• Journal of the Korean Ceramic Society
• /
• v.24 no.1
• /
• pp.9-16
• /
• 1987

Physical and electrical properties of ${\beta}$-Al2O3 were investigated as function of Na2O content from 6.67 wt.% to 13.19 wt.%. The majority phase is ${\beta}$-Al2O3 and the small amount of ${\beta}$"-Al2O3 exists in the specimens sintered at 1600$^{\circ}$for 30 mins. In the case of specimens with 8.54 wt.% Na2O sintered at 1600$^{\circ}C$, the relative amount of ${\beta}$-Al2O3 phase increases and that of ${\beta}$"-Al2O3 phase decreases with increasing sintering time, and then ${\beta}$"-Al2O3 phase does not exist if sintering time is over 8 hrs. As the Na2O content is increased, the 3-Point MOR and the resistivity are decreased. However, density and 3-Point MOR with increasing sintering time are decreased due to increasing the enclosed pore trapped inside of the exaggerated grains. As the sintering time is increased, the average grain size and the duplexity of microstructure are increased, and the resistivity is slightly decreased.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.269-278
• /
• 2010

We investigated characteristics of the coloring material of Dancheong pigments and hope that this study contributes the revival of traditional Dancheong pigments color. For this purpose, we collected Dancheong fragment samples that fell off naturally from old wooden buildings in Gwangju and Jeonnam and analyzed the natural coloring material by XRD and EDS-SEM analysis method. In white pigments of Dancheong fragments, it is confirmed that gypsum$(CaSO_{4}{\cdot}2H_{2}O)$, quartz$(SiO_{2})$, white lead$(PbCO_{3})$ and calcite$(CaCO_{3})$ which have been used for white pigments since ancient times and $TiO_{2}$ which is common used in modern times. In red pigments of Dancheong fragments, it is confirmed that hematite$(Fe_{2}O_{3})$ and red lead$(Pb_{3}O_{4})$, which have been used for red pigments since ancient times and C.I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$ but there is no cinnabar(HgS) which has been used since B.C. 3000 in China. In yellow pigments of Dancheong fragments, it is confirmed that crocoite$(PbCrO_{4})$ and massicot(PbO). In blue pigments of Dancheong fragments, it is confirmed that sodalite$(Na_{4}BeAlSi_{4}O_{12}Cl)$ and nosean $(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$ as coloring material of blue pigment and C.I. pigments blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ which is used in modern times. In green pigments of Dancheong fragments, it is confirmed that calumetite$(Cu(OHCI)_{2}{\cdot}2H_{2}O)$, escolaite(Cr2O3), dichromium trioxide$(Cr_{2}O_{3})$, emerald green$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$, and C.I. pigments green$(C_{32}H_{16}-XCl_{x}Cu_{8})$ which is used in modern time. In black pigments of Dancheong fragments, Chiness ink(carbon black) is confirmed.

• The korean journal of orthodontics
• /
• v.40 no.6
• /
• pp.432-443
• /
• 2010

Objective: The purpose of this prospective study was to evaluate the dentofacial effects of conventional and modified facemask therapies with rapid maxillary expansion, in a group of Class III patients; and compared with an untreated control group. Methods: The conventional facemask group (Group 1) comprised of 24 patients, 13 girls and 11 boys (mean age, $9.2{\pm}1.4$ years); the modified facemask treatment group (Group 2) comprised of 24 patients, 12 girls and 12 boys (mean age, $9.3{\pm}1.6$ years); and the control group (Group 3) comprised of 21 subjects, 11 girls and 10 boys (mean age, $9.8{\pm}1.9$ years). Treatment and control changes within the groups and the differences between the groups were analyzed statistically. Intra-group comparisons were evaluated using the non-parametric Wilcoxon's test and intergroup changes were analyzed using the Kruskal-Wallis test. The statistical significance of intergroup differences was further assessed with the Mann-Whitney test for independent samples and applying Bonferroni's correction (p < 0.016). Results: In group 1, SNB changes were less than the control. There were increases in SNA, ANB, SN-MP, A to N perp and Upper lip to E plane. In group 2, SNB, U1-NA (mm) U1-NA (${\circ}$) and Pog to N perp (mm) changes were less than the control. There were increases in SNA, ANB, SN-MP, A to N perp and Upper lip to E plane. Conclusions: Modified facemask appliance can be used effectively in Class III patients with a retrognathic maxilla. Facemask therapies with expansion resulted in an anterior advancement and translation of maxilla without rotation; and the mandible moved downward and backward ward in both treatment groups.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.47-54
• /
• 1990

