• Title/Summary/Keyword: NOx 규제기준

Search Result 33, Processing Time 0.023 seconds

Analyzing the Impact of Emission Control Area (ECA) Enforcement on Ferry Companies' Financial Performance : Network SBM DEA and BTR model (배출규제해역(ECA) 시행이 페리 선사의 재무성과에 미치는 영향: Network SBM DEA 및 BTR 모형 분석)

  • Lee, Suhyung;Lim, Hyunwoo
    • Journal of Korea Port Economic Association
    • /
    • v.38 no.3
    • /
    • pp.29-51
    • /
    • 2022
  • The International Maritime Organization (IMO) designated the Emission Control Area (ECA) in Northern Europe to reduce the NOx and SOx emissions from ships in the coastal areas. This study used Network slack-based measure (SBM) Data Envelopment Model (DEM) and Bootstrop Truncated Regression (BTR) model to analyze the ECA's impact on ferry companies' financial performances based on the financial data from eight ferry carriers in Northern Europe, the Mediterranean and North America from 2004 to 2017. To alleviate the problem of arbitrary variable selection in DEA, the variable selection criteria proposed by Dyson et al. (2001) were applied; the size of the company was considered through the Network SBM DEA model; and the company's profit-generating process was divided into stages to measure financial performance in more detail. In addition, the BTR model was applied to derive results that minimize the bias of the data. The study found that ECA regulations did not always negatively affect the shipping companies' financial performance. Rather, a steady increase in efficiency was observed for Northern European ferry companies which were subject to the strongest regulations. For North American ferry companies, government subsidies were found to have a significant impact on efficiency, and relatively small impact on efficiency due to the ECA and oil prices. For the Mediterranean ferry companies, efficiency values have decreased since the implementation of ECA regulation despite the lowest level of regulation in the region.

