• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.603-612
• /
• 2000

Corrosion characteristics on the 12Cr alloy steel of turbine blade was electro-chemically investigated in 3.5wt% NaCI and 12.7wt% Na2S04 solution, respectively. Electro-chemical polarization test, Huey test and Oxalic acid etching test were previously conducted to estimate corrosion susceptibility of the material. And, using the horizontal corrosion fatigue tester, corrosion fatigue characteristics of 12Cr alloy steel in distilled water, 3.5wt% NaCI solution, and 12.7wt%(1M) Na2S04 solution were also fracture-mechanically estimated and compared their results. Parameter considered was room temperature, 60'C and 90'C. Corrosion fatigue crack length was measured by DC potential difference method.Obtained results are as follows,1) 12Cr alloy steel showed high corrosion rate in 3.5wt% NaCI solution and Na2S04 solution at high tempratue.2) Intergranular corrosion sensitivity of 12 Cr alloy was smaller than austenitic stainless steel.3) Corrosion fatigue crack growth rate in 3.5wt% NaCI and 12.7wt%(IM) Na2S04 solution is entirely higher than in the distilled water, and also increased with the temperature increase.

• Preventive Nutrition and Food Science
• /
• 제2권1호
• /
• pp.1-5
• /
• 1997

Solution Properties of polyelectrolytic biopolymers such as chitosen, pectin, alginate and etc. are significantly influenced by molecular weight and salt concentrations. The effect of NaCI concentration on the hydrodynamic properties of chitosan in dilute region was investigated for chitosans of varying molecular weight. Intrinsic vicosity([η]) of citosans with 5 different molecular weight was determined by glass capillary viscometer, and the viscosity average molecular weight was calculated using Mark-Houwink equation. Intrinsic viscosity decreased with increasing NaCI concentration for all chitosan samples, and it was proportional to the logarithmic NaCI concentration, i.e.,[η]∝log{TEX}$(C_{NaCl})^{$\alpha$}${/TEX}. Decreasing trend of[η] with NaCI concentration became more pronounced with increasing molecular weight. It was also found that the a values, indicating {TEX}$C_{NaCl}${/TEX} dependence of[η], were linearly correlated with the logarithmic molecular weight({TEX}$R^{2}${/TEX}=0.980). The chain stiffness parameters(B) were calculated by B=S./{TEX}$([η]_{0.1})^{1.32}${/TEX}, in which S was obtained from slope of [η] va {TEX}$I^{-1/2}${/TEX}. The B values of chitosan samples were determined to be 0.113~0071 with a average of 0.09.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2008년도 춘계 총회 및 학술발표회
• /
• pp.238-241
• /
• 2008

• 한국환경과학회지
• /
• 제18권6호
• /
• pp.667-674
• /
• 2009

This study has carried out to evaluate the effect of NaCI as electrolyte of single (electrolysis and UV process) and complex (electrolysis/UV) processes for the purpose of removal and mineralization of Rhodamine B (RhB) dye in water. It also evaluated the synergetic effect on the combination of electrolysis and UV process. The experimental results showed that RhB removal of UV process was decreased with increase of NaCl, while RhB removal of electrolysis and electrolysis/UV process was increased with increase of NaCI. The decolorization rate of the RhB solution in every process was more rapid than the mineralization rate identified by COD removal. The latter took longer time for further oxidation. Absorption spectra of an aqueous solution containing RhB showed a continued diminution of the RhB concentration in the bulk solution: concomitantly, no new absorption peaks appeared. This confirmed the decolorization of RhB, i.e., the breakup of the chromophores. It was observed that RhB removal in electrolysis/UV process is similar to the sum of the UV and electrolysis. However, it was found that the COD of RhB could be degraded more efficiently by the electrolysis/UV process than the sum of the two individual process. A synergetic effect was demonstrated in electrolysis/UV process.

• Corrosion Science and Technology
• /
• 제4권1호
• /
• pp.19-22
• /
• 2005

Two Au-Ag-Cu-Pd dental casting alloys (Au:12% and 20%) used. The test solutions used 0.9 % NaCl solution (isotonic sodium chloride solution), 0.9 % NaCl solution containing 1 % lactic acid, and 0.9 % NaCl solution containing 1 % lactic acid and 0.1 mol $dm^{-3}$ $Na_2S$. The surface of two samples in three sample solutions was not natural discoloration during one year. The alloy containing 12 % gold was easily alloyed and the composition was uniform comparing with the alloy containing 20 % gold. The rest potentials have not a little effect after three months. The kinds of metals could not definitely from the oxidation and reduction waves of metal on the cyclic voltammograms. The dissolutions of gold and palladium were 12 % Au sample in the 0.9 % NaCl solution containing 1 % lactic acid and 0.1 mol $dm^{-3}$ $Na_{2}S$. The pH of solution had an affect on dissolution of copper, and sulfur ion had an affect on dissolution of silver. The copper dissolved amount from 20 % gold sample was about 26 times comparing with that of 12 % gold sample in the 0.9 % solution containing 1 % lactic acid. Corrosion products were silver chloride and copper chloride in NaCl solution, and silver sulfide and copper sulfide in NaCl solution containing $Na_{2}S$.

