• YAKHAK HOEJI
• /
• v.33 no.4
• /
• pp.246-252
• /
• 1989

2-Amino-1-N-methyl benzamide, 2-N-benzyl amino benzamide, 2-N-phenyl amino benzamide of 2-amino benzamide derivatives were reacted with ${\alpha}-bromo$ acetaldehyde diethyl acetal in basic condition. 2-N-alkylated products were prepared from 2-amino-1-N-methyl benzamide and 2-N-phenyl amino benzamide. 1-N-benzyl-1.4-benzodiazepin-5-one was prerpared from 2-N-benzyl aminobenzamide via intramolecular cyclization. However, 2-amino-1-N-methyl benzamide with sodium amide did not react to 1.4-benzodiazepin-5-one derivative but 3-methyl-quinazoline-2.4-dione was obtained.

• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.482-491
• /
• 2006

The anaerobic ammonium oxidation (ANAMMOX) from substrates with various $NO_2-N$ and $NH_4-N$ concentationes, which were generated from piggery waste was accomplished by using anaerobic granular sludge as seeding sludge. As the result of operation, when $NO_2-N/NH_4-N$ ratios of ANAMMOX influent were 0.6~1.5, $NO_2-N/NH_4-N$ removal ratios were exhibited 1.19~2.07 (average 1.63). The higher influent $NO_2-N/NH_4-N$ ratios resulted in higher $NO_2-N/NH_4-N$ removal ratios by ANAMMOX. It means that $NO_2-N$ concentration is very important factor in ANAMMOX. Specific ammonium removal rate was constantly as $0.03{\sim}0.04gNH_4-N/g$ VSS-day at $35^{\circ}C$ while it was $0.01gNH_4-N/g$ VSS-day at $20{\sim}30^{\circ}C$. Thus, in order to reduce the effluent N concentration, either an increase of ANAMMOX reactor HRT or more biomass accumulation at the optimal temperature can be considered.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.5
• /
• pp.214-219
• /
• 2007

This paper proposes a new IFFT(Inverse Fast Fourier Transform) algorithm, which is proper for IMDCT(Inverse Modified Discrete Cosine Transform) of MPEG-2 AAC(Advanced Audio Coding) decoder. The $2^n$(N-point) type IMDCT is the most powerful among many IMDCT algorithms, however it includes IFFT that requires many calculation cycles. The IFFT used in $2^n$(N-point) type IMDCT employ the bit-reverse data arrangement of inputs and N/4-point complex IFFT to reduce the calculation cycles. We devised a new data arrangement method of IFFT input and $N/4^{n+1}$-type IFFT and thus we can reduce multiplication cycles, addition cycles, and ROM size.

• Journal of the Korean Ceramic Society
• /
• v.33 no.12
• /
• pp.1421-1425
• /
• 1996

Sintered Si3N4 and Inconel composed of Ni(58-63%) Cr(21-25%) Al(1-17%) Mn(<1%) fe(balance) were pressurelessly joined by using Ag-Cu-Ti brazing filler metal at 950℃ and 1200℃ under N2 gas atmosphere of 1atm and their interfacial structures were investigated. In case that the reaction temperature was low as 950℃ its interfacial structure was "Inconel metal/Ti-rich phase layer/brazing filler metal layer/Si3N4 " Ti used as reactive metal existed in between inconel steel and brazing metal and moved to the interface of between brazing filler metal nd Si3N4 according as reaction temperature increased up to 1200℃. The interfacial structure of inconel steel-Si3N4 reacted at 1200℃ was ' inconel metal/Ni-rich phase layer containing of Fe. Cr and Si/Cu-rich phase layer containing of Mn and Si/Si3N4 " Cr Mn, Ni and Fe diffused to the interface of between brazing filler metal and Si3N4 and reacted with Si3N4 The most reactive components of ingredients of inconel metal were Cr and Mn. On the other hand Ti added as reactive components to Ag-Cu eutectic segregated into Ni-rich phase layer,.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.413-418
• /
• 1985

Tobacco plant(8-leaf seedlings) were grown on water culture fertilized with different N sources ($NO_3-N$, $NH_4-N$, $NO_3+NH_4-N$) during 15 days. Daily uptake of nutrients and inorganic constituents in plants were investigated in relation to growth responses of them. 1. Nitrate-fed plant showed higher daily uptake of inorganic cations than those in other treatments, and reached about two times higher uptake of nitrogen and three times more uptake of cations (K, Ca, Mg). Potassium was preferentially uptaken at a very fast rate from the beginning after treatment. Also $NO_3-N$ tended to be taken up selectively by the plant from the mixture of nitrate and $NH_4-N$. 2. The initial pH (pH 6.0) of culture medium drastically changed into acid (pH 4.0) in the $NH_4-N$ medium, but into slightly higher (pH 6.4) in the nitrate when measured after exposure of 24 hours. The mixture also tended to show an acidity but much weaker than $NH_4-N$ solution. 3. Nitrate-fed plant had a normal growth pattern but $NH_4-N$ fed plant almost stopped growing. Those plants containing both nitrate and ammonium N were also showed very poor growth.

• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.432-443
• /
• 1999

The self-toughened Si3N4 ceramics where needle-like coarse ${\beta}$-Si3N4 grains were dispersed within fine-grain-ed matrix were prepared via hot-prssing at 1730$^{\circ}C$ for 2 h using 5 vol% ${\beta}$-Si3N4 whiskers as a seed. In this study the microstructures and mechanical properties of self-toughened Si3N4 ceramics were investigated. The flexural strength of self-toughened Si3N4 ceramics was increased from 600-800 MPa of the Si3N4 monolith to 830-1025 MPa. The KIC was also increased from 4.0-5.0MPa$.$m1/2 of the Si3N4 monolith to 5.8-6.5MPa$.$m1/2$.$The needle-like coarse Si3N4 grains in self-toughened ceramics were considered to induce various toughening mechanisms including the crack deflection pull-out and bridging and to contribute to KIC improvement. In ad-dition to toughening mechanisms the KIC improvement was considered to be partially indebted also to the orien-tation of large ${\beta}$-Si3N4 grains and to the promoting effect of ${\beta}$-Si3N4 whiskers on the ${\alpha}$ to ${\beta}$ transtion.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.517-521
• /
• 2008

Struvite의 최적 생성조건은 NH$_4$-N의 초기농도에 관계없이 모두 NH$_4^+$, PO$_4^{3-}$ 및 Mg$^{2+}$가 등몰비이고 pH 10.5이었다. Struvite 침전반응에서 NH$_4$-N 및 PO$_4$-P 제거율에 미치는 struvite seeding 효과는 습윤상태의 struvite를 seeding할 경우 그 효과가 거의 없었으나 건조된 struvite를 seeding할 경우 NH$_4$-N의 제거율은 증가되지만 PO$_4$-P의 제거율은 감소되는 경향을 나타냈다. 이는 건조과정에서 struvite의 NH$_4$-N가 휘산되어 소실되었기 때문이다. Mg와 P원으로서 struvite의 재이용을 위한 적정 건조온도는 100$^{\circ}C$ 이하였으며 그 이상 온도에서는 struvite가 $NH_4MgPO_4\cdot6H_2O$형에서 MgPO$_4$형으로 상전이점에 따라 struvite seeding에 의한 NE$_4$-N의 제거율이 현저히 감소되었다. 건조된 struvite는 초기 NH$_4$-N의 몰농도 대비 50%를 seeding할 경우 60% 이상의 NH$_4$-N를 제거하였으며, seeding량을 150%로 증가시킬 경우 90% 이상의 NH$_4$-N 제거율을 얻을 수 있었다. 그러나 struvite를 반복 재사용할 경우 재사용 횟수에 비례하여 NH$_4$-N의 제거율은 감소하는 경향을 보여 재사용 횟수가 제한적임을 알 수 있었다.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.1
• /
• pp.27-31
• /
• 1991

This study was conducted to examine the adsorption capacity of $NH_4\;^+-N$ by natural zeolite for the purpose of investigating the possibility for $NH_4\;^+-N$ eliminator of Korean natural zeolite. The dominant clay minerals of zeolite were clinoptilolite and mordenite. The reaction of $NH_4\;^+-N$ adsorption by zeolite reached equilibrium after 4hrs. The amount of $NH_4\;^+-N$ adsoption by zeolite was not significantly affected by the particle size of zeolite. The order of $NH_4\;^+-N$ adsorption by zeolite according to exchangeable cations was Na-> Ca> K-saturated zeolite. The amount of $NH_4\;^+-N$ adsorption by zeolite was increased with increasing pH of solution and the ratio of zeolite to the volume of solution. The isothermal curvel of $NH_4\;^+-N$ adsorption by zeolite was conformed to Langmuir equation.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.4
• /
• pp.171-175
• /
• 1983

This paper reports new phosphonamide derivatives which contain diethyl aminomethylphosphonate, diethyl DL-1-aminobenzylphosphonate and 6-aminopenicillanic acid; N-(ethyl phthalimidomethylphosphonyl)-L-methionine methyl ester, N-(ethyl phthalimidomethylphosphonyl)-L-valine ethyl ester, N-[ethyl N-(methoxycarbonylmethyl)benzylphosphonamido]-2-phthalimidoacetamide, N-[ethyl N-(diethyl phosphonylbenzyl)methylphthalamido] phthalimide, N-[ethyl {ethyl N-(diethyl phosphonylbenzyl)aminomethylphosphonamido} phosphonylmethyl] phthalimide, N-[ethyl N-(diethyl phosphonylbenzyl)methylphosphonamido]-2-phthalimidoacetamide, N, N'-bis (ethyl phthalimidomethylphosphonyl)ethylene diamine, 6-(ethyl DL-1-aminobenzylphosphonamido) penicillanic acid, ethyl N-(ethoxycarbonylmethyl)-1-aminobenzylphosphonamide, ethyl N-(diethyl phosphonylbenzyl)aminomethylphosphonamide and N,N'-bis (ethyl aminomethylphosphonyl) ethylene diamine.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.111-116
• /
• 1998

Silicon nitride is hard and tough ceramic material. Hereby, mechanical machinability is very poor. It has also high electrical resistance. Silicon nitride of extremely high electrical resistivity becomes conductive ceramic composite by adding 30 wt% TiN. Ceramics with high electrical conductivity can be electrical discharge machined. Using by the Electrical Discharge Machining (EDM) technique. $Si_3N_4-TiN$ ceramic composite with high electrical conductivity is utilized to make metal working tool. These tool materials have severe wear problem as well as oxidation. Post HIP processing after sintering $Si_3N_4-TiN$ ceramic composites was performed. The tribological property of $Si_3N_4-TiN$ composite as a function of content of TiN was investigated in air, at room temperature. The hardness, fracture toughness, and flexural strength were compared with the wear volume. SEM observation of wear tracks can make an explanation of wear mode of $Si_3N_4-TiN$ composite.