대구지역 대기환경용량평가에 관한 연구

  • Choe, Geun-Sik;Kim, Hae-Dong
    • 한국지구과학회:학술대회논문집
    • /
    • 2010.04a
    • /
    • pp.90-91
    • /
    • 2010
  • 우리나라는 산업화와 도시화의 급속한 발전으로 인한 대기오염물질배출시설, 자동차 통행량, 에너지 사용량의 증가 등으로 대기오염물질배출원의 수와 규모가 증대되어 광역도시를 중심으로 대기질이 악화되고 있다. 특히 우리나라의 수도권대기질은 선진국의 주요 도시에 비해 대기오염 상태가 좋지 않은 것으로 평가됨에 따라 정부는 대기질을 OECD선진국 수준으로 개선한다는 목표를 세우고 있으나, 지역의 대기상태 및 그 동안의 대기질 개선을 위해 이행된 정책의 효율성 측면에서 볼 때 사후적인 규제위주의 농도규제 방식으로는 급증하는 대기오염배출시설의 배출량총량 관리가 어렵고, 지자체별로 개별적인 분산관리로는 광역적으로 이동되는 대기오염물질의 관리가 불가능하다. 또한 대기오염과 상관성이 큰 에너지정책, 산업정책, 도시계획 등 관련 정책과의 통합적 접근이 어렵기 때문에 사전에 이를 예방하는 총량관리가 요구되어 진다. 총량규제란 특정지역의 기상, 지형조건 등을 이용하여 대기환경용량을 산출하고 이를 기초로 지역별 배출허용총량을 할당하여 궁극적으로는 오염원별로 대상오염물질의 삭감량을 정하는 제도로 선진국에서는 대기환경용량을 바탕으로 1970년대부터 사업장을 중심으로 배출농도 규제와 함께 총량규제를 병행 실시하고 있으며, 최근에는 자동차에도 실시하고 있다. 우리나라에서도 대기환경보전법 제9조에서 환경기준을 초과하여 사람의 건강이나 재산, 동식물의 생육에 중대한 위해를 가져올 우려가 있다고 인정되는 경우에는 동 지역 또는 특별대책지역 중 사업장이 밀집되어 있는 구역에 대하여 배출되는 오염물질을 총량으로 규제할 수 있도록 규정하고 있다. 또한, 환경부는 2003년도에 서울, 인천, 경기도내 19개시 지역을 대상으로 대기오염물질의 배출총량을 관리하는 대기오염총량제 실시를 포함한 '수도권대기질개선에관한특별법'을 제정하였고, 현재는 사업장에게 연도별 배출허용총량을 할당하고, 할당량 이내로 오염물질을 배출하도록 관리하는 사업장 대기오염물질총량관리 제도로 시행 중에 있다. 그러나 수도권대기질개선특별대책을 수립하면서 총량관리의 본격 이행 및 배출권 거래제도 도입에 대한 특별법안이 제정되고 부분적으로 시행되고 있으나, 우리나라에 총량관리를 본격 이행하는데 있어서의 필요한 준비여건은 아직 초기 단계이고, 관련 연구의 수행실적 또한 수도권에 제한되어 적은 편이다. 따라서 현재는 총량관리가 수도권에 국한하여 실시되고 있으나, 점차 타 도시까지 광역적으로 확대될 것으로 예상되는 바 이에 필요한 제반 사항들에 대한 조사 분석을 통하여 정책방향을 설정하는 더 많은 연구가 필요할 것이다. 이러한 배경에서 본 연구에서는 대구지역을 대상으로 대기오염농도 및 대기오염물질 배출량에 대한 현황조사를 실시하고, 이를 토대로 고농도가 자주 발생되거나 그러할 가능성이 높은 $NO_X$을 대상으로 대기오염기여도를 평가하고 대기확산모델을 통한 대기환경용량을 산정하였다. 대기오염농도 현황을 살펴본 결과, 대구지역의 대기오염은 $NO_2$, $SO_2$, CO는 전형적인 1차오염물질의 변화경향을 보였으며, $PM_{10}$는 봄철에 황사의 영향을 크게 받는 것으로 나타나 실제 대구지역에서 배출되는 양을 추정하기 힘든 것으로 판단된다. 또한 $NO_2$는 공업, 상업지역에서 $SO_2$$PM_{10}$는 공업지역, CO는 상업지역, $O_3$은 교외지역에서 높은 농도를 나타내는 것으로 파악되었다. 대구지역의 대기오염물질 배출량 현황은 CO가 47%, NOX가 43%로 전체 배출량의 90%를 차지하였고, 2005년 이후 $NO_X$는 감소하고 $SO_X$가 증가하는 추세이다. 또한 배출원대분류 중도로 및 비도로이동오염원에서 발생되는 선 오염원이 75%로 대구지역에서 가장 크게 기여하는 것으로 나타났다. ISCST3 대기확산모델을 이용하여 대기환경용량을 산정하기위하여, 먼저 대구지역의 대기환경용량평가는 가시적인 위해성이 높고 개선정책이 용이한 $NO_X$을 대상물질로 선정하였고, 배출량과 오염농도간의 상관도가 0.659로 높은 것으로 판단되어, 배출량을 삭감하였을 때 대기오염농도의 개선이 명확히 나타나는 것을 알 수 있었다. 다음으로, 단위격자 당 한계배출율을 알아내는 작업을 실시하여, 대구지역을 동일하게 장기환경기준 80%수준인 22.4ppb를 만족시키기 위한 한계배출율은 2.23g/s가 필요한 것으로 파악되었고, 산출한 한계배출율을 이용하여 장기환경기준치 80%수준 달성을 목표로 하는 경우의 대기환경용량을 산정하고 실제 배출량과 비교 분석하였다. 그 결과, 대구지역 전체의 환경용량은 약 3만 톤으로 실제 배출량 2만2천 톤에 약 8천 톤 이상의 여유가 있는 것으로 파악되었다. 그러나 구역별로 상이한 차이를 보였으며, 이에 따른 구역별 개선정책이 필요할 것으로 사료된다. 대기환경용량을 파악한 후 단위격자 당 한계배출율을 초과하는 대상 지역을 추출하여 삭감한 결과 초과배출량의 80%를 삭감해야 대구지역 전체에서 50ppb이하 농도가 되는 것을 알 수 있었는데, 실제로 초과배출량의 80%를 삭감하는 것은 어려움이 있다고 판단되어, 대구지역을 동일한 %율로 삭감한 결과 30% 삭감했을 때 50ppb수준을 달성하였고, 50%삭감했을때 2007년 환경기준인 30ppb수준을 달성하였다. 또한 배출원대분류 중 기여율이 높은 도로와 비도로오염원을 50%삭감한 결과 도로이동오염원의 삭감만으로도 상당한 고 배출지역의 농도저감에 효과가 있는 것으로 파악되고, 비도로오염원을 포함하여 삭감하였을 때는 대구지역 전체에서 50ppb이하로 내려가는 것을 볼 수 있었다. 따라서 향후 총량규제의 실시에 맞추어 대구지역의 실제적인 환경용량의 정확한 파악과 고배출지역에 대한 삭감방법에 관한 더 많은 연구가 필요하다고 사료된다. 이 연구 결과는 앞으로 시행될 지역총량규제에 대한 기초적인 방법론으로 활용될 수 있을 것이다.

