• 한국농림기상학회지
• /
• 제1권2호
• /
• pp.103-109
• /
• 1999

This study was carried out to investigate spectral characterisistics and chlorophyll contents of Pinus koraiensis needles in Gwangju-gun, Kyunggi-do. In spectrum analysis by each age, needle showed difference on 700∼1,100 nm(NIR : near infrared ray). Light reflexibility keeps constant between 1st year needle and 3rd year needle, current year needle's value was higher than others and that was higher for 400∼500 nm and 600∼700 nm at 550 nm. Transmission to needle's age showed the highest result in current year needle. It showed in order of current, 1st, 2nd and 3rd year needle at 550 nm and 750 nm. Especially, current year needles of Pinus koraiensis showed a tendency to change transmission coefficient in NIR. The result of transmission coefficient measurement by each position of slope showed in order of middle slope, upper slope and lower slope. But the gathered needle in middle slope made marked change at NIR. Chlorophyll a content of the upper slope's needles was higher than other 4 positions but a component ratio was lower. In needle of the oppressed tree, Chlorophyll a content was rather low than others. Chlorophyll a content by slope positions, the upper slope's needle showed a highest value(4.48 mg/g) and lower slope was lowest value(1.35 mg/g). Chlorophyll b content also showed a similar tendency to chlorophyll a and chlorophyll(a+b) contents.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2529-2532
• /
• 2003

The quality of agricultural products is represented a degree of freshness and a special qualify that has a close relation to commercial value. To grade tomatoes, it used to nondestructive equipment of a charge-coupled device(CCD) camera and near-infrared(NIR) spectrum analysis method. The NIR spectrum analysis method is used to determine internal qualities such as a brix and an acidity. The CCD camera is used to measure external qualities like color and a size of tomatoes. This paper explaines the structure and movement of the automatic grade system and applies the algorithm for deformed tomtatoes and characteristics of tomatoes through image processing to the grade system.

• 접착 및 계면
• /
• 제25권2호
• /
• pp.56-62
• /
• 2024

본 연구에서는 서로 다른 환원제를 사용하여 라이다 센서에 인식 가능한 검은색 중 공구조 물질을 합성하고 라이다 인식률을 비교하였다. 먼저, 실리카/티타니아 코어/쉘(WST) 물질을 졸-겔법을 통해 제조한 후 아스코르브산(AA)과 수소화붕소나트륨(SB)을 사용하여 환원하였다. 이후, 실리카 코어를 제거하여 두 가지의 다른 검은색 중공구조(AA-BHT 및 SB-BHT) 물질을 제조하였다. AA-BHT의 명도(L^*)와 NIR 반사율(R%)은 각각 약 19.1과 34.5 R%로 측정되었고, SB-BHT는 약 11.5와 31.8 R%로 검출되었다. AA-BHT는 SB-BHT에 비해 NIR 반사율이 높았으나 색상은 명도가 높은 검은색으로 나타났다. AA-BHT와 SB-BHT는 중공구조로 제조되어 코어/쉘 물질 대비 높은 근적외선 반사율을 나타냈으며, 이는 공기와 검은색 티타니아의 계면 사이에서 발생하는 프레넬의 반사 원리에 기인하였다. 본 연구 결과를 통해 두 물질 모두 다양한 환원법을 통해 성공적으로 검은색으로 제조되었으며, 상용화된 라이다 센서에 효과적으로 인지되어 미래의 자율주행차량용 검은색 물질로의 적합성을 나타내었다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1061-1061
• /
• 2001

The scope of precision agriculture is to reach the put up cultivation goals by adjusting inputs as precise as possible after what is required by the soil and crop potentials, on a high spatial resolution. Consequently, precision agriculture is also often called site specific agriculture. Regulation of field inputs “on the run” has been made possible by the GPS (Geographical Position System)-technology, which gives the farmer his exact real time positioning in the field. The general goal with precision agriculture is to apply inputs where they best fill their purpose. Thus, resources could be saved, and nutrient losses as well as the impact on the environment could be minimized without lowering total yields or putting product quality at risk. As already indicated the technology exists to regulate the input based on beforehand decisions. However, the real challenge is to provide a reliable basis for decision-making. To support high spatial resolution, extensive sampling and analysis is required for many soil and plant characteristics. The potential of the NIR-technology to provide rapid, low cost analyses with a minimum of sample preparation for a multitude of characteristics therefore constitutes a far to irresistible opportunity to be un-scrutinized. In our work we have concentrated on soil-analysis. The instrument we have used is a Bran Lubbe InfraAlyzer 500 (1300-2500 nm). Clay- and organic matter-contents are soil constituents with major implications for most properties and processes in the soil system. For these constituents we had a 3000-sample material provided. High performance models for the agricultural areas in Sweden have been constructed for clay-content, but a rather large reference material is required, probably due to the large variability of Swedish soils. By subdividing Sweden into six areas the total performance was improved. Unfortunately organic matter was not as easy to get at. Reliable models for larger areas could not be constructed. However, through keeping the mineral fraction of the soil at minimal variation good performance could be achieved locally. The influence of a highly variable mineral fraction is probably one of the reasons for the contradictory results found in the literature regarding organic matter content. Tentative studies have also been performed to elucidate the potential performance in contexts with direct operational implications: lime requirement and prediction of plant uptake of soil nitrogen. In both cases there is no definite reference method, but there are numerous indirect, or indicator, methods suggested. In our study, field experiments where used as references and NIR was compared with methods normally used in Sweden. The NIR-models performed equally or slightly better as the standard methods in both situations. However, whether this is good enough is open for evaluation.

