• 한국항만경제학회지
• /
• 제36권3호
• /
• pp.21-38
• /
• 2020

최근들어 항만도시에서의 대기오염이 심각한 문제로 대두되고 있다. 그러나 항만의 하역기계에서 배출되는 온실가스는 선박, 트럭 등 타 수단에 비해 상대적으로 주목받지 못하였다. 본 연구에서는 인천항에서 디젤엔진으로 가동되는 하역기계로부터 배출되는 대기오염물질 배출량을 산정하였다. 이를 위해 각 항만하역사로부터 2017년 기준 하역장비의 대수, 제원, 가동시간 등 활동자료를 수집하였다. 분석 결과, CO 105.6톤, NOX 243.2톤, SOX 0.005톤, PM 22.8톤, VOC 26.0톤, NH3 0.2톤이 발생한 것으로 나타났다. CO와 NOX의 배출은 하역기계 전체 배출량의 87.71%를 차지하였으며, 크레인, 지게차, 트랙터, 로더의 배출량이 하역기계 전체 배출량의 84.79%를 차지하였다. 또한 노후화된 디젤엔진을 장착한 하역기계가 주 배출원임을 규명하였다. 분석된 대기오염물질 배출량 수치는 하역기계에 의한 항만 대기 오염의 심각성을 나타내며, 다음과 같은 친환경장비 도입이 시급함을 시사한다. 첫째, 오래된 디젤 장비의 LNG연료 또는 전기장비로의 교체가 필요하다. 둘째, NOX의 배출을 감소시킬 수 있는 선택적환원촉매(SCR)와 같은 후처리장비의 사용이 필요하다. 향후 체계적이고 공식적인 국가 대기오염배출 인벤토리 정립 방법을 설정하고, 매년 하역기계에서 배출되는 대기오염물질 배출량을 모니터링 및 평가하는 것이 필요하다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권9호
• /
• pp.870-875
• /
• 2015

디젤 엔진은 출력 및 연료소비율이 우수하여 많이 사용되고 있다. 그러나 디젤엔진은 가솔린엔진에 비하여 배출가스 저감 기술 등에서 아직 해결해야할 문제점들이 많고, 대기오염의 주범이다. 디젤엔진에 있어 배기가스 재순환(EGR; Exhaust Gas Recirculation) 기술은 여러 촉매 기술에 비해 질소산화물(NOx) 배출 저감을 위한 가장 효과적인 기술이며 또한 경제성, 적용 가능성 측면에서도 많은 장점을 갖고 있다. 본 연구에서는 EGR 시스템을 장착한 디젤 엔진을 대상으로 EGR이 디젤기관의 출력 성능 및 배기특성에 미치는 영향을 고찰하였고, 다음과 같은 결론을 얻었다. EGR율이 증가함에 따라 IHP 및 BHP는 감소하며, 순수EGR에 의한 영향은 엔진회전수에 따라 차이는 있지만, 순수 EGR에 의한 BHP는 저속 운전에서는 약 9%, 고속운전에서는 3.5% 정도 감소하였다. 그리고 NOx는 EGR율이 증가함에 따라 감소하고, 엔진회전수 증가할수록 증가한다. 또한 매연(smoke)은 EGR율이 증가함에 따라서 증가하고, 엔진회전수가 증가할수록 감소한다. EGR율에 따라 NOx와 매연 배출을 동시에 최소로 할 수 있는 최적의 운전 상태가 존재하며, EGR율이 증가할 수록 NOx 및 매연을 위한 최적운전 속도는 증가한다.

• 청정기술
• /
• 제24권4호
• /
• pp.307-314
• /
• 2018

본 연구에서는 NMO (Natural Manganese Ore), $MnO_2$, $Mn_2O_3$ 촉매를 산소 존재 하에 저온에서 $NH_3$를 환원제로 이용하여 질소산화물(NOx)을 제거하는 선택적 촉매 환원법에 사용되었다. NMO의 경우, 안정성 실험에서 질소산화물 전환율이 423 K에서 100시간 후에도 변하지 않는 것을 확인하였다. 동력학 실험의 경우, 열 및 물질전달이 영향을 주지 않는 영역에서 수행하였다. 정상상태에서의 반응속도 연구는 저온 SCR반응에서 암모니아에 대하여 0차이고 일산화질소에 대해서는 0.41 ~ 0.57차였으며 산소에 대해서는 0.13 ~ 0.26차인 것을 확인하였다. 온도가 증가할 때, 암모니아와 산소 농도의 결과에 따라 반응차수가 감소함을 확인하였다. 촉매 표면에 해리흡착 된 암모니아와 가스상 일산화질소(E-R 모델)와의 반응 및 흡착 된 일산화질소(L-H 모델)와의 반응을 확인하였다.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.53-62
• /
• 2017

