• 제목/요약/키워드: NOx removal by SCR

검색결과 44건 처리시간 0.017초

반응조건에 대한 Mn-Cu-TiO2촉매와 V/TiO2촉매의 탈질 특성 (NOx removal of Mn-Cu-TiO2 and V/TiO2 catalysts for the reaction conditions)

  • 장현태;차왕석
    • 한국산학기술학회논문지
    • /
    • 제17권7호
    • /
    • pp.713-719
    • /
    • 2016
  • 암모니아를 환원제로 사용하는 선택적 촉매 환원법에서 Mn-Cu-$TiO_2$ 촉매와 $V_2O_5$/$TiO_2$ 촉매를 사용하여 반응 조건에 따른 질소 산화물 전환 특성을 연구하였다. 반응 온도와 공간 속도를 변경시키면서 촉매의 질소 산화물 전환 효율 변화를 측정하였다. Mn-Cu-$TiO_2$ 촉매의 질소 산화물 제거 활성은 반응 온도와 공간 속도가 증가할수록 감소하였으나, $V_2O_5$/$TiO_2$ 촉매의 경우 반응 온도 증가에 따라 촉매의 질소 산화물 제거 활성 또한 증가하였다. Mn-Cu-$TiO_2$ 촉매의 경우 $200^{\circ}C$ 이하의 온도에서 저온 활성이 우수하였으며, 이를 $H_2$-TPR 및 XPS 분석 실험을 통해 확인할 수 있었다. 초기 반응 온도의 변경 실험을 통해 Mn-Cu-$TiO_2$ 촉매의 경우 고온에서 열적 쇼크를 일부 받으나, $V_2O_5$/$TiO_2$ 촉매의 경우는 거의 영향을 받지 않음을 확인할 수 있었다. 공간 속도에 따른 질소 산화물 전환 효율 변화는 C 촉매의 경우 전 구간에 걸쳐 공간 속도가 증가할수록 질소 산화물 전환 효율도 감소하는 경향을 보였다. 그러나 D 촉매의 경우 공간 속도가 증가할수록 질소 산화물 전환 효율은 감소하였으나, 감소 정도가 C 촉매 보다는 훨씬 적었다.

The Effect of Promoters Addition on NOx Removal by $NH_3$ over V$V_2O_5/TiO_2$

  • Lee, Keon-Joo
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제18권E1호
    • /
    • pp.29-36
    • /
    • 2002
  • The selective catalytic reduction (SCR) reaction of promoter catalysts was investigated in this study. A pure anatase type of TiO$_2$ was used as support. Activation measurement of prepared catalysts was practiced on a fixed reactor packing by the glass bead after filling up catalysts in 1/4 inch stainless tube. The reaction temperature was measured by K-type thermocouple and catalyst was heated by electric furnace. The standard compositions of the simulated flue gas mixture in this study were as follows: NO 1,780ppm, NH$_3$1,780ppm, $O_2$1% and $N_2$ as balance gas. In this study, gas analyzer was used to measure the outgassing gas. Catalyst bed was handled for 1hr at 45$0^{\circ}C$, and the reactivity of the various catalyst was determined in a wide temperature range. Conversion of NH$_3$/NO ratio and of $O_2$ concentration was practiced at 1,1.5 and 2, respectively. The respective space velocity were as follows . 10,000, 15,000 and 17,000 hr-1. It was found that the maximum conversion temperature range was in a 5$0^{\circ}C$. It was also found toi be very sensitive at space velocity, $O_2$ concentration, and NH$_3$/NO ratio. We also noticed that the maximum conversion temperature of (W, Mo, Sn) -V$_2$O$_{5}$/TiO$_2$ catalysts was broad. Specially WO$_3$-V$_2$O$_{5}$TiO$_2$2 catalyst appeared nearly 100% conversion at not only above 30$0^{\circ}C$ ut also below 25$0^{\circ}C$. At over 30$0^{\circ}C$, NH$_3$ oxidation decreased with decrease of surface excess oxygen. In addition, WO$_3$-V$_2$O$_{5}$TiO$_2$ catalyst did not appear to affect space velocity, $O_2$ concentration, and NH$_3$/NO ratio.ratio.