• 대한원격탐사학회지
• /
• 제37권4호
• /
• pp.699-717
• /
• 2021

South Korea is pushing for the advancement of crop production technology to achieve food self-sufficiency and meet the demand for safe food. A medium-sized satellite for agriculture is being launched in 2023 with the aim of collecting and providing information on agriculture, not only in Korea but also in neighboring countries. The satellite is to be equipped with various sensors, though reference data for ground information are lacking. Hyperspectral remote sensing combined with 1st derivative is an efficient tool for the identification of agricultural crops. In our study, we develop a system for hyperspectral analysis of the ground-based reflectance spectrum, which is monitored seven times during the cultivation period of three soybean crops using a PSR-2500 hyperspectral sensor. In the reflection spectrum of soybean canopy, wavelength variations correspond with stages of soybean growths. The spectral reflection characteristics of soybeans can be divided according to growth into the vegetative (V)stage and the reproductive (R)stage. As a result of the first derivative analysis of the spectral reflection characteristics, it is possible to identify the characteristics of each wavelength band. Using our developed monitoring system, we observed that the near-infrared (NIR) variation was largest during the vegetative (V1-V3) stage, followed by a similar variation pattern in the order of red-edge and visible. In the reproductive stage (R1-R8), the effect of the shape and color of the soybean leaf was reflected, and the pattern is different from that in the vegetative (V) stage. At the R1 to R6 stages, the variation in NIR was the largest, and red-edge and green showed similar variation patterns, but red showed little change. In particular, the reflectance characteristics of the R1 stage provides information that could help us distinguish between the three varieties of soybean that were studied. In the R7-R8 stage, close to the harvest period, the red-edge and NIR variation patterns and the visible variation patterns changed. These results are interpreted as a result of the large effects of pigments such as chlorophyll for each of the three soybean varieties, as well as from the formation and color of the leaf and stem. The results obtained in this study provide useful information that helps us to determine the wavelength width and range of the optimal band for monitoring and acquiring vegetation information on crops using satellites and unmanned aerial vehicles (UAVs)

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1125-1125
• /
• 2001

Micro-scale test methods are producing small-sample size where the conventional physical and chemical tests can not be used (high standard deviation, uncertain sampling conditions, low repeatability). Different small-scale test methods were developed recently for determination of physico-chemical, functional, rheological properties of wheat or wheat dough using miniaturized instruments with sophisticated sample preparation/handling and mechanics (RVA, 2 g mixograph, micro-Z-arm mixer, small-scale noodle maker, micro-baking method etc.). The small-scale methodologies can be used as basic research tools or as technology supported measurements and can be also essential in the early selection for quality traits in breeding programs. The milling as a sample preparation step is essential procedure providing good quality flour or semolina samples from small amount of grain (5-10 g) in a reproducible and reliable way. The aim of present study was to use NIR as quality control tool, and to evaluate the recently developed and manufactured micro-scale lab mill (FQC-2000) produced by Inter-Labor Co. Ltd., Hungary. The milling characteristics of the new instrument were compared to other laboratory mills and the effects of milling action on the chemical composition of fractions were analysed. The fractions were tested with both chemical and near infrared spectroscopic methods. The micro-scale milling resulted significantly different yields, particle size distributions and different fractions from compositional point of view. The near infrared spectra were sensitive enough to distinguish the fractions obtained by different milling procedures. Quantitative NIR calibration equations were developed and tested in order to measure the chemical composition of characteristic milling fractions. Special qualification procedure the PQS (Polar Qualification System) method was used for detecting the differences between fractions obtained by macro and micro-milling procedures. The results and the limitations of PQS method in this application will be discussed.

