• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.326-326
• /
• 2011

반도체 소자의 집적화/소형화에 따라, 낮은 비저항을 가진 구리(Cu)를 이용한 배선공정에 관한 연구가 활발하게 진행되고 있다. 구리배선 공정에 있어 전기 도금법이 다양하게 적용됨에 따라, 구리도금 박막 형성을 위해 사용되는 Cu seed 층의 상태는 배선으로 형성된 Cu박막 특성에 크게 영향을 미친다 [1-3]. 본 연구에서는 sputter 방식으로 증착된 Cu seed 층(Cu seed / Ti / Si) 위에 형성된 자연산화막을 제거하기 위하여 다양한 세정방법을 도입하여 비교 분석하였다. 계면활성제인 TS-40A를 비롯한 NH4OH 용액과 H2SO4 용액을 사용하여 Cu seed 층 위에 형성된 구리산화막을 제거함으로서 형성된 표면형상 및 표면상태를 조사분석 하였다. FE-SEM (Field Emission Scanning Electron Microscope)을 이용하여 표면 처리된 Cu seed층 표면의 형상 및 roughness 등을 측정하였고, XPS (X-ray Photoelectron Spectroscopy)를 이용하여 표면 처리된 Cu seed 표면의 화학구조 및 불순물 상태를 조사하였다.

• Textile Coloration and Finishing
• /
• v.18 no.2 s.87
• /
• pp.31-38
• /
• 2006

Silk fabrics are very popular and widely used because of their elegant appearance. However, silk fabrics generally have easy wrinkle, and do not stretch and deform permanently after machine washing. Then the stretched properties of silk fabrics are important for the application of industrial textile materials such as formal and sports wear. Thus, this research surveys the covering, weaving and degumming conditions for stretched silk fabrics. As a result, yarn breaking stress was reduced with increasing spindle speed, and the yarn twists were optimized under the covering condition of polyurethane/silk with PVA pretreatment. In addition, the shrinkage of the silk fabrics treated with star degumming process was reduced by continuous NaOH degumming process. The fabrics showed the fabric physical properties with optimum stretched properties and evenness surfaces.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.371-379
• /
• 2016

In this article, the foamed body of glass was manufactured from the waste borosilicate glass produced by wet pulverization process without additional pretreatment which can be used as a recycling method for waste LCD panel glass. Each 100 g of pulverized waste borosilicate glass with the size of less than 270 mesh were mixed with 0.3 weight fraction of carbon and 1.5 weight fraction of $Na_2CO_3$, $Na_2SO_4$ and $CaCO_3$ and let them foamed for 20 minutes at $950^{\circ}C$ to manufacture the foamed body having the density of less than $0.3g/cm^3$. Additionally, adding $SiO_2$ or $H_3BO_3$ to the mixture enabled the foamed body to have efficient formation of open pores which showed the possibility for producing the foamed body with new functionalities such as sound absorption.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.9-13
• /
• 2000

Wood demand is increasing more and more, but world has been confronted with decreasing forest resources. Korea has to depend upon foreign wood and wood-based products for more than 95 percent of total domestic demand per year. In order to heighten self-sufficiency for wood supply and demand, we have to develop wood substitutes. Rice hull is the cheapest agricultural by-product we can get in Korea, more over the production of rice hull amounts to 1 million tons per year. This study was carried out to utilize rice hull and to decide the optimum condition of rice hull pretreatment for manufacture of rice hull board. Steam explosion method gave the best result, and the next boiling treatment of 1 hour, the last 1 hour treatment with 1% NaOH solution. Optimum conditions of explosion method were 20kgf/$cm^2-1$ minute and 25kgf/$cm^2-1$ minute. Rice hull board made with exploded rice hull met the KS standard(KS F 3104, 1997) and showed the same strength as a control, PB. And also the 1 hour boiling treatment was more effective than the 1 hour treatment with 1% NaOH solution.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.108-117
• /
• 2017

Laver, Porphyra, is distinctive for its high content of proteins and polysaccharides such as porphyran and hemicellulose. The chemical properties of the polysaccharides extracted with different extraction methods such as hot water, dilute acid(pH 4.0) or alkali solution(2N NaOH) were examined to investigate the suitable extraction conditions for porphyran and hemicellulose from laver. For porphyran extraction, dilute acid solution was more preferable to hot water and alkali solution because of its higher 3,6-anhydrogalactose content and lower protein content. However, alkali solution was more suitable to extract the hemicellulose because of higher mannose content indicating the extraction of mannan. To decrease contamination of the polysaccharides with protein, the dried lavers were pretreated with enzymes (Protamex, Flavourzyme, Alcalase, Viscozyme) before hot water extraction. All enzyme pretreatments increased the yield of polysaccharides by compared with control (enzyme unpretreated) and Flavourzyme pretreatment was most effective to decrease protein contamination in the polysaccharide. All viscosities of porphyran solutions pretreated by enzymes were lower compared to the control porphyran solution and showed pseudoplastic behavior with yield stress. In case of alkali extraction of residues obtained after enzyme hydrolysis and hot water extraction, protease pretreatment increased the mannose contents in the polysaccharide while the xylose content was increased by Viscozyme pretreatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.52-58
• /
• 2013

The effets of the pretreatments of tropical kapok fibers were evaluated in this study in terms of water sorption capacity and oil sorption capacity. The alkali treatments with NaOH resulted in the reduction of lignin, oil and hemicellulose, which were detected with FT-IR spectrum. The reduction of the lyphophilic components such as fat on kapok fiber by the ozone treatments were also measured with FT-IR spectrum. The oil sorption capacity of kapok fiber was decreased by the alkali treatments and the ozone treatments, while the water sorption capacity was increased. The liquid sorption capacity were greatly affected by the mechanical cutting of kapok fiber which exposed the big lumen of kapok fiber. The hydrophilic property of kapok fiber could be controlled by the pretreatments, which would increase the applicability of kapok fiber for preparation of various functional paper products.