  • PDF

A Study on the Cold Startability and Emission Characteristics of LPG Vehicle According to Test Temperature (시험온도에 따른 LPG 차량의 저온 시동성 및 배출가스 배출특성 연구)

  • Lee, Min-Ho;Kim, Sung-Woo;Kim, Ki-Ho;Ha, Jong-Han
    • Journal of the Korean Institute of Gas
    • /
    • v.18 no.6
    • /
    • pp.7-13
    • /
    • 2014
  • As the interest on the air pollution is gradually rising up at home and abroad, automotive and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward various main issues : whether PM emissions should be regulated for diesel and gasoline vehicles and whether gasoline and LPG powered vehicles can be further neglected from PM emission inventories. Finally, the greenhouse gas ($CO_2$, $CH_4$, $N_2O$) regulation has been discussed including automotive emission regulation. The greenhouse gas and emissions (PM) particle of automotive had many problem that cause of ambient pollution, health effects. This paper discussed the influence of LPG fuel on automotive cold startability and exhaust emissions gas. Also, this paper assessed emission characteristics due to the test temperature. These test temperature were performed by dividing the temperature of the test mode and the lowest local temperature in winter. Through this study, the correlation of cold startability, exhaust emission and greenhouse gas emission was analyzed.

A Study on the Emissions Characteristics of a LPG Vehicle According to Various Test Modes and Ambient Conditions (다양한 시험모드와 환경조건에 따른 LPG 차량의 배출특성 연구)

  • Lee, Min-Ho;Ha, Jong-Han
    • Journal of the Korean Institute of Gas
    • /
    • v.19 no.4
    • /
    • pp.1-7
    • /
    • 2015
  • As the interest on the air pollution is gradually rising up at home and abroad, automotive and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward various main issues : whether PM emissions should be regulated for diesel and gasoline vehicles and whether gasoline and LPG powered vehicles can be further neglected from PM emission inventories. Finally, the greenhouse gas regulation has been discussed including automotive emission regulation. The greenhouse gas and emissions of automotive had many problem that cause of ambient pollution, health effects. Based on various test modes and ambient conditions, this paper discusses the characteristics of LPG on exhaust emissions and greenhouse gases. Also, this paper assessed emission characteristics due to the test temperature. These test temperature were performed by dividing the temperature of the test mode and the lowest local temperature in winter. Through this study, the correlation of vehicle test mode and ambient condition, exhaust emission, greenhouse gas emission was analyzed.

