• Tuberculosis and Respiratory Diseases
• /
• v.38 no.4
• /
• pp.347-356
• /
• 1991

Endobronchial tuberculosis is a serious disase because it frequently leaves airway obstruction as the complication, and the treatment of airway obstruction is generally troublesome. In the tumorous type of endobonchial tuberculosis, the bronchial patency is partially or completely compromised with lymph node contents when the necrotic focus of the lymph node ruptures into the bronchial lumen to form a bronchoglandular fistula. To investigate the transition of endobronchial lesion and to evaluate the therapeutic role of bronchoscopic electrocautery in the tumorous type of endobronchial tuberculosis, we performed electrocautery in addition to the combination chemotherapy with steroid and anti-tuberculous drugs in two cases which had airway obstruction proximal to lobar bronchus with the impairment of pulmonary function. We also treated another two cases only with chemotherapy and we have followed up four cases over a 36-month period. In cases that bronchoscopic electrocautery was done, the bronchial patency was completely restored and the impairment of pulmonary function disappeared just after cautery and these effects have remained for 12 months or more. But in cases of medical treatment only, bronchial stenosis was inevitable as the tumorous type of endobronchial tuberculosis changed to the stenotic type with fibrosis. It can be concluded that bronchoscopic electrocautery can nip the occurence of bronchial stenosis in the bud when it is applied in addition to combination chemotherapy with steroid and antituberculous drugs in the tumorous type of endobronchial tuberculosis.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.113-116
• /
• 2005

In this paper, silicon thin-film solar cells(Si- TFSC) and a-Si/c-Si heterojunction solar cells(HJ-cell) are investigated. The Si-TFSC was prepared on glass substrate by depositing $1-3{\mu}m$ thin-film silicons by glow discharge method. The $a-Si:H/{\mu}c-Si:H$ tandem solar cells on textured ZnO:A1 TCO (transparent conducting oxide) showed improved Jsc in top and bottom cells than that on $SnO_2:F$ TCO. This enhancement of jsc resulted from improved light trapping effect by front textured ZnO:A1. The a-Si/c-Si HJ-cells with simple structure without high efficiency features are suffering from low Voc and Jsc. The improvement of front nip and back interface properties by adopting high quality silicon-films at low temperature should be done both for increasing device performances and production cost.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.94-94
• /
• 2011

스포츠웨어 바람막이용도에 사용되는 대부분의 소재는 폴리아미드계 소재이며, 국내에서는 대부분 나일론6 소재를 사용하고 있다. 최근 소비자들의 요구는 점점 경량화되고 있고 야외활동 증가와 더불어 착용감이 우수한 소재를 요구하고 있다. 이러한 시즘에 국내에서 많이 사용되는 나일론6 소재를 이용하여 직물단계에서 경량감과 스트레치성이 발현될수 있는 나일론6 세섬 권축사 개발에 대한 연구를 진행하고자 함이다. 본 연구에서는 직물단계에서 경량감과 스트레치성이 발현될수 있는 나일론6 세섬 권축사 개발을 위해 공중합 나일론6 폴리머와 일반 나일론6 폴리머를 복합방사설비를 이용하여 SIDE BY SIDE POY 26d/6f 원사를 제조하였다. 원사물성은 섬도 25.8d, 절단신도 71%, 절단강도 4.3g/d의 물성을 가졌으며, Nip Belt 가연설비로 연신비, 가연 1st 히터온도, 벨트각도 조건에 따라서 제조된 나일론6 가연사 DTY 20d/6f의 물성을 평가하였고, 비교사로서 T사에서 생산되고 있는 나일론6 가연사 DTY 20d/6f와 비교평가하였다. 비수탄성율은 가연 연신비가 높고, 1st 히터온도가 높은 조건에서 높게 나타남을 알 수 있었으며, 염색 가공 공정에서의 전처리단계에서 $100^{\circ}C$정도의 열을 받았을 때의 수축에 따른 권축효과 발현에 따른 신축성 변화에 대한 상대평가를 사단계에서 유추할 수 있다. 권축효과가 높게 나타난다 하더라도, 사의 수축힘이 적으면 권축효과 발현특성에 큰 차이가 없으므로 열응력을 측정을 한 결과, 가연 연신비가 높고 가연 1st 히터온도가 높은 조건에서 열응력이 높게 나타남을 알 수 있었으며, 비교사에 비해 약간 높은 열응력 값을 보였다. 절단강도는 가연조건에 따라서 큰 변화가 없었고, 절단신도는 연신비가 증가함에 따라 점차 감소하였으며 비교사와도 큰 차이를 보이지 않았음. 따라서, POY 26d/6f 원사에 적합하고, 권축효과가 우수한 가연조건을 도출하였고, 가연현장 작업시 문제가 없는 가연 최적조건을 도출하였다. 향후, 가연조건에 따른 제조된 가연사를 이용하여 제직 및 염색가공 공정을 거친후, 직물신축성 평가를 실시할 계획이다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.93-93
• /
• 2012