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.681-692
• /
• 2013

We aimed to evaluate the effectiveness of the Giggenbach bottle method and develop the related pretreatment and analytical methods using artificial fumarolic gases. The artificial fumarolic gases were generated by mixing $CO_2$, CO, $H_2S$, $SO_2$, $H_2$, and $CH_4$ gas streams with a $N_2$ stream sparged through an acidic medium containing HCl and HF, with their compositions varied by adjusting the gas flow rates. The resultant fumarolic gases were collected into an evacuated bottle partially filled with a NaOH absorption solution. While non-condensible gases such as CO, $H_2S$, and $CH_4$ accumulated in the headspace of the bottle, acidic components including $CO_2$, $SO_2$, HCl, and HF that were dissolved into the alkaline solution. Like other acidic components, $H_2S$ also dissolved into the solution, but it reacted with dissolved $Cd^{2+}$ to precipitate as CdS when $Cd(CH_3COO)_2$ was added. The non-condensible gases were analyzed on a gas chromatography. Then, CdS precipitates were separated from the alkaline solution by filtration, and they were pretreated with $H_2O_2$ to oxidize CdS-bound sulfide into sulfate. In addition, a portion of the solution was also pretreated with $H_2O_2$ to oxidize sulfite to sulfate. Following the pretreatment, the resultant samples were analyzed for $SO_4^{2-}$, $Cl^-$ and $F^-$ on an ion chromatography. In the meanwhile, dissolved $CO_2$ was analyzed on a total organic carbon-inorganic carbon analyzer without such pretreatment. According to our experimental results, the measured concentrations of the fumarolic gases were shown to be proportional to the gas flow rates, indicating that the Giggenbach bottle method is adequate for monitoring volcanic gas. The pretreatment and analytical methods employed in this study may also enhance the accuracy and reproducibility of the Giggenbach bottle method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.987-996
• /
• 2005

For cationization, if chitosan, which has the affinity for a human body and reacts easily without inducing any pollution, is used, cationization of Tencel blended fabrics can be expected and further expansion of its use as a new susceptible material can be expected. Therefore, in this study, in order to compare a Tencel/cotton and a Tencel/Cotton/PET as Tencel blended fabrics with a Tencel single fabric, the fabric samples were used and processed with chitosan after NaOH pretreatment and enzyme treatment thereof, and then its adherent efficiency was enhanced by using a crosslinking agent, and then it was got to be finished with a softener. The fibril of Tencel fabric was controlled by enzyme treatment so that the surface of the Tencel blended fabrics got to be smooth. Chitosan adhered to the surface of the Tencel blended fabrics in the form of particles through its processing with chitosan. Chitosan treatment caused little change in the crystal structure thereof and the thermal stability of the Tencel/Cotton/PET fabric was slightly improved. The total hand value(THV) calculated on the basis of the change due to chitosan treatment was increased in all samples.

• Journal of Hydrogen and New Energy
• /
• v.2 no.1
• /
• pp.57-67
• /
• 1990

This study is proposed to investigate the effect of electrode preparation method for Alkaline Fuel Cell using NaOH as an electrolyte on the Fuel Cell performance. The materials used for the preparation of electrode are Pt and Ag on Vulcan XC-72. Surface area of Vulcan XC-72 have different values according to the pretreatment conditions and the dispersion of Pt is dependent on the impregnation Particle size of Pt impregnated on unpretreated carbon was observed to be $20{\sim}40{\AA}$ and that on pretreated carbon in $N_2$ stream at $950^{\circ}C$ was found to be finely dispersed less then $15{\AA}$. The electrode performance was affected by the particle size of metals and operating temperature. It was revealed from this study that the optimum particle size about $30{\AA}$ and optimum temperature range is between $90{\sim}100^{\circ}C$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1572-1582
• /
• 2006

In this study, in order to compare a Tencel/cotton and a Tencel/Cotton/PET as Tencel blended fabrics with a Tencel fabric, the fabric samples were treated with chitosan after NaOH pretreatment and enzyme treatment thereof, And then its adherent efficiency was enhanced by using a crosslinking agent. After that, it was treated with a softener. In chitosan treatment, the functions of moisture regain, tensile strength, air permeability and crease resistance were more improved in the Tencel blended fabrics than in the Tencel fabric. Thus, it may be thought that the physical properties of the Tencel blended fabrics were more effectively modified than those of the Tencel fabric. And the friction charged voltage was very much reduced in all samples, so that chitosan treatment was effective for prevention of electrostatic charge. Further, chitosan finishing treatment improved remarkably the antibacterial activity in all samples regardless of the type of strains.