A suggestion on the incentive and penalty based on carbon tax scheme through EEOI results (EEOI 결과에 따른 탄소세 기반 격려금과 벌과금 부과 방안 제시)

  • Park, Go-Ryong;Cho, Kwon-Hae
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.41 no.4
    • /
    • pp.323-329
    • /
    • 2017
  • Nowadays, considering global warming and enhanced prohibition to discharge pollutants at sea, all of existing operation-ships must lead to the reduction of fuel consumption. International standards of International Maritime Organization and EU rules governing harbor pollutants are being strengthened. Therefore, ship-owners and operators are seeking ways to reduce $CO_2$, SOx, and NOx emissions. Although world trade continues to expand, total fuel usage for sea transport tends to diminish. However, ICS(International Chamber of Shipping) has set a goal of reducing $CO_2$ emissions from shipping by 50% until 2050. In addition, with respect to the Paris Climate Change Accord in 2015, IMO proposes to set up a reduction target of GHG emission from existing operation-ships. For setting up a reduction target of GHG from international maritime transport, "A data collection system for fuel consumption" will be introduced in the near future. In order to effectively reduce the use of fuel in a ship in accordance with the trend of compulsory fuel saving from operation ships, this paper suggested adoption of an Incentive-Penalty scheme based on Emission-Trading-Scheme, Carbon Tax, and basic calculation formula after verifying the EEOI level for a year.

Countermeasures to the Introduction of Low Caloric Gas Fuel for Natural Gas Engine (저열량 가스 적용에 따른 천연가스엔진의 대응 방안 연구)

  • Park, Cheol-Woong;Kim, Chang-gi;Oh, Se-Chul;Lee, Jang-Hee
    • Journal of the Korean Institute of Gas
    • /
    • v.25 no.2
    • /
    • pp.34-41
    • /
    • 2021
  • In order to cope with the problems that may occur when the natural gas used in Korea becomes low in calories, the problems that may have to the domestic industrial gas equipment must be identified in advance, and based on this, countermeasures for efficient use of energy must be preceded. In this study, in order to solve the problem of deterioration of engine output performance and efficiency due to the introduction of low calorific gas when using a lean-burning natural gas engine that complies with the EURO-6 regulation, specific control plans and results based on the experiment are intended to be presented. In order to identify the improvement effect by the control variable represented by the ignition timing under the full load condition at the engine speed of 1,400 rpm and 550 Nm, 2,100 rpm, which is the engine speed at the rated operation condition, the thermal efficiency and exhaust gas characteristics were identified and optimized by changing the ignition timing for each gas fuel. In the case of pure methane, which shows the lowest value based on the torque under the full load condition, if the ignition timing is advanced by about 2 CAD from the reference ignition timing, the torque can be compensated without a large increase in NOx emission.

Effects of Exhaust Gas Recirculation on Power and Thermal Efficiency of Reactivity Controlled Compression Ignition in Different Load Conditions with a 6-L Engine (6 L급 압축착화 기관에서 천연가스-디젤 반응성 조정 연소 시 부하에 따른 배기 재순환율이 출력 및 열효율에 미치는 영향 분석)