• 대한원격탐사학회지
• /
• 제30권4호
• /
• pp.481-491
• /
• 2014

빙상이나 빙하, 빙붕에서 푸른색의 얼음이 지표에 노출되어 있는 지역을 청빙지대라 한다. 이는 빙하 표면에 쌓인 눈이 바람에 의해 침식되거나 기온과 일사량에 따른 승화로 인해 대부분 제거되기 때문이다. 청빙지대는 운석이 농집되기 쉽고 빙체의 질량균형에 매우 큰 영향을 미치기 때문에, 청빙의 노출도 및 밀집도에 대한 정량적 지표의 개발이 요구되고 있다. 이 연구에서는 2007~2012년에 동남극 맥머도 드라이벨리를 촬영한 MODIS 영상을 이용하여 청빙과 눈, 구름의 분광반사특성을 분석하고, 청빙의 노출도 및 밀집도를 정량화 할 수 있는 정규청빙지수(Normalized Difference Blue-ice Index, NDBI) 알고리즘을 고안하였다. 눈과 구름은 가시광선과 근적외선 파장대역에서 매우 높은 반사율을 나타낸다. 청빙은 청색 파장대역에서 높은 반사율을 보이는 반면에, 근적외선 파장대역에서 낮은 반사율을 보인다. NDBI 알고리즘은 청색과 근적외선 파장대역에서의 반사율 차이를 두 반사율의 합으로 나누는 것으로 표현된다[NDBI = (Blue - NIR)/(Blue + NIR)]. 청빙의 NDBI는 노출도와 밀집도에 따라 0.2~0.5의 값을 가지며, 0.2 이하의 값을 가지는 눈과 구름이나 음수의 값을 나타내는 암석으로부터 명확히 구분되었다. 청빙의 NDBI가 시간에 따라 변화하는 현상은 맥머도 드라이벨리의 기상관측소에서 측정된 풍속($R^2=0.012$)이나 기온($R^2=0.278$) 보다는 적설두께와 가장 높은 상관성($R^2=0.699$)을 나타냈다. 적설두께가 증가할수록 NDBI 값은 감소하였는데, 이는 청빙지대의 NDBI 값으로부터 적설량의 추정이 가능함을 의미한다. 이 연구에서 개발된 NDBI 알고리즘은 운석탐사, 빙체의 질량균형 분석, 적설량 추정 등 다양한 극지연구 분야에서 매우 유용하게 사용될 것으로 전망된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.420.2-420.2
• /
• 2016

Various fields have been paid attention to upconversion nanoparticles (UCNPs) because of its unique optical properties. Moreover, to use the UC luminescent techniques through cell images for identified apoptosis/necrosis of cancer cells have been performed. They have been studied for a versatile biomedical application such as a biosensing tool, or delivery of active forms of medicines inside living cells. UCNPs have distinctive characteristics such as photoluminescence, special emission, low background fluorescence signal and good colloidal stability, which have many advantages compared with the organic dyes and quantum dots. UCNPs have not only a great potential for imaging (UC luminescence) but also therapies (photo-thermal therapy, PTT and photo-dynamic therapy, PDT) in cancer diagnostics. Therefore, we report the enhancement of upconversion red emission in NaYF4:Yb3+,Er3+ nanoparticles, synthesized via solid-state method with the thermal decomposition of trifluoroacetate as precursors and organic solvent at a high boiling point. The UCNPs have an emission in the field of near infrared wavelength, cubic shape and nano-size in length. In this study, we will further investigate it for cancer therapy with NIR optical detection onto the solid substrate.

• 천문학회보
• /
• 제44권2호
• /
• pp.48.1-48.1
• /
• 2019

We found a diffuse Hα feature with a large size of ~2' around a Herbig star, MWC 1080. It shows a strong correlation with the elongated outflow cavity centered on the star. To investigate the diffuse Hα source and the molecular cavity in detail, we carried out the high-resolution NIR spectroscopy using IGRINS. We detected six hydrogen Brackett line series, seven H2 lines, and an [Fe II] forbidden line. With the obtained spatial, kinematic, and line ratio results, we discuss the characteristics of the central MWC 1080A, the NE outflow cavity, and the SE molecular cloud regions separately. Most of the bright Brγ sources around MWC 1080A were found to be reflection nebulae, but a point-like Brγ source close to another young star, MWC 1080E, was identified as a distinct source due to MWC 1080E itself. The narrow components of the H2 lines observed around MWC 1080A were found to trace PDRs located on the wall of the main outflow cavity. Based on the shock-excited H2 and [Fe II] lines detected just inside a bow-shock shape Hα feature, we suggest that it represents the actual shock at the head of the NE outflow from MWC 1080A. Also, we newly detected the shock-excited H2 and [Fe II] lines with highly blueshifted velocities in the SE molecular cloud region. They could be related to unrevealed outflows from other young stars existing around MWC 1080A.

• 한국인터넷방송통신학회논문지
• /
• 제22권2호
• /
• pp.129-134
• /
• 2022

버섯형 이중 격자 구조의 공진 바이오센서가 TE 편광 하의 근적외선 (NIR) 파장 범위에서 동작하도록 설계되었다. 정확한 MTLT (modal transmission-line theory)를 적용하여 광학적 특성을 결정하고, 격자 구조의 기하학적 매개변수를 변경하여 격자 구조의 반사 공진을 분석하였다. 수치 해석적 분석 결과, 단일층 격자 구조에서는 발생하지 않는 여기된 날카로운 Fano 공명 (FR)이 발생하였다. 설계된 구조에서 FR의 발생을 입증하기 위하여 이중 격자의 구조 매개변수와 반사 스펙트럼 사이의 관계를 자세하게 조사하였다. 제안된 구조를 기반으로 잠재적 감도가 112.9~214.3 deg/RIU, 그리고 447 nm/RIU인 광 바이오센서가 설계되었다. 제안된 버섯형 구조는 광범위한 응용 분야를 가진 광바이오센서 설계에 대한 좋은 표본으로 이용할 수 있다.