섬유산업은 그 제조 스트림이 높은 오염 부하와 에너지 다소비를 특징으로 하여 환경규제에 따라 기존 시장의 위축 가능성이 상존하고 있다. 특히 섬유산업의 주요 스트림 중의 하나인 염색가공 공정은 섬유에서 불순물을 제거하고 심미한 색상과 사용 목적에 적합한 성능을 부여하는 단계로 섬유제조 공정에서 가장 높은 부가가치를 부여하는 단계이나 고온의 물과 다양한 화공약품을 많이 사용하고 그 처리온도가 비교적 높아($100^{\circ}C$ 이상) 대표적인 폐수 발생 공정이자 에너지 다소비 공정이다. 섬유의 염색 방법 중 반연속방법인 CPB(Cold Pad Batch)염색은 반응성 염료와 알칼리의 혼합액으로 구성된 염액에 원단을 패딩한 후 상온에서 수 시간 배칭하고 수세 및 후처리하여 염색하는 방법으로 작업공정관리, 설비관리가 간편하고 에너지소비량 절감, 높은 생산성의 장점이 있다. CPB염색법은 주로 직물에 적용되어 보편화 되었으며, 작업공정 중 장력의 영향을 많이 받는 니트 소재에 적용되는 사례는 드물다. 직물류의 CPB 염색가공법은 대구 경북을 중심으로 연구진행이 활발히 이루어지고 있어 국내 100대 정도의 CPB 관련 장비가 직물제품에 한정되어 가동되고 있는 반면, 니트 CPB 관련 염색 가공 업체는 1곳에 불과한 실정이나 니트류에 대한 지속적인 수요 증가를 고려하면 니트 소재에 대한 CPB염색 적용은 시의적절한 필수요소라고 판단된다. 니트 소재에 대한 CPB염색가공 적용 시 나타나는 문제점은 작업원단의 변부 말림현상 발생, 전폭 상태에서의 색상차이인 listing현상, 원단의 첫도입부분과 끝부분의 색상차이인 tailing현상이며, 반복되는 작업 시 염색재현성을 확보하는 것으로 나타난다. 본 연구에서는 CPB염색 시 CPB Head 장치의 Padding 방식 즉, trough와 Nip type에 따른 염색 시 알칼리와 염료 투입에 따른 염색 재현성(Build up, Ending, 알칼리 안정성)을 비교해 보았으며, 이에 따른 염색제품의 물성 및 견뢰도를 확인하여 보다 효율적인 방식을 선별하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1255-1260
• /
• 2012

The densification behavior of titanium powder in the direct powder rolling process was investigated. An analytical model for the roll-backlash phenomenon during this process was proposed to conduct a realistic finite element analysis. Furthermore, the roll-backlash was quantitatively analyzed, and the relative densities of the greenstrip along the rolling direction were precisely estimated. Finally, the slip and nip phenomena were identified by calculating the contact pressure and shear stress between the titanium powder and the roller in order to understand the densification behavior of the powder during the rolling process.

• Journal of the Korean Chemical Society
• /
• v.47 no.3
• /
• pp.257-264
• /
• 2003

This study has investigated the temperature-sensitive liposomes, which release anticancer drug(doxorubicin) at the hyperthermia temperature$(~40^{\circ}C)$. The temperature-sensitive liposomes were modified with a copolymers of N-isopropylacrylamide(NIPAAm) and acrylamide(AAm), which exhibit a lower critical solution temperature (LCST) at the hyperthermia temperature. The release of doxorubicin from the modified liposomes was determined by measuring the fluorescence intensity with changing temperature and time. The release of doxorubicin from liposomes modified with poly(NIPAAm-co-AAm) copolymer was increased significantly, because poly(NIPAAm-co-AAm) could undergo the conformational transition in the narrow hyperthermia temperature region$(~40{\pm}2^{\circ}C)$. Moreover, we observed that doxorubicin released from liposomes within