• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.66-73
• /
• 2021

The development of excellent high-energy materials has progressed in the direction of synthesizing compounds with high nitrogen content, ultimately oriented toward the form of polynitrogen. As cyclo-N₅^-, a type of polynitrogen, is synthesized as sodium pentazolate(NaN₅) and the results of various metal and non-metal compounds have been studied, the usage of polynitrogen compounds is attracting attention. However, since the known synthesis and purification method of NaN₅ are very extreme and complicated, it is essential to improve the process in order to increase the utility of the pentazolate compounds in the future. In this study, only a simple filtration method was applied to purify the NaN₅, and based on this, two non-metal pentazolate salt compounds were successfully synthesized.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.6
• /
• pp.739-743
• /
• 2003

New quaternary compounds $ANb_2PS_{10}$ (A = Na, Ag) and $AuNb_4P_2S_{20}$ were synthesized and characterized. The structures of three compounds consist of one-dimensional infinite chains built by [$Nb_2S_{12}$] and [$PS_4$] units. Cation atoms are occupied within the van der Waals gap of sulfur atoms between infinite chains to make -S…$M^+$…S- contacts. There is only one Au atom site and so crystallographically a unit cell contains four equivalent Au atoms in $AuNb_4P_2S_{20}$. This is only the half of the numbers of Na or Ag atoms in $NaNb_2PS_{10}$ or $AgNb_2PS_{10}$. The ratio between $Nb_2PS_{10}$ matrix vs the cation is, therefore, 1 : 1 for Ag and Na, but it is 2 : 1 for Au. Mixed valency in Au or Nb was expected to balance the charge in the latter compound. The electronic structures calculated based on the extended Huckel tight-binding method show that $ANb_2PS_{10}$ (A = Ag, Na) are semiconducting, while $AuNb_4P_2S_{20}$ is metallic, which is not consistent with the experimental results of these three compounds that all exhibit semiconducting property. The result of calculation suggests that $AuNb_4P_2S_{20}$ might be a magnetic insulator. Magnetic measurement experiment exactly proved that the compound is a Slater antiferromagnetic material with the Neels' temperature of 45 K. It is recognized, therefore, that electronic structure analysis is very useful to understand the properties of compounds.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.57-64
• /
• 2018

Water leaching of tungsten(W) and vanadium(V) was researched from their oxides through mechanochemical (MC) reaction with alkali compounds. Intensive grinding for the mixture of tungsten/vanadium oxide and alkali compounds (NaOH, $Na2CO_3$) was carried out with change of their mixing ratios and grinding duration. Water soluble compounds, $Na_2WO_4$ and $NaVO_3$, were synthesized through MC reaction and their solubilities increased in proportion to the mixing ratio of sodium compound and grinding times. Whereas vanadium leachability was less affected by the mixting ratio and grinding times. The leachabilities of 99.0% were accomplished by a short period of MC treatment, W (30 min.) and V (5 min.). This process enable us to extract W and V from their oxides via a water leaching, and can be applied to the selective recovery of W and V from $DeNO_x$ spent catalysts.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2961-2966
• /
• 2010

Reduction of carbonyl compounds such as aldehydes, ketones, $\alpha,\beta$-unsaturated enals and enones, $\alpha$-diketones and acyloins was carried out readily with $NaBH_3CN$ in the presence of wet $SiO_2$ as a neutral media. The reactions were performed at solvent-free conditions in oil bath (70 - $80^{\circ}C$) or under microwave irradiation (240 W) to give the product alcohols in high to excellent yields. Regioselective 1,2-reduction of conjugated carbonyl compounds took place in a perfect selectivity without any side product formation.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4316-4320
• /
• 2011