• Preventive Nutrition and Food Science
• /
• 제2권1호
• /
• pp.49-54
• /
• 1997

The modifying effects of Chelidonium majus L/(Papaeracea)herb extract(CH) ,and analgesic traditionally prescribed for gastric and duodenal ulcer patients, on gastric tumor development given Ν-methyl-Ν'-nitro-Ν-nitrosogyanidine(MNNG) were studied in sixty-four 6 week-old male Wistar rats. Group 1 rats were ini-tially given MNNG(200mg/kg b/w.) by gavage ar days 0 and 14 as well as saturated sodium chloride solution(S-NaCI, 1ml per rat) every 3 days during weeks 0 to 3(6 times) and then placed on basal diet containing 0.1 or 0.2% CH ofr 16 weeks from week 4. Rats of Groups 2 and 3 were treated with MNNG together with S-NaCI or saline(0.9% NaCI, 21ml per rat) respectively, timed as in Group 1 but without further treatment. All survival animals were killed at week 20 and histopathologically investigate. in the glandular stomach, the number of preneoplastic pepsinogen 1 altered pyloric glands(PAPGs) in the MNNG+S-NaCI→CH(0.1%) group(Group 1) was significantly smaller than in the MNNG+S-NaCI group(Group 2)(p<0.02). The inci-dences of forestomach neoplastic lesions (Papillomas and squamous cell carcinomas)also showed a tendency for decrease with the CH treatment. The results thus indicate that C"H exerts inhibitory effects on glandular for decrease with the CH treatment. The results thus indicate that CH exerts inhibitory effects on glandular stomach carcinogenesis in the rat, so that it may have potential as a chemopreventive agent for stomach cancer in man.

• 아시안잔디학회지
• /
• 제2권1호
• /
• pp.5-30
• /
• 1988

The object of this experiments was to know the salt tolerance of Fults and other lawn grasses. Fults, Olympic (Tall fescue, Festuca arundinacea Schred), Ceeping red fescue, Kentucky bluegrass and Zoysia grass (Z. japonica S.) were grown in hydroponics with vermiculite at various concentrations of NaCl. Hoagland's solution was used as the basic solution (control), and the concentrations of Cl to it were 1000, 2000, 3000, 4000 and l5OOOppm, respectively. Each was cultivated under the circumstances during 2 months. The results obtained are summarized as follows: 1.The growth of Fults, Olympic, Creeping red fescue and others were better at Cl lOOOppm than control. In the 5OOOppm application, Fescues become worse and 23.9% of them were withered. In concentration of Cl above 9OOOppm, it was impossible to live. 2.In the l0000~l1000ppm application, Olympic and Kentucky bluegrass were become worse and most of them died. 3.Fults were almost possible to live in the below of 9OOOppm, but they began to die in the above of 10000 ppm. 4.With the increasing concentration of Cl, plants were dwarfed and the number of stems, leaves and roots were reduced, but it was especially observed that the number of stolons of Creeping red fescue were increased at 1000~4000ppm. 5.Fults grass was the most salt tolerant turfgrass, but was impossible to live at salt level of about 36 millimhos (Exchange NaCI conductivity-ppm). Among the grasses, according to salt tolerance, they were arranged as follows. Fults > Zoysia japonica S. > Ky belugrass > Olympic grass > Creeping red fescue 6.The number of leaves, stems, tillers, and dry weight of Olympic grass, Fults and others were increased more at Cl 1OOOppm application than control, but in the above 4OOOppm application, those of plants were decreased. 7.The productivity of all grasses under the experiments was increased at 3.l75millimhos (Exchange NaCi conductivity ppm) in the concentration of Cl. The each dry-weight of Olympic, Creeping red fescue, Kentucky bluegrass and Zoysia grass was decreased at 8.85millimhos, and the weight of Fults grass was also decreased remarkably at 12.20millimhos. 8.As the result of this experiments, most plants grow normally at low concentration of NaCI-l000ppm. That seems to stimulate more the grasses to grow than non-salt.

