• Clinical and Experimental Reproductive Medicine
• /
• 제49권1호
• /
• pp.62-69
• /
• 2022

Objective: This study aimed to describe a distinct subpopulation of azoospermic patients with isolated elevation of follicle-stimulating hormone (iFSH) and poor outcomes of microdissection testicular sperm extraction (microTESE). Methods: A retrospective analysis of microTESE outcomes was conducted among 565 patients with non-obstructive azoospermia (NOA). Testicular pathology was assessed by the dominant histological pattern and Bergmann-Kliesch score (BKS). Descriptive statistics were presented for the iFSH subgroup. Inhibin B levels, the sperm retrieval rate (SRR), and BKS were compared in iFSH patients and other NOA patients. Results: The overall SRR was 33.3% per microTESE attempt. The median BKS was 0.6 (interquartile range, 0-2). Of all NOA patients, 132 had iFSH, and microTESE was successful only in 11 of those cases, with an SRR of 8.3%, while the total SRR in other NOA patients was 38.1% (p<0.001). iFSH had a sensitivity of 32.1% (95% confidence interval [CI], 27.4%-36.8%) and specificity of 94.1% (95% CI, 90.8-97.5%) as a predictor of negative microTESE outcomes. Conclusion: Patients with iFSH may harbor a distinct testicular phenotype with total loss of the germ cell population and poor outcomes of surgical sperm retrieval.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.396-396
• /
• 2012

$TiO_2$ anatase nanotube arrays (NTAs) were grown by electrochemical anodization and followed annealing of Ti foil. Ethylene glycol/$NH_4F$-based organic electrolyte was used for electrolyte solution and using second anodization process to obtain free-standing NTAs. After obtaining NTAs, ITO film was deposited by sputtering process on bottom of NTAs. UV-curable NOA was used for attach free-standing NTAs on flexible plastic substrate (PEN). Solid state electrolyte (spiro-OMeTAD) was coated via spin-coating method on top of attached NTAs. Ag was deposited as a counter electrode. Under AM 1.5 simulated sunlight, optical characteristics of devices were investigated. In order to use flexible polymer substrate, processes have to be conducted at low temperature. In case of $TiO_2$ nano particles (NPs), however, crystallization of NPs at high temperature above $450^{\circ}C$ is required. Because NTAs were conducted high temperature annealing process before NTAs transfer to PEN, it is favorable for using PEN as flexible substrate. Fabricated flexible solid-state DSSCs make possible the preventing of liquid electrolyte corrosion and leakage, various application.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.59-64
• /
• 2004

We have fabricated the polymer dispersed liquid crystal (PDLC) cell where a control of phase separation is very important. The factors to influence the phase separation are mixing ratio of LC and polymer, curing temperature and UV intensity. In this paper, we inspected the change of a phase separation as a function of curing temperature for the mixture of E7 and. NOA65 with different ratios. When the LC concentration is less than polymer such as LC:NOA65 = 40:60wt％, the PDLC cell is influenced strongly by the curing temperature. However, when the LC concentration is much less than polymer such as LC:NOA65 = 80:20wt％, it is influenced slightly by the curing temperature. The reason is because the mixture shows upper critical solution temperature behavior and therefore it is important to know the behavior of phase separation as a function of curing temperature of the mixture.

• International Journal of Computer Science & Network Security
• /
• 제24권1호
• /
• pp.31-44
• /
• 2024

People have been using more energy in the last years. Several research studies were conducted to develop sustainable energy sources that can produce clean energy to fulfill our energy requirements. Using renewable energy sources helps to decrease the harm to the environment caused by conventional power plants. Choosing the right location and capacity for DG-RESs can greatly impact the performance of Radial Distribution Systems. It is beneficial to have a good and stable electrical power supply with low energy waste and high effectiveness because it improves the performance and reliability of the system. This research investigates the ideal location and size for solar and wind power systems, which are popular methods for producing clean electricity. A new artificial intelligent algorithm called Nutcracker Optimization Algorithm (NOA) is used to find the best solution in two common electrical systems named IEEE 33 and 69 bus systems to examine the improvement in the efficiency & reliability of power system network by reducing power losses, making voltage deviation smaller, and improving voltage stability. Finally, the NOA method is compared with another method called PSO and developed Hybrid Algorithm (NOA+PSO) to validate the proposed algorithm effectiveness and enhancement of both efficiency and reliability aspects.

