• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.390-401
• /
• 2000

In this study, numerical calculation is carried out to investigate the influence of injection timing, fuel amount, intake $O_2$ concentration, and EGR on Nitric Oxide(NO) formation using a two-zone model in a diesel engine. Results can be summarized as follows. The NO formation is very sensitive to the burned gas temperature, so multi-zone model must be applied to combustion process to predict the burned gas temperature exactly. Since the burned gas temperature increases rapidly during the premixed combustion, most NO is formed within 20 crank angle degrees after ignition. As the injection timing is retarded, the combustion occurs later in the expansion process which causes the decrease of burned gas temperature and, as a result, NO formation decrease. The increase of fuel amount results in the increase of earlier formation of NO in the engine. As the intake $O_2$ concentration increases, the maximum pressure and burned gas temperature increase due to activate combustion. And, [O] mole fraction of equilibrium combustion products also increase. Therefore NO exponentially increases. If exhaust gas is recirculated, the burned gas temperature decreases which results in NO decrease. If exhaust gas is cooled, more NO can be decreased.

• Journal of Environmental Science International
• /
• v.32 no.5
• /
• pp.285-301
• /
• 2023

This study analyzed characteristics of ozone (O₃) formation regimes in Busan over a period of recent five years (2015~2019) and compared the findings with those obtained in Seoul. We employed four observed variations: early morning commuting-hour (i.e., 06:00-09:00 LST) nitrogen dioxide (NO₂), peak-hour (i.e., 12:00-16:00 LST) O₃, 8-hour average O₃ (MDA8 O₃), and △O₃ (=O_{3_max}- O_{3_min}) in Busan and Seoul. In addition, the NO₂-O₃ relation was assessed to interpret which of NOx-limited or volatile organic compound (VOC)-limited was dominant. In Busan, the annual mean O₃ concentration was relatively higher than in Seoul, whereas there were fewer high-concentration days. The Pearson correlation coefficients (R) between Early morning-hour NO₂ and the Peak-hour O₃ was positive (but close to zero) in Busan and negative in Seoul. Likewise, the R between the Early morning-hour NO₂ and the △O₃ showed a relatively considerable positive correlation (R=+0.4~0.5)(R=+0.4~0.5) in Busan, while a weak positive correlation (R=+0.1~0.2) in Seoul. From this result, it can be inferred that the O₃ formation regime in Busan was intrepreted to be nearly neutral or relatively closer to the NO_x-limited regime than Seoul, while Seoul to the VOC-limited regime. The study findings imply that O₃ control strategies should be applied differently in Busan and Seoul. The results here were inferred from surface NO₂ and O₃ observations, and the varification studies based on in-situ VOCs measurements would be needed.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.4
• /
• pp.201-208
• /
• 2000

The reduction of NO by hydrocarbons was investigated over Cu/Al$_2$O$_3$catalysts using a stainless steel flow reactor under highly oxidising diesel exhaust conditions(up to 15%). Three different Cu loadings(1,5 and 10wt.%) on an $Al_2$O$_3$support were prepared and characterized using spectroscopic techniques. The catalytic activity tests show that different Cu loadings as well as temperature, oxygen, and hydrocarbon concentration levels significantly influence the NO reduction. Increasing Cu loadings up to 5 and 10wt.% decreases the catalytic activities for NO reduction due to the formation of a bulk crystalline CuO phase, as observed from XRD and SEM images. In particular, the visualization of the copper dispersion on the surface using the SEM-BEI technique provides information on the extent of copper saturation, particle size, and the effects on NO reduction. However, the lower Cu loading(1 wt.%) increases the catalytic activity with a temperature window of 720-810K, thereby favoring the formation of well dispersed isolated Cu species, e.g. Cu(sup)2+ ions, which is related to selective NO reduction. The effects of other reaction parameters, such as oxygen, the hydrocarbon level and type, and byproduct emissions are further discussed.

• Journal of Mechanical Science and Technology
• /
• v.15 no.1
• /
• pp.88-97
• /
• 2001

The present study numerically investigates the fuel-air mixing characteristics, flame structure, and pollutant emission inside a double-swirler combustor. A PSR(Perfectly Stirred Reactor) based microstructural model is employed to account for the effects of finite rate chemistry on the flame structure and NO formation. The turbulent combustion model is extended to nonadiabatic flame condition with radiation by introducing an enthalpy variable, and the radiative heat loss is calculated by a local, geometry-independent model. The effects of turbulent fluctuation are taken into account by the joint assumed PDFs. Numerical model is based on the non-orthogonal body-fitted coordinate system and the pressure/velocity coupling is handled by PISO algorithm in context with the finite volume formulation. The present PSR-based turbulent combustion model has been applied to analyze the highly intense turbulent nonpremixed flame field in the double swirler combustor. The detailed discussions were made for the flow structure, combustion effects on flow structure, flame structure, and emission characteristics in the highly intense turbulent swirling flame of the double swirler burner.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.83-90
• /
• 2004