  • Lee, Sunyoup;Lee, Seok-Hwan;Kim, Chang-Gi;Lee, Jeong-Woo
    • Journal of the Korean Institute of Gas
    • /
    • v.24 no.6
    • /
    • pp.1-10
    • /
    • 2020
  • Reactivity controlled compression ignition (RCCI) combustion is one of dual-fuel combustion systems which can be constructed by early diesel injection during the compression stroke to improve premixing between diesel and air. As a result, RCCI combustion promises low nitrogen oxides (NOx) and smoke emissions comparing to those of general dual-fuel combustion. For this combustion system, to meet the intensified emission regulations without emission after-treatment systems, exhaust gas recirculation (EGR) is necessary to reduce combustion temperature with lean premixed mixture condition. However, since EGR is supplied from the front of turbocharger system, intake pressure and the amount of fresh air supplementation are decreased as increasing EGR rate. For this reason, the effect of various EGR rates on the brake power and thermal efficiency of natural gas/diesel RCCI combustion under two different operating conditions in a 6 L compression ignition engine. Varying EGR rate would influence on the combustion characteristic and boosting condition simultaneously. For the 1,200/29 kW and 1,800 rpm/(lower than) 90 kW conditions, NOx and smoke emissions were controlled lower than the emission regulation of 'Tier-4 final' and the maximum in-cylinder pressure was 160 bar for the indurance of engine system. The results showed that under 1,200 rpm/29 kW condition, there were no changes in brake power and thermal efficiency. On the other hand, under 1,800 rpm condition, brake power and thermal efficieny were decreased from 90 to 65 kW and from 37 to 33 % respectively, because of deceasing intake pressure (from 2.3 to 1.8 bar). Therefore, it is better to supply EGR from the rear of compressor, i.e. low pressure EGR (LP-EGR) system, comparing to high pressure EGR (HP-EGR) for the improvement of RCCI power and thermal efficiency.

Development of Oxy-fuel Combustor for the Underwater SMV(Sub-Merged Vaporizer) (수중연소식 천연가스기화기(SMV)용 순산소 연소기 개발)

  • Sohn, Whaseung;Kim, Hoyeon;Jeong, Youngsik
    • 한국연소학회:학술대회논문집
    • /
    • 2014.11a
    • /
    • pp.253-254
    • /
    • 2014
  • 지구온난화 문제는 한국가의 문제가 아니라 인류의 문제로 대두되어 많은 이에대한 많은 연구가 이루어 지고 있다. 지구온난화의 주 대상물질인 화석연료로부터 연소시 발생하는 이산화탄소를 감축하기위한 많은 규제와 노력이 요구된다. CCS(Carbon Capture & Storage)란 화석연료로 부터 연소시 대기 중으로 배출되는 온실가스($CO_2$)를 포집하여 재생 또는 지중, 해양에 저장하는 기술로서 국가녹색성장 핵심기술중의 하나로 분류되며, $CO_2$ 회수방안, 저장, 처리관련 연구를 비롯하여 국내외 적으로 활발한 연구가 이루어 지고 있다. 또한 순산소 연소기술을 통한 $CO_2$ 회수, 처리기술은 연료의 산화제를 공기대신 순도 95% 이상의 고농도 산소를 이용하여 순산소연소를 하며, 이때 발생하는 배가스의 대부분은 $CO_2$와 수증기로 구성되어 있다. 발생된 배가스의 약 70~80%를 다시 연소실로 재순환시켜 연소기의 열적 특성에 적절한 연소가 가능하도록 최적화함과 동시에 배가스의 $CO_2$ 농도를 80% 이상으로 농축시켜 회수를 용이하게 하며, 동시에 공해물질은 NOx 발생량을 10ppM 이하로 줄일 수 있는 기술이다. 천연가스를 생산하는 LNG기지에서 연소에 의한 이산화탄소를 발생시키는 기기로는 수중연소식기화기(SMV ; Submerged Combustion Vaporizer)를 들 수 있다. SMV는 버너를 이용하여 $-162^{\circ}C$ LNG를 $10^{\circ}C$의 LN로 기화시키는 설비로서 특히 동절기에 작동시키며 $CO_2$를 배출시키는 연소기다. 본 연구에서는 수중연소식 SMV에 순산소 연소방식을 적용하여 천연가스와 산소를 연소시키므로서 발생되는 $CO_2$를 LNG냉열을 이용 액체화 시켜 회수하는 연구를 수행하고 있다. 내용중에 수중연 소식 SMV에 대한 순산소 연소기를 개발하는 연구를 수행하였으며, 실제 SMV의 1/10크기, 열량기준 1/900로 모형을 제작하여 실험하였다. 연소기 노즐 은 직경 0.6mm, 배가스가 수조내에서 48개의 노즐을 제작하였다. 실험결과 일정량 이상의 $CO_2$ EGR율이 일정 값 이상이 되면 화염의 길이가 공기/NG 화염 길이와 큰 차이가 없었으며 $CO_2$ EGR율이 100%이상에서는 $CO_2$ EGR율 증가에 따른 화염길이 변화는 크게 나타나지 않았다. CO 배출 농도는 공기/NG 연소의 경우보다 높게 나타났으며, ${\lambda}$가 1.4보다 높은 조건에서는 측정되지 않았다. NOx의 배출 농도는 약 1~8ppm으로 나타났다.