In this study, the effects of gas ratio($N_2:H_2$) and treatment time on the fatigue fracture behavior, fatigue crack growth behavior and corrosion fatigue fracture behavior for the ion-nitrided SM45C steel were investigated. The results show that the fatigue limit and corrosion fatigue strength increased in porportion to $N_2$ gas and treatment time for all kinds of specimen, used in the experiment. Compare to the non-nitrided specimen, the fatigue limit and the corrosion fatigue strength increased about $24{\sim}29%$ at $10^7$ cycles in air and $32{\sim}48%$ at $10^6$ cycles in 3% NaCl aqueous solution, respectively. Similar results were derived with SM45C steel under Compression-Tension $24{\sim}29%$ at $10^6$ cycles in air and $32{\sim}48%$ either in 3% NaCl aqueous solution or in tap water, respectively. Ion-nitrided SM45C steel showed a slow fatigue crack growth rate at relatively low range of ${\Delta}K$ compared to the non-nitrided specimen. To the contrary, its rate increase at higher range of ${\Delta}K$.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.131-137
• /
• 1996

This analysis has been conducted to get some basic data of the composition of culture solution mostly in inorganic ions, and water quality in hydroponic farms in Chollabuk - do. pH range was shown from 6.00 to 7.65 and the average was 6.58. EC range was shown from 0.01 to 0.94 mS/cm and the average was 0.28 mS/cm. Na concentration ranged from 4.71 to 145.44 ppm and Cl concentration ranged from 0 to 171.80 ppm were shown and their average were 24.24 ppm and 26.33 ppm, respectively. Na and Cl concentrations were higher as 7.7%, compared to those of other farms, which could cause the salt accumulation in the substrate mats. K, Ca and Mg concentrations were ranged from 0.93 to 17.38 ppm, 2.29 to 34.30 ppm and 0.70 to 18.61 ppm, respectively. Average concentrations were 3.06 ppm in K, 13.00 ppm in Ca and 4.91 ppm in Mg. 50, and PO$_4$ concentration ranged from 0.63 to 59.79 ppm and 0 to 4.28 ppm were shown and their average were 18.11 and 0.51 ppm. Cu concentration was ranged from 0 to 0.32 ppm and 0 to 6.22 ppm in Zn concentration. Their average were 0.02 ppm and 0.52ppm, respectively.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.600-606
• /
• 2018

The influence of acidity in MTT zeolite of different Si/Al molar ratio's on the catalyst activity in methanol-to-olefin (MTO) reaction has been investigated. The Si/Al ratio was controlled with the Al content in the gel when N,N,N',N'-tetramethyl-1,3-diaminopropane was used as a structure directing agent (SDA). The gel composition was controlled to $20SiO_2$ : 30SDA : x (=0.25~1.25)$NaAlO_2$ : 2NaOH : $624H_2O$, which was subject to the hydrothermal synthesis at 433 K for 4 days. As the composition of sodium aluminate decreased, the particle size of MTT zeolite increased, and also the amount of acid sites decreased. To investigate the catalytic performance, MTO reaction was carried out at 673 K with $1.2h^{-1}$ WHSV. It was found that the H-MTT (1.00Al) catalyst with a Si/Al molar ratio of 24 maintained the methanol conversion over 90% for 900 min.

• Current Photovoltaic Research
• /
• v.7 no.4
• /
• pp.103-110
• /
• 2019

Cu(In,Ga)₃Se₅ (β-CIGS) has a band gap of 1.35 eV, which is an optimum value for high solar-energy conversion efficiency. The effects of Cu and Ga content on the cell performance were investigated previously. However, the effect of Se content on the cell performance is not well understood yet. In this work, β-CIGS films were fabricated by three-stage co-evaporation of elemental sources with various Se fluxes at the third stage instead of at all stages. The average composition of five samples was Cu_1.05(In_0.59,Ga_0.41)3Se_y, where the stoichiometric y value is 5.03 and the stoichiometric Se/metal (Se/M) ratio is 1.24. We varied the Se/metal ratio in a range from 1.18 to 1.28. We found that the best efficiency was achieved when the Se/M ratio was 1.24, which is exactly the stoichiometric value where the CIGS grains on the CIGS surface were tightly connected and faceted. With the optimum Se/M ratio, we were able to enhance the cell efficiency of a β-CIGS solar cell from 9.6% to 12.0% by employing a Na₂S post deposition treatment. Our results indicate that Na₂S post deposition treatment is very effective to enhance the cell efficiency to a level on par with that in α-CIGS cell.