• 한국통신학회논문지
• /
• 제40권11호
• /
• pp.2218-2229
• /
• 2015

최근 Wi-Fi Alliance에서는 기존의 Wi-Fi 망에서 이동성을 갖는 무선 단말들이 중개기나 라우터가 없이 언제 어디서나 직접 통신이 가능한 Wi-Fi direct라는 새로운 표준 기술을 발표하였다. Wi-Fi direct에서 기기는 기존의 Wi-Fi 망에서 AP역할을 하는 Group Owner (GO)와 GO와 연결되어 있는 client로 구분되어 존재한다. 일반적으로 client들은 휴대성을 위해 제한된 배터리 용량을 갖기 때문에, 기기들의 에너지 소모가 효율적으로 이루어져야 한다. 이에 따라 GO의 에너지소모를 막기 위하여 두 가지 전력관리기법 Opportunistic기법과 Notice Of Absence (NOA)기법이 사용되었으나 이 두 기법은 트래픽 패턴 등의 특성을 고려하지 않아 에너지 효율성이 높지 않다. 이에 본 논문에서는 멀티미디어 트래픽의 특성을 파악하여 Wi-Fi direct power saving의 에너지 효율성을 높이기 위한 알고리즘을 제시한다. 제안하는 알고리즘은 NOA 기법에서 동적으로 변하는 비디오 프레임의 분포를 활용하여, 다음 비콘 구간에 도착할 비디오 프레임의 예상 크기에 따라서 GO의 awake 구간을 동적으로 조절함으로써, 불필요한 에너지 소모를 감소한다. 또한 비디오 프레임의 상호 의존성을 고려하여 비디오 프레임의 종류별로 우선 순위를 부여하고, 이를 바탕으로 우선순위가 높은 비디오 프레임이 높은 확률로 전송될 수 있도록 awake 구간을 결정함으로써 전송 효율을 높인다. 모의실험 결과 제안한 알고리즘이 NOA 기법에 비해 전송 지연이 더 짧고 에너지 효율이 더 높다는 것을 확인하였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제43권4호
• /
• pp.221-227
• /
• 2016

Objective: The aim of this study was to evaluate the influence of maternal age on fertilization, embryo quality, and clinical pregnancy in patients undergoing intracytoplasmic sperm injection (ICSI) using testicular sperm from partners with azoospermia. Methods: A total of 416 ICSI cycles using testicular spermatozoa from partners with obstructive azoospermia (OA, n = 301) and non-obstructive azoospermia (NOA, n = 115) were analyzed. Female patients were divided into the following age groups: 27 to 31 years, 32 to 36 years, and 37 to 41 years. The rates of fertilization, high-quality embryos, clinical pregnancy, and delivery were compared across maternal age groups between the OA and NOA groups. Results: The rates of fertilization and high-quality embryos were not significantly different among the maternal age groups. Similarly, the clinical pregnancy and delivery rates were not significantly different. The fertilization rate was significantly higher in the OA group than in the NOA group (p< 0.05). Age-group analysis revealed that the fertilization and high-quality embryo rates were significantly different between the OA and NOA groups in patients aged 27 to 31 years old, but not for the other age groups. Although the clinical pregnancy and delivery rates differed between the OA and NOA groups across all age groups, significant differences were not observed. Conclusion: In couples using testicular sperm from male partners with azoospermia, pregnancy and delivery outcomes were not affected by maternal age. However, women older than 37 years using testicular sperm from partners with azoospermia should be advised of the increased incidence of pregnancy failure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1229-1232
• /
• 2004

