• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.194-200
• /
• 2000

The diffusion coefficients in polyimide/N-methyl-2-pyrrolidone (NMP) systems were proposed using tile Vrentas-Duda's hole free volume theory. Several free volume parameters included in the diffusion coefficients were obtained from the fundamental physical properties of polyimide and NMP and group contribution theory, and the pre-exponential diffusion coefficient, D$_{0}$ was also determined from the dynamic swelling behavior of polyimide in NMP solution. The experimental swelling behavior of polyimide films in NMP was well described by the theoretical one using the proposed diffusion coefficient.t.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.2
• /
• pp.115-120
• /
• 2010

The formidable barrier property of the stratum cornemum and the high hydrophilicity of active ingredient make it difficult to permeate through the skin and reach to its site of action. The aim of this study was to investigate the effect of chemical penetration enhancers on the skin permeation of a hydrophilic cosmetic active ingredient, such as arbutin. The enhancing effects of N-methyl-2-pyrrolidone (NMP) on the permeation of a hydrophilic cosmetic active ingredient were evaluated by using Franz diffusion cell. The study indicated that NMP has considerable influence on the skin permeability. NMP was not only the most effective enhancer but also increased the skin permeability of arbutin approximately 1.3~1.5 fold compared with control without penetration enhancer. The lag time did not change with NMP, which suggested no effect of NMP on skin lipid fluidity. This suggest that arbutin co-permeated with NMP. The results indicate NMP is effective enhancer of a hydrophilic cosmetic active ingredient in penetration, with potential applications for drug delivery system.

• Clean Technology
• /
• v.18 no.4
• /
• pp.347-354
• /
• 2012

In this study, simulation works have been performed for the $CO_2$ removal process contained in the DME production process using NMP (N-methyl-2-pyrrolidone) as a solvent. PRO/II with PROVISION release 9.1 at Invensys was used as a chemical process simulator and NRTL activity coefficient model with Henry's law option and Soave-Redlich-Kwong equation of state were used for thermodynamic models. For the determination of the binary interaction parameters in NRTL model, regression works have been performed to match the experimental thermodynamic data. Optimal feed tray location which minimizes the reboiler heat duty was determined.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.26-32
• /
• 2000

Preparation and characteristics of a matrix retaining electrolyte using SiC whisker, PES binder, and NMP(n-methyl-2-pyrrolidone) as a non-volatile solvent for a phosphoric acid fuel cell were investigated. The conditions of binder and plasticizer, and the effects of substituting a volatile solvent by a non-volatile solvent were also studied. The minimum amount of the binder was about 17 wt% for the proper bubble pressure and surrounding SiC whiskers. And the maximum amount of the plasticizer was about 10wt% to be fitted into the polymer chain of the binder. The matrix prepared by using a non-volatile solvent needed longer time to dry, and its pore size was smaller compared with that of the matrix prepared by using volatile solvent. The small pore size resulted in decrease of the overall pore volume. The ionic conductivity in the condition of the same thickness was decreased due to decrease of phosphoric acid absorbancy. As the internal resistance of the electrolyte increased, the fuel cell performance slightly decreased.

• Journal of Veterinary Clinics
• /
• v.23 no.4
• /
• pp.400-404
• /
• 2006

This study demonstrates the anti-arthritic effect of topical application of ketoprofen gel containing N-methyl-2-pyrrolidone (NMP) in adjuvant arthritis therapy. Adjuvant arthritis was induced by a single injection of Freund's complete adjuvant (FCA). Mature female Sprague-Dawley rats were designated to 3 groups such as control group, K10 group (ketoprofen 10 mg/rat), and NK10 group (ketoprofen 10 mg/rat containing NMP). The anti-arthritic activity of ketoprofen containing NMP was tested not only as to its capability to suppress the inflammatory edema, but also bone damage (X-ray score and regional bone uptake) of the hind paw in arthritis-induced rats. These results showed a higher efficacy of ketoprofen containing NMP than ketoprofen treatment in the adjuvant-induced arthritis. Ketoprofen containing NMP has good intrinsic characteristics for formulation in an efficacious anti-inflammatory topical application.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.555-560
• /
• 2023