The effects of various hydroxide compounds on base stacking (BS) were investigated for pre-concentration of DNA molecules in capillary electrophoresis (CE). In BS, hydroxide ions ($OH^-$) were electrokinetically introduced after DNA sample injection. A neutralization reaction occurred between the $OH^-$ and $Tris^+$ of the running buffer, which resulted in a zone of lower conductivity. Within the low conductivity zone of the high electric field, the DNA molecules moved more rapidly and were concentrated in front of the low conductivity zone. At the same BS conditions of CE, the enhanced sensitivity of the DNA samples was dependent on the kind of multivalent cations in the hydroxide compounds. Except for LiOH, the hydroxide compounds with monovalent cations showed more effective BS than those with divalent cations because of solubility, ionic strength and electronegativity. The order of hydroxide compounds that enhance the detection sensitivity of DNA molecules was as follows: NaOH > $NH_4OH$ > KOH > $Ba(OH)_2$ > $Sr(OH)_2$ > LiOH > $Ca(OH)_2$ > $Mg(OH)_2$. $NH_4OH$, KOH and $Ba(OH)_2$ proved to be efficient hydroxide compounds to use as effective BS reagents in CE instead of NaOH.

• Journal of Life Science
• /
• v.9 no.5
• /
• pp.575-580
• /
• 1999

Even if odorous compounds remained very low concentration in water, it caused strong odor. Because Geosmin and most of odorous compound had very vaporization, those were difficult to analyze with GC/MSD and Purge & Trap. So, we needed pre-treatment method for decreasing amounts of extracting solvents, improving recovery efficiencies and increasing analytical efficiencies. This study developed efficient technology for analyzing odorous compounds, using various adsorbents and extracting solvents. The optimum adsorbent was XAD resins. Especially, XAD-2, XAD-7 and XAD-2010 were superior, but XAD-2 of these and MTBE was the optimum extraction solvent. Other extraction solvent's efficiency was in order of MTBE>Dichloromethane>n-Hexane>Diethylether. The optimum NaCl dosage for increasing efficiency was 5g in liquid-liquid extraction method. The shaking time(0∼24hr) had no concern with adsorption efficiency. The optimum adsorbent was XAD-2 resin and extraction solvent was MTBE. Dosing NaCl, adsorption efficiency was increased in liquid-liquid extraction method, but NaCl has no effect on liquid-solid extraction method. In this experimental results, this method will apply to not only Geosmin but other well-known odorous compounds (2-MIB, IBMP, IPMP, TCA) and algae toxins (Mycrocystin, Anatoxin etc)

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.839-845
• /
• 1995

The structural and dielectric properties of Pb(Mg1/3Nb2/3)O3 ceramics substituted by Nd3+, La3+, K+ and Na+ were studied over 0~50 at.% substituent content. The 1 : 1 ordering behavior of Mg2+ and Nb5+ ions in the B site sublattice was observed in Nd3+-and La3+-modified compounds. The degree of ordering was increased with Nd3+, La3+ content in the compounds. But K+-or Na+-modified compounds did not exhibit the ordering behavior. This was explained by charge and size effect of A and B site cations and oxygen vacancies. As the mole fractions of substituent increased, the maximum values of dielectric constants were rapidly decreased and the phase transitions were broadened. Phase transition temperature was correlated with the covalency of A-O and B-O bonding.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.273-279
• /
• 2005

The degradation of o-chlorophenol(o-CP) in the presence of NaOH and the byproducts formed were investigated in a supercritical water(SCW) destruction process. The conversion of o-CP in the absence of NaOH was less than 20%, however it showed 100% conversion in the presence of NaOH(mole ratio[NaOH]/[o-CP] over than 2) with a residence time of less than 1 second. The formation of PAHs and the phenolic compounds formed were decreased in the presence of NaOH. The results revealed that the formation of byproducts during the destruction of o-CP in SCW was effected by the addition of NaOH. Phenol, cresols, chlorinated phenols, PAHs, p,p'-dihydroxybiphenyl and oxygenated polyaromatic compounds such as 1-indanone, dibenzofuran and dibenzo-p-dioxin were detected in both conditions(presence and absence of NaOH). At the same time, in the presence of NaOH, 2-ethylphenol, o-hydroxyacetophenone, hydroquinone, 4-allylphenol, 3-phenoxyphenol and 4,4'-oxybisphenol were also detected. The observed results suggest that the destruction of o-CP in SCW with NaOH occurs through a number of complicated reaction pathways. Dibenzofuran and dibenzo-p-dioxin were also detected during destruction of o-CP by SCW. The above observation suggests that there may be a common relationship between the thermal incineration process and SCW decomposition process.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.425-428
• /
• 1992

