study, we prepared several different MEAs (non-uniform Nafion$^{(R)}$ ionomer loading electrode) which have dual catalyst layers to find the optimal Nafion$^{(R)}$ ionomer distribution in the electrodes. We changed Nafion$^{(R)}$ ionomer content in the layers to find the ideal composition of the binder and Pt/C in the electrode. For MEAs with various ionomer contents in the anodes and cathodes, the electrochemical activity (activation overpotential) and the mass transport properties (concentration overpotential) were analyzed and correlated with the single cell performance. The dual catalyst layers MEA showed higher cell performance than uniformly fabricated MEA, especially at the high current density region.

• 한국자기공명학회논문지
• /
• 제13권2호
• /
• pp.135-142
• /
• 2009

$^{195}Pt$ NMR measurements were performed to deduce the variation of local density of states at the Fermi energy ($E_F$-LDOS) at the surface of carbonsupported Pt catalysts due to the addition of $Nafion^{(R)}$ ionomer in the metalelectrode-assembly for fuel cells. The results showed that the EF-LDOS at the surface of Pt particles was enhanced by the addition of $Nafion^{(R)}$ ionomers whereas it was uninfluenced in the inner (bulk) part of the Pt particles. This suggests that the effects of ionomers on the electronic states of the Pt particle surface are related to the electrochemical activity of the catalysts.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.87.1-87.1
• /
• 2011

For commercial applications, MEA development must be optimized in order to achieve high performance and low cost. There are many factors that affect the performance of MEA. Especially, the optimization of the method for preparing catalyst layer has great effect on the performance of MEA. Various methods have been used to prepare the catalyst layer of MEA. Among them, spraying method has a merit in that catalysis lay can be prepared with very flexible changes in catalyst layer as well as in the solvent composition of catalyst ink. In addition, in order to reduce the time required for manufacturing catalyst layer, an effort has been made to change the nozzle size and injection pressure of spray system. Further, the operation condition of spray system was changed in various ways in an effort to prepare optimum catalyst layer of MEA. Having optimized the operation condition of spraying system, comprehensive and diverse experiments were carried out concerning various factors that affect the performance of MEA. The present research report describes the results of more sub-categorized and more detailed experiments about the important factors (Nafion$^{(R)}$ ionomer, Relative humidity) which have been shown in previous experiments to exert greater effect on the performance of MEA.

• 멤브레인
• /
• 제30권1호
• /
• pp.57-65
• /
• 2020

본 연구에서는 고분자 전해질막을 구성하고 있는 고분자 주쇄의 반복단위 개수를 변경해 가며 수화채널 모폴로지와 이온전도도의 변화를 비교하였고, 최종적으로 분자동역학 전산모사 수행 시에 적정한 고분자 모델을 선정하기 위한 기준을 제시하고자 하였다. 고분자 주쇄의 길이가 가장 짧은 모델에서 주쇄 및 술폰산기의 움직임이 커지는 것을 관찰할 수 있었지만, 수화채널 모폴로지는 특별한 상관관계를 발견할 수 없었다. 또한, 수화채널 모폴로지에 가장 큰 영향을 받는 수소이온 전달 능력의 특성 상, 수소이온 전도도에서도 고분자 주쇄의 길이와 큰 상관관계를 보이지는 않았다. 이러한 결과는 특히 바인더용 이오노머 제조에 대한 중요한 정보를 제공한다. 일반적으로 바인더용 이오노머의 경우 고분자 전해질막 소재를 저분자량으로 합성하여 사용하게 되는데, 이때 주쇄/술폰산기의 움직임이 향상되므로 촉매층을 잘 둘러싸는 역할을 할 수 있는 반면에, 수소이온 전달 능력 자체에 있어서는 특별한 변화가 없을 것을 예상할 수 있다. 결론적으로, 바인더용 이오노머 제조시에는 수소이온 전달 성능보다는 물성에 좀 더 초점을 맞추어 분자량 및 구조 설계가 필요할 것이다.