Conventional aqueous amine-based CO₂ capture has a problem in that a large amount of renewable energy is required for CO₂ stripping and solvent regeneration in its industrial applications. This work proposes a water-lean absorbent that can reduce regeneration energy by lowering the water content in the absorbent with high absorption capacity for CO₂. To this purpose, this water-lean solvent introduced NMP (N-methyl-2-pyrrolidone), which has a higher physical solubility in CO₂ and a low specific heat capacity comparing to water, along with 3-methylaminopropylamine (MAPA), a diamine, into the absorbent. The circulating absorption capacity and absorption rate for CO₂ of this water-lean solvent were measured using a packed tower. When NMP was added to the absorbent, the absorption rate was improved. In the case of the absorbent containing 2.5M MAPA was used, the maximum circulating absorption capacity was obtained when 10 wt% of NMP was included in absorbent. The overall mass transfer coefficient increased as the concentration of NMP increased. However, at loading values higher than 0.5, the increment in mass transfer coefficient decreased as the concentration of NMP increased. When the lean loading value is low, the mass transfer resistance due to viscosity of the absorbent is low, so the overall mass transfer coefficient increases with the addition of NMP. However, as the lean loading value increases, the viscosity of the absorbent increases, and the diffusivity of CO₂ and MAPA decreases, resulting in sharply decreasing of the overall mass transfer coefficient.

• Clean Technology
• /
• v.24 no.1
• /
• pp.50-54
• /
• 2018

In this work, N-methyl-2-pyrrolidone (NMP) was added into diethylenetriamine (DETA) aqueous solution for high $CO_2$ loading via phase splitting of absorbents during $CO_2$ absorption. Immiscible two phases were formed in the range of more than 30 wt% of NMP in 2 M DETA + NMP + water absorbents because of low solubility of DETA-carbamate in NMP solution. As the composition of NMP in the absorbents increased, the difference of $CO_2$ loading between each phase increased and the volume of bottom phase decreased. In $CO_2$ absorption in packed column by 2 M DETA + NMP + water absorbents, the absorption rate decreased in the range of more than 40 wt% of NMP. It is due to the increasing of mass transfer resistance in liquid film of absorbents at the high concentration of NMP. DETA + NMP + water absorbent is expected as the promising one for reducing the regeneration energy of absorbents according to volume reduction of $CO_2-rich$ phase.

• Elastomers and Composites
• /
• v.58 no.1
• /
• pp.26-31
• /
• 2023

Aromatic diamine containing ortho catenation and methyl group was synthesized from 4-methyl catechol and 4-nitrobenzoyl chloride. Subsequently, a poly(amic acid) was prepared by reacting 4-methyl-1,2-phenylene bis(4-aminobenzoate) with 4,4'-hexafluoroisopropylidenediphthalic anhydride (6FDA). The resulting poly(amic acid) was transformed into a polyimide through chemical imidization. The polyimide formed was soluble in N-methyl-2-pyrrolidone (NMP) and could be cast into a flexible, transparent film. Furthermore, the polyimide exhibited a 5% weight loss at 380 ℃ in the nitrogen atmosphere.

• Membrane Journal
• /
• v.9 no.3
• /
• pp.170-177
• /
• 1999

Asymmetric membranes for pervaporation were prepared with poly sulfone and sulfonated poly sulfone in order to separate water from 90% by weight butanol solution. Chlorosulfonic acid was reacted with trimethylchlorosilane for using as a sulfonating agent. The prepared polymers were characterized with FT-IR and $^1H$-NMR. The thermal properties of the polymers were examined with DSC and TGA. Back titration method was used for the evaluation of the degree of sulfonation or the ion ex¬change capacity. N-methyl-2-pyrrolidone (NMP) and diethyleneglycol dimethyl ether (DGDE) cosolvent were used for the preparation of asymmetric membranes. The cross section and skin layer of the mem¬branes were examined with scanning electron michroscopy to investigate membrane structure formed with cosolvent composition in the casting solution. In this article, the selectivity of the dense films were not different from each other so much. However, the permeation rates were significantly increased as much as 80 times compared to that of dense film.

• Macromolecular Research
• /
• v.9 no.5
• /
• pp.285-291
• /
• 2001

The polysulfone(PSf)/polyethersulfone(PES) blend membranes were prepared by an immersion precipitation method. N-methyl-2-pyrrolidone(NMP) was used as a solvent and water as a nonsolvent. The composition of the coagulation bath and the dope polymer concentration as well as the blend ratio of two polymers were varied. The membrane morphologies were interpreted on the basis of the phase diagram of the PSf/PES/NMP/water system. As the solvent content in the coagulation bath increased in the single polymer system, the number of macrovoids decreased and the morphology was changed from finger-like to cellular structure. In the given bath condition phase separation occurs earlier for the solutions of PSf/PES blend than for those of single polymer. A horizontally layered structure and horizontal protuberances inside the macrovoid were observed for the membranes formed from PSf/PES blend solutions. This peculiar structure formation can be interpreted by a PSf-rich/PES-rich phase separation followed by a polymer-rich/polymer-lean phase separation during the exchange of solvent and nonsolvent.