Sodium substituted samples of $Y_{1-x}Na_xBa_2Cu_3O_{7-y}$ for $0.00{\leq}x{\leq}0.16$ were prepared and characterized by X-ray powder pattern, electrical resistivity and magnetic susceptibility measurements, Raman spectroscopy, and idometric titration. The Na substituted compounds have narrow solid solution limits where $0.00{\leq}x{\leq}0.16.$ As the Na concentration increases, the parent orthorhombic structure tends to gradually change to tetragonal. Small changes in the superconducting transition temperature, Tc, are observed in this solid solution region. Raman spectra for the Na phases are virtually identical with that of $YBa_2Cu_3O_7$ except that the Cu(1)-O(4) stretching mode at 504 $cm^{-1}$ and the Cu(2)-O(2,3) bending mode at 340 $cm^{-1}$ for x = 0.16 are slightly shifted. The hole concentrations of the sodium substituted compounds ranged from 0.31 to 0.33 per Cu site are increased with Na content. The substitution of $Na^+$ for $Y^{3+}$ site appears to create oxygen vacancies in the Cu-O chains, causes structural change from orthorhombic to tetragonal, and increases hole concentration in the substituted system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.1
• /
• pp.11-23
• /
• 1998

The purpose of this study was to survey chemical distribution of inorganic elements and ions in the submicron particles, to characterize qualitatively emitting sources by factor analysis, and finally to reveal existing patterns in terms of chemical compounds by a stepwise multiple regression analysis. Total of 141 samples were collected by a cascade impactor from 1989 to1996. Fifteen chemical species (Al, Ba, Cd, K, Pb, Cu, Fe, Ni, $Cl^-, NO_3^-, SO_4^{2-}, K^+, Mg^{2+}, Ca^{2+}, and Na^+$) were characterized by AAS and IC. The study showed that average seasonal levels of submicron particulate matters $(d_p<0.43 \mum)$ were 18.7 $\mug/m^3$ in spring, 15.5 $\mug/m^3$ in summer, 15.7 $\mug/m^3$ in fall, and 24.5 $\mug/m^3$ in winter, respectively. All of the anion concentrations in the particle were highest in the winter season. By applying a factor analysis, 5 source patterns were qualitatively obtained, such as sulfate related source, nitrate related source, oil burning source, calcium related source, and coal combustion source. Finally, when applying a stepwise multiple regression analysis, the results clearly showed that $Na^+ and Ca^{2+}, K^+ and Ca^{2+}, NO_3^-$ and relative humidity, $Cl^-$ and ambient temperature, $Ca^{2+} and Cl^-, Mg^{2+} and SO_4^{2-}, Na^+ and NO_3^-, and Ca^{2+} and NO_3^-$, respectively, are negatively contributed to each other. As a result of those statistical analysis, we could suggest that some chemical compounds in the submicron particles such as$NaNO_3, MgSO_4, Ca(NO_3)_2, and CaCl_2$ may not exist on the filter as final composing products; however, other compounds may possibly exist in the form of $Mg(NO_3)_2, CaSO_4, Na_2SO_4, K_2SO_4, MgCl_2, NaCl, and KCl$. Thus, it must be necessary to identify differences between the results of above statistical analysis and of the real world by laboratory experiments.