• The Korean Journal of Physiology
• /
• 제23권1호
• /
• pp.13-21
• /
• 1989

The present study was designed to investigate i) the action of various nucleotides on membrane permeability of rat red blood cell and hepatocyte for $Na^{+}$ and $Rb^{+}$ ii) the characteristics of purinoceptors on these cell membranes. Blood from Sprague-Dawley rats was obtained by carotid arterial cannulation. Red blood cells were then washed 3 times with saline at $4{\circ}C$. Hepatic parenchymal cells were isolated from rat livers by using a modification of the Berry and Friend (1969) method. For the $Na^{+}$ influx studies, isolated RBC and hepatocyte were incubated in incubation medium containing $^{22}Na^{+}0.2\;{\mu}Ci/ml$ at $37^{\circ}C$. After various time intervals samples were removed from the incubation flask and washed out 3 times with ice-cold washing solutions. Cells were destroyed by adding Triton X-100 and TCA solution. After centrifugation, the supernatants were assayed for $^{22}Na^{+}$ by gamma counter. $^{86}Rb^{+}$ was used to simulate $K^{+}$ in these $K^{+}efflux$ studies. Isolated hepatocytes were incubated for 60 min in the loading solution containing $^{86}Rb^{+}\;10\;{\mu}Ci/ml$ at $37^{\circ}C$. After loading, the cells washed out 3 times by centrifugation with washing solution. The cells were incubated in buffer solution at $37^{\circ}C$. At intervals thereafter, samples were removed and centrifuged. The supernatants were analyzed for $^{86}Rb^{+}$ by liquid scintillation counter. The main results of the experiments were: 1) ATP and ATPP increased in both $^{22}Na^{+}$ influx and $^{86}Rb^{+}$ efflux in the red blood cell. Although ADP showed a tendency to increase in RBC membrane permeability for $^{22}Na^{+}$ and $^{86}Rb^{+}$, the changes were not significantly different from the control. 2) The Significant changes in $^{22}Na^{+}$ and $^{86}Rb^{+}$ flux by ATP were also demonstrated in hepatocyte. ATPP and ADP showed a tendency to increase in hepatocyte membrane permeability for both ions. 3) Other nucleoside triphosphates-ITP, GTP and CTP-did not change in membrane permeability for $^{22}Na^{+}$ and $^{86}Rb^{+}$ in RBC and hepatocyte. In conclusion, not only ATP but also ATPP activate purinoceptors and change in membrane permeability for $Na^{+}$ and $K^{+}$. In order to activate purinoceptors on the cell membrane, the nucleotides have to possess intact adenine moiety and three phosphates or more in its molecule.

• Corrosion Science and Technology
• /
• 제4권2호
• /
• pp.45-50
• /
• 2005

A 3% NaCl solution of 1 $dm^3$ circulated with 1.5 $dm^3/min$ by a pump for 24 h in the presence of magnetic field. An iron plate immersed in a $100cm^3$ of test solution for 24 h. The rest potential and pH on surface fixed after 3 h. Containing 0~120 ppm of Fe(II) ion, the dissolution in the magnetically treated solution rose comparing with that in the non-magnetically treated solution. The dissolution amount reached to maximum at 50 ppm, then fixed in the non-magnetically treated solution. When Fe(II) ion existed in the magnetically treated solution, dissolution accelerated a little. In the non-magnetic treated solution containing 10~125 ppm of Fe(III) ion existed, the dissolution accelerated. The dissolution amounts reached to maximum at 50 ppm, then decreased from maximum value. In the magnetically treated solution, the dissolution amounts reached to minimum until 50 ppm, then increased from minimum value. The dissolution amounts affected larger with increasing of magnetic flux density. Fe(II), Fe(III) ions and magnetic treatment affected to formation of $Fe(OH)_2$ and/or $Fe_3O_4$ films. The magnetically treated effects memorized about one month.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.1.1-1.1
• /
• 2011

Printed electronics based on the direct writing of solution processable functional materials have been of paramount interest and importance. In this talk, the synthesis of printable inorganic functional materials (conductors and semiconductors) for thin-film transistors (TFTs) and photovoltaic devices, device fabrication based on a printing technique, and specific characteristics of devices are presented. For printable conductor materials, Ag ink is designed to achieve the long-term dispersion stability and good adhesion property on a glass substrate, and Cu ink is sophisticatedly formulated to endow the oxidation stability in air and even aqueous solvent system. The both inks were successfully printed onto either polymer or glass substrate, exhibiting the superior conductivity comparable to that of bulk one. In addition, the organic thin-film transistor based on the printed metal source/drain electrode exhibits the electrical performance comparable to that of a transistor based on a vacuum deposited Au electrode. For printable amorphous oxide semiconductors (AOSs), I introduce the noble ways to resolve the critical problems, a high processing temperature above $400^{\circ}C$ and low mobility of AOSs annealed at a low temperature below $400^{\circ}C$. The dependency of TFT performances on the chemical structure of AOSs is compared and contrasted to clarify which factor should be considered to realize the low temperature annealed, high performance AOSs. For photovoltaic application, CI(G)S nanoparticle ink for solution processable high performance solar cells is presented. By overcoming the critical drawbacks of conventional solution processed CI(G)S absorber layers, the device quality dense CI(G)S layer is obtained, affording 7.3% efficiency CI(G)S photovoltaic device.