  • PDF

FMEA of Electrostatic Precipitator for Preventive Maintenance (전기집진기 예지보전 단계에서의 고장모드영향분석)

  • Han, Seung-Hun;Lee, Jeong-Uk;Lee, Sun-Youp;Hwang, Jong-Deok;Kang, Dae-Kon
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.26 no.6
    • /
    • pp.706-714
    • /
    • 2020
  • Currently, 90 % of the world's population breathes air with a fine dust content exceeding the World Health Organization's annual average exposure limit (10 ㎍/㎥). Global efforts have been devoted toward reducing secondary pollutants and ultra-fine dust through regulations on nitrogen oxides released over land and sea. Domestic efforts have also aimed at creating clean marine environments by reducing sulfur emissions, which are the primary cause of dust accumulation in ships, through developing and distributing environment-friendly ships. Among the technologies for reducing harmful emissions from diesel engines, electrostatic precipitator offer several advantages such as a low pressure loss, high dust collection efficiency, and NOx removal and maintenance. This study aims to increase the durability of a ship by improving equipment quality through failure mode effects analysis for the preventive maintenance of an electrostatic precipitator that was developed for reducing fine dust particles emitted from the 2,427 kW marine diesel engines in ships with a gross tonnage of 999 tons. With regard to risk priority, failure mode 241 (poor dust capture efficiency) was the highest, with an RPN of 180. It was necessary to determine the high-risk failure mode in the collecting electrode and manage it intensively. This was caused by clearance defects, owing to vibrations and consequent pin loosening. Given that pin loosening is mainly caused by vibrations generated in the hull or equipment, it is necessary to manage the position of pin loosening.

Study on the Characteristics of Exhaust Emissions in accordance with the Intake Manifold and Fuel Injector Maintenance of the Electronic Control Diesel Engine (전자제어 디젤엔진의 흡기 다기관 및 연료분사장치 정비에 따른 매연 배출특성에 관한 연구)

  • Kang, Hyun-Jun;Kim, Tae-Jung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.9
    • /
    • pp.196-205
    • /
    • 2016
  • The exhaust gas discharged by cars not only threatens the health of the human body, but also contributes to global warming, due to the resulting increase in the concentrations of ozone, fine dust and carbon dioxide. Therefore, the government has steadily implemented careful inspection systems for exhaust emissions, in order to efficiently regulate the exhaust gas of cars. Studies on reducing the exhaust emissions of automobiles have been conducted in various fields, including ones designed to reduce the generation of HC, NOx, and $CO_2$ in the exhaust emission of vehicles. However, there have been insufficient studies on the reduction of the exhaust emission for old diesel vehicles. To develop careful inspection systems for the exhaust emissions of old diesel vehicles, studies on the reduction of the exhaust emissions and improvement of power are necessary by cleaning the carbon sediment in both the intake manifold and injector. Therefore, in this study, we analyzed and compared the amounts of gas emitted when simultaneously cleaning or not cleaning the intake manifold and injector of diesel automobiles with mileages over 80,000 km and operating periods over 5 years. The experimental results showed that in the case where the intake manifold and injector were simultaneously cleaned, there was a decline of 75.2% in the gas emission compared to the cases where only the manifold or injector is cleaned. Also, it was found that simultaneously cleansing the intake manifold and injector enabled the exhaust standard to be satisfied for less than 30% within 8.5 sec.