The ratio of optimized concentration on optical characteristics for phase-separated composite organic films (PSCOF) liquid crystal display is 30% of pre-polymer (NOA65) and 70% of ferroelectric liquid crystal (Felix). The layer structure in ferroelectric liquid crystal cell made by 30% NOA65 and 70% Felix materials is tilt-bookshelf layer structure. The angle of tilt-bookshelf structure are 17$^{\circ}$, 12$^{\circ}$ which are almost same of tilt angle of ferroelectric liquid crystal in Sm $C^{\ast}$ phase. We know that this result is from compensating the layer buckling. In this paper, we will discuss the effect of layer structure in PSCOF cell on ratio of concentration between pre-polymer and liquid crystal by x-ray measurements. We believe that technology of PSCOF is a good solution to solve the problems of align-defect and mechanical shock for future TV application and plastic LCD.

• Macromolecular Research
• /
• 제17권4호
• /
• pp.232-239
• /
• 2009

This paper describes the simple nanopatterning of proteins on polyelectrolyte surfaces using microcontact printing with a nanopatternable, hydrophilic composite nanomold. The composite nanomold was easily fabricated by blending two UV-curable materials composed of Norland Optical Adhesives(NOA) 63 and poly(ethylene glycol) dimethacrylate(PEG-DMA). NOA 63 provided stable nanostructure formation and PEG-DMA induced high wettability of proteins in the nanomold. Using the composite mold and functionalized surface with polyelectrolytes, the fluorescent, isothiocyanate-tagged, bovine serum albumin(FITC-BSA) was successfully patterned with 8 nm height and 500 nm width. To confirm the feasibility of the protein assay on a nanoscale, a glycoprotein-lectin assay was successfully demonstrated as a model system. As expected, the lectins correctly recognized the nano-patterned glycoproteins such as chicken ovalbumin. The simple preparation of composite nanomold and functionalized surface with a universal platform can be applied to various biomolecules such as DNA, proteins, carbohydrates, and other biomolecules on a nanoscale.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권5호
• /
• pp.753-762
• /
• 2020

Objective: The aim of the present study was to determine the effect of supplementing pasture-finished steers with corn silage on the expression level of the calpain system proteins and beef tenderization. Methods: Thirty Braford steers grazing on summer pasture were used for the study. For 120 days fifteen animals were supplemented with corn silage at 1% of body weight per head per day (Suppl) whereas the remaining 15 steers only received pasture (Contr). Carcass and meat traits were evaluated and compared between groups. Gene expression and activities of proteases (calpain 1 and calpain 2) and inhibitor (calpastatin) were measured using real-time polymerase chain reaction and casein zymography. Results: Carcass and meat traits were significantly different between feeding systems. Supplemented steers showed higher hot carcass weight (p<0.01), fat content (p = 0.02), and Warner-Bratzler shear force (p = 0.03). Furthermore, the control group showed higher protease:inhibitor ratios, at mRNA (p = 0.01) and protein levels (p<0.10). Warner-Bratzler shear force and mRNA calpains:calpastatin ratio were associated in both feeding systems (p<0.01). Conclusion: Based on the results obtained in the study, beef tenderness differences among finishing strategies could be modulated through differential expression of the calpain system proteins.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1050-1053
• /
• 2003

Polymer dispersed liquid crystal mode can be classified into two cases, normally scattering mode (NS) and normally transparent (NT) mode according to an initial state. Electro-optic characteristic NS/NT PDLC mode can be improved by controlling the factors to influence the phase separation. In case of NS PDLC mode, we inspected change of a phase separation as a function of curing temperature for the mixture of E7 and NOA65 with different ratios. When the LC concentration is less than polymer such as LC : NOA65 = 40 : 60wt%, the PDLC cell is influenced strongly by the curing temperature. However, when LC concentration is much less than polymer such as LC : NOA65 : 80 : 20wt%, it is influenced slightly by the curing temperature. In case of NT PDLC mode, we observed change of a phase separation as a function of the ratio of the mixture and UV conditions such as curing temperature, UV intensity The cell made with strong UV intensity and curing temperature of $20^{\circ}C$, in case that the ratio of LC to polymer is 70:30wt%, showed good electro-optic characteristics.