질소산화물의 선택적 환원 제거시 염화수소기체가 촉매에 미치는 영향 (The Effect of HCl Gas on Selective Catalytic Reduction of Nitrogen Oxide)

  • 정진우;최광호;성희제;채호정;남인식
    • 대한환경공학회지
    • /
    • 제22권4호
    • /
    • pp.609-617
    • /
    • 2000
  • 본 연구에서는 소각로용 SCR(Selective Catalytic Reduction) 촉매개발의 일환으로, 소각로 배기가스 중에 다량 함유되어 있는 염화수소 (HCl) 기체가 촉매활성에 미치는 영향에 관하여 고찰하였다. 연구에 사용된 촉매는 상용 $V_2O_5-WO_3/TiO_2$ 촉매와 구리이온이 교환된 모더나이트형 제올라이트, CuHM 촉매로 실험은 수분의 유무에 따라 건조가스 조건과 습윤가스 조건으로 나누어 수행하였다. 건조가스 조건에서는 염화수소농도가 증가함에 따라 CuHM 촉매의 NO 제거활성이 가역적으로 증가하는 반면 $V_2O_5-WO_3/TiO_2$ 촉매는 비가역적으로 저하되는 상반되는 결과를 보였다. 그리고 수분이 포함된 습윤가스 조건에서는 CuHM와 $V_2O_5-WO_3/TiO_2$ 촉매 모두 비가역적으로 활성이 감소됨이 관찰되었으나, 상대적으로 CuHM이 보다 안정적인 활성을 나타내었다. 이러한 활성변화는 $NH_3$ TPD(Temperature Programmed Desorption) 탈착곡선의 증가, 감소로부터 HCl에 따른 일시적인 산량 증가 또는 영구적인 산점의 변화와 관계됨을 알 수 있었다. 그리고 BET 및 ICP 분석을 통하여 염화수소기체에 의한 촉매의 표면적과 $Cu^{{+}{+}}$$V_2O_5$ 함유량의 변화를 관찰하였다. 이상의 연구결과로부터 HCl과 같은 산가스를 함유하고 있는 배기가스 중의 질소산화물을 제거할 경우 CuHM 촉매에 대한 선택적 촉매 환원공정의 적용 가능성을 확인할 수 있었다.

  • PDF

질소산화물 제거를 위한 디스크형 바나디아 촉매담지 세라믹필터의 특성 (Characteristics of Disc-Type V2O5 Catalyst Impregnated Ceramic Filters for NOx Removal)

  • 홍민선;문수호;이재춘;이동섭
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.451-463
    • /
    • 2004
  • The performance of disk-type catalytic filters impregnated by TiO$_2$ or TiO$_2$-3Al$_2$O$_3$ㆍ 2SiO$_2$ supports and V$_2$O$_{5}$ catalyst was evaluated for selective catalytic reduction (SCR) of NO with ammonia as a reductant. XRD, FT -IR, BET and SEM were used to characterize the catalytic filters prepared in this work. Optimal V$_2$O$_{5}$ loading and reaction temperature for V$_2$O$_{5}$/TiO$_2$ catalytic filters were 3-6 wt.% and 350-40$0^{\circ}C$ at GHSV 14,300 $hr^{-1}$ in the presence of oxygen, respectively. With increasing the V$_2$O$_{5}$ loading from 0.5 to 6 wt%, NO conversion increased from 24 to 96% at 40$0^{\circ}C$ and 14.300$hr^{-1}$, and maintained at 80% over in the V$_2$O$_{5}$ loading range of 3-6 wt.% and then dropped at V$_2$O$_{5}$ loading of 7wt.% over. In comparing V$_2$O$_{5}$/ TiO$_2$ and V$_2$O$_{5}$/ TiO$_2$-3Al$_2$O$_3$ㆍ2SiO$_2$ catalytic fillers, which have same 3wt.% V$_2$O$_{5}$ loading, the V$_2$O$_{5}$/ TiO$_2$-3A1$_2$O$_3$ㆍ2SiO$_2$ catalytic filter showed higher activity than V$_2$O$_{5}$/ TiO$_2$ catalytic filter, but higher differential pressure drops owing to its low air permeability. low air permeability.