A flywheel-driven rapid compression and expansion machine is developed and utilized for experimental study of homogeneous charge compression ignition combustion. Compression ignition of homogeneous charge in IC engines offers possibilities of realizing ultra-lean engine operation with greatly reduced NOx and particulate formation. Fundamental investigations are carried out in order to better understand this ideal engine combustion mechanism. Perfectly premixed propane-air mixtures of various equivalence ratio are compression-ignited in the rapid compression and expansion machine, and the characteristics of the auto-ignition and the following combustion process are analyzed.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.219-220
• /
• 2003

HONO의 대기 환경 적인 중요성은 오존과 HCHO의 광분해가 활발하지 않은 이른 아침시간에 OH라디칼의 생성원으로서 기여할 수 있기 때문이다. Smog chamber modeling 연구결과에 따르면 오존의 최고 농도와 오존의 형성 속도는 HONO의 광분해와 깊은 관련이 있으며 특히 오존 생성이 VOC-limited한 대기환경에서 특히 두드러진 효과가 있는 것으로 보고되었다. 대기 환경에서 HONO의 생성원으로 현재까지 연구결과 제시된 결과를 살펴보면, 3가지가 대표적으로 가)Homogeneous gas 반응 나)에어로졸 혹은 건물 및 지표면에서의 Heterogeneous 반응, 다)NOx 발생원으로부터의 직접적인 발생으로 조사되고 있으나 상대적인 기여도는 여전히 명확히 밝혀지고 있지 않다. (중략)

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.59-66
• /
• 2000

In this study, We studied flow and combustion characteristics of a Flat Flame Burner(FFB) with swirler. As swirl number increase, the streamlines is proceed close to tile and velocity is large. Blow-off limit decrease when swirl number is 1.24, but blow-off limit increase when combustion load is 6500kcal/hr. Temperature distribution is uniform in front of tile and NO formation is small at S=1.24. We expect that the radiation can be transmitted to the object and NOx will reduce because of recirculation zone

• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.24-32
• /
• 2002

The autoignition and subsequent flame propagation of initially nonpremixed turbulent system have been numerically analyzed. The unsteady flamelet modeling based on the RIF (Representative Interactive Flamelet) concept has been employed to account for the influences of turbulence on these essentially transient combustion processes. In this RIF approach, the partially premixed burning, diffusive combustion and formation of pollutants(NOx, soot) can be consistently modeled by utilizing the comprehensive chemical mechanism. To treat the spatially distributed inhomogeneity of scalar dissipation rate, the multiple RIFs are employed in the framework of EPFM(Eulerian Particle Flamelet Model) approach. Computations are made for the various initial conditions of pressure, temperature, and fuel composition. The present turbulent combustion model reasonably well predicts the essential features of autoignition process in the transient gaseous fuel jets injected into high pressure and temperature environment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.81-89
• /
• 2002

The autoignition and subsequent flame propagation of initially nonpremixed turbulent system have been numerically analyzed. The unsteady flamelet modeling based on the RIF (representative interactive flamelet) concept has been employed to account for the influences of turbulence on these essentially transient combustion processes. In this RIF approach, the partially premixed burning, diffusive combustion and formation of pollutants(NOx, soot) can be consistently modeled by utilizing the comprehensive chemical mechanism. To treat the spatially distributed inhomogeneity of scalar dissipation rate, the multiple RIFs are employed in the framework of EPFM(Eulerian particle flamelet model) approach. Computations are made for the various initial conditions of pressure, temperature, and fuel composition. The present turbulent combustion model reasonably well predicts the essential features of autoignition process in the transient gaseous fuel jets injected into high pressure and temperature environment.

• 한국연소학회:학술대회논문집
• /
• 2000.05a
• /
• pp.152-161
• /
• 2000

The catalytically stabilized combustion of $CH_4$-air mixture on platinum catalyst was investigated numerically using a 2-D boundary layer model with detailed heterogeneous and homogeneous chemistries. The actual surface site density of monolith coated with platinum was decided by the comparison with experimental data. The comparisons were made between results for cases where only heterogeneous chemistry was allowed and both heterogeneous and homogeneous chemistries were allowed. It was found that the homogeneous reaction in the monolith had little effect on the change of temperature profile, methane conversion rate and light off location. The contributions of each reactions related with CO formation were discussed on the surface. The effects of operation conditions such as equivalence ratio, temperature, velocity and pressure at the entrance were studied. In thermal combustor, CO and NOx was produced less than 1 ppm at the exit and the production of $N_{2}O$ was more dominant than that of NO.