• The Journal of Engineering Geology
• /
• v.26 no.4
• /
• pp.561-570
• /
• 2016

For the investigation of hydrochemical changes in hot spring waters from the Onyang hot spring area, we analyzed water chemistry of 24 hot spring waters in 2011 and 2016. The results showed that there is no significant change in temperature and properties of the hot spring waters. The relationship of 2016 between temperature and $SiO_2$ and F reveals a positive trend ($r^2=0.60$, 0.47), and the relationship between temperature and Ca, Mg, Cl, $SO_4$, $HCO_3$, EC reveals a negative trend ($r^2=0.50$, 0.11, 0.50, 0.63, 0.23, 0.51). The relationship between temperature and pH is a positive trend, while the one between temperature and DO is a negative trend, indicating that the source is from deep groundwater. When plotted on Piper diagram, most of which are $Na-HCO_3$ but several hot waters are classified as the $Na(Ca)-HCO_3$, indicating inflow of shallow groundwater was occurred.

• Advances in materials Research
• /
• v.4 no.3
• /
• pp.133-144
• /
• 2015

The aim of this investigation is to prepare geopolymer resin by alkali activation of ceramic waste (AACW) with different sodium hydroxide (NaOH) and liquid sodium silicate (LSS) concentrations. In order to prepare geopolymer cement, AACW was replaced by 10 and 30 % by weight (wt.,) of concrete waste (CoW) as well as 10 and 30 wt., % ground granulated blast-furnace slag (GGBFS). The results showed that, the compressive strength of AACW increases with the increase of activator content up to 15:15 wt., % NaOH: LSS. All AACW hardened specimens activated by 3:3 (MC6), 6:6 (MC12), 12:12 (MC24) and 15:15 wt., % (MC30) NaOH: LSS destroyed when cured in water for 24h. The MC18 mix showed higher resistivity to water curing. The results also showed that, the replacement of AACW containing 9:9 wt., % NaOH: LSS (MC18) by 10 (MCCo10) and 30 (MCCo30) wt., % CoWdecreased the compressive strength at all ages of curing. In contrast, the MCCo10 mix showed the lower chemically combined water content compared to MC18 mix. The MCCo30 mix showed the higher chemically combined water content compared to MC18 and MCCo10 mixes. The compressive strength and chemically combined water of all AACWmixes containing GGBFS (MCS10 and MCS30) were higher than those of AACWwith no GGBFS (MC18). As the amount of GGBFS content increases the chemically combined water increases. The x-ray diffraction (XRD) proved that as the amount of CoWcontent increases, the degree of crystallinity increases. Conversely, the replacement of AACW by GGBFS leads to increase the amorphiticity character. The infrared spectroscopy (FTIR) confirms the higher reactivity of GGBFS compared to CoW as a result of successive hydration products formation, enhancing the compaction of microstructure as observed in scanning electron microscopy (SEM).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.126-132
• /
• 2002

The nanocrystalline zirconia powder with anisotropic shapes was synthesized by hydrothermal treatment of the tetragonal zirconia prepared by aging the zirconium hydroxide precipitate, which was obtained from the reaction between $ZrOCl_2{\cdot}8H_2O$ and KOH solutions under the fixed pH of 13.5, at $100^{\circ}C$ for 24 h. With increasing the hydrothermal reaction temperature and time, the fraction of tetragonal phase with spherical zirconia decreased, whereas, relatively the fraction of monoclinic phase with spindle-like and rod shape zirconia increased. As increased concentration of the NaOH solution it promoted the particle size to become larger and the crystalline phase to transform tetragonal to monoclinic. However, the specific surface area at the early stage of the reaction increased and subsequently decreased because of grain growth in powder with longer reaction time.