PURPOSES : This research was a fundamental study on the application of an integral $TiO_2$ solution to asphalt concrete pavement. The integral $TiO_2$ solution was produced in pilot production equipment; application of the integral $TiO_2$ solution to asphalt pavement was conducted to examine the pollution-reducing capability of photocatalytic compounds such as $TiO_2$. The photocatalytic $TiO_2$ reacted with air pollutants, converting them into small amounts of relatively benign molecules. METHODS : In this study, laboratory experiments were conducted using five various testing methods. Tensile strength ratio (TSR) and British pendulum test (BPT) were conducted in order to evaluate the properties of asphalt pavement subsequent to the integral $TiO_2$ solution coating. In addition, methylene blue testing, a measurement of nitrate on the coated pavement, and nitrogen oxide (NOx) reduction testing were conducted in order to evaluate photocatalytic reaction. Lastly, a UV-A lamp was used as a light source for photocatalytic reactions. RESULTS : Test results indicated no change in the properties of asphalt pavement following the integral $TiO_2$ solution coating. In order to evaluate the performance of asphalt pavement as a function of $TiO_2$, the moisture susceptibility and skid resistance were investigated. The moisture susceptibility and skid resistance satisfied there quirements related to pavement quality and safety specification. Furthermore, the effects of reduction of air pollution were significantly improved as determined via the methylene blue test and NOx reduction test. The $TiO_2$-paved asphalt specimen exhibited approximately 43% reduction of NOx. CONCLUSIONS : This study has suggested that applying $TiO_2$ rarely impacts asphalt pavement performance measures such as moisture susceptibility and skid resistance, and that its application may be a better means of reducing air pollution. Further studies, such as proper $TiO_2$ dosage rates and compatibility with various pavement types, are required to broaden and generalize its application.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.1017-1026
• /
• 2014

Urea-SCR 머플러 시스템 입구와 촉매 전단에 설치된 다공튜브는 우레아 수용액 분무의 균일분포, SCR 촉매 활용도 증대 및 암모니아 슬립을 방지하기 위해 사용되고 있다. 다공튜브의 오리피스 면적비 변화가 머플러 챔버 내부유동 특성에 끼치는 영향이 상용 소프트웨어를 이용하여 해석적으로 조사되었다. 다공튜브 오리피스 면적비 변화는 촉매 전단에 설치된 챔버 내부의 벌크 선회유동 형성과 촉매 전단 속도분포의 균일도 지수에 큰 영향을 끼침을 보였다. 해석결과를 검증하기 위해 엔진실험이 ESC 및 ETC 모드에서 수행되었다. 엔진 실험결과 다공튜브 길이방향으로 보다 많은 유량이 흐르는 모델이 가장 높은 NOx 저감 효율을 나타냈으며, 이것은 높은 균일도지수 및 강한 선회유동을 나타내는 해석 결과와 일치됨을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권7호
• /
• pp.1030-1035
• /
• 2008

Recently, the International Maritime Organization makes an effort for an effective solution against the emissions from shipping in the international maritime industry. The objective of the study was to quantify the exhaust emissions of marine heavy fuel oil in the combustion process of the spray flame. An experiment was performed to measure CO, $CO_2$, NOx, $SO_2$, ${N_2}O$, DS, SOF and the other components with the flame temperature. The sampling probe was directly set up in the flame fields at each position of 103, 324, 545, 766 and 987mm vertically apart from the fuel-injected nozzle in the burner furnace. From the results of the study, it was estimated that approximately 270ppm of oxides of nitrogen (NOx), $1000{\sim}1400ppm$ of sulfur dioxide ($SO_2$), 8ppm of nitrous oxide (${N_2}O$), $2.0{\sim}2.5g/m^3$ of particulate matter (PM) divided with dry soot (DS) and soluble organic fraction (SOF) and $60{\sim}80mg/m^3$ of sulfuric acid. With respect to further development of this work, the emission quantification could also be applied to assessing emission reduction from the international shipping.

• Advances in Energy Research
• /
• 제7권1호
• /
• pp.35-52
• /
• 2020

The paper proposes a hybrid approach of artificial bee colony (ABC) and grey wolf optimizer (GWO) algorithm for multi-objective and multidimensional engine optimization of a converted plug-in hybrid electric vehicle. The proposed strategy is used to optimize all emissions along with brake specific fuel consumption (FC) for converted parallel operated diesel plug-in hybrid electric vehicle (PHEV). All emissions particulate matter (PM), nitrogen oxide (NOx), carbon monoxide (CO) and hydrocarbon (HC) are considered as optimization parameters with weighted factors. 70 hp engine data of NOx, PM, HC, CO and FC obtained from Oak Ridge National Laboratory is used for the study. The algorithm is initialized with feasible solutions followed by the employee bee phase of artificial bee colony algorithm to provide exploitation. Onlooker and scout bee phase is replaced by GWO algorithm to provide exploration. MATLAB program is used for simulation. Hybrid ABC-GWO algorithm developed is tested extensively for various values of speeds and torque. The optimization performance and its environmental impact are discussed in detail. The optimization results obtained are verified by real data engine maps. It is also compared with modified ABC and GWO algorithm for checking the effectiveness of proposed algorithm. Hybrid ABC-GWO offers combine benefits of ABC and GWO by reducing computational load and complexity with less computation time providing a balance of exploitation and exploration and passes repeatability towards use for real-time optimization.

• 설비공학논문집
• /
• 제28권7호
• /
• pp.275-282
• /
• 2016

MILD (Moderate and Intense Low-oxygen Dilution) combustion using oxygen as an oxidizer is considered as one of the most promising combustion technologies for high energy efficiency and for reducing nitrogen oxide and carbon dioxide emissions. In order to investigate the effects of nozzle angle and oxygen velocity conditions on the formation of oxygen-MILD combustion, numerical and experimental approaches were performed in this study. The numerical results showed that the recirculation ratio ($K_V$), which is an important parameter for performing MILD combustion, was increased in the main reaction zone when the nozzle angle was changed from 0 degrees to 15 degrees. Also, it was observed that a low and uniform temperature distribution was achieved at an oxygen velocity of 400 m/s. The perfectly invisible oxy-MILD flame was observed experimentally under the condition of a nozzle angle of $10^{\circ}$ and an oxygen velocity of 400 m/s. Moreover, the NOx emission limit was satisfied with NOx regulation of less than 80 ppm.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.125-131
• /
• 2013

This study was carried out to develop a diesel engine for marine propulsion. This marine diesel engine was developed based on a 500Ps vehicle diesel engine. Many main parts, such as the intercooler, radiator, and engine controller were designed for the marine diesel engine. The intercooler was designed to be of sea water cooling type; inlet air is cooled by sea water. Engine coolant is cooled by sea water in the radiator too. The water cooling heat exchanger has high cooling performance. In the cooling system, consists of the intercooler and the radiator, the sea water passes through the intercooler and then the radiator, in sequence. This process is very effective compared to the reverse method in which sea water passes through the radiator and then the intercooler, in sequence. The control performance of the engine controller and the fuel injection rate were improved using an engine speed controller. This system was tested on an engine dynamometer and an exhaust gas analyzer using the marine diesel engine test method. Test results show that the 500Ps marine diesel engine satisfied the IMO NOx regulations; Tier II.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.58-64
• /
• 2006

Homogeneous charge compression ignition(HCCI) combustion is an advanced technique for reducing the hazardous nitrogen oxide(NOx) and particulate matter(PM) in a diesel engine. NOx could be reduced by achieving lean homogeneous mixture resulting in combustion temperature. PM could be also reduced by eliminating fuel-rich zones which exist in conventional diesel combustion. However previous researches have reported that power-output of HCCI engine is limited by the high intensive knock and misfiring. In an attempt to extend the upper load limit for HCCI operation, supercharging in combination with Exhaust Gas Recirculation(EGR) has been applied: supercharging to increase the power density and EGR to control the combustion phase. The test was performed in a single cylinder engine operated at 1200 rpm. Boost pressures of 1.1 and 1.2 bar were applied. High EGR rates up to 45% were supplied. Most of fuel was injected at early timing to make homogeneous mixture. Small amount of fuel injection was followed near TDC to assist ignition. Results showed increasing boost pressure resulted in much higher power-output. Optimal EGR rate influenced by longer ignition delay and charge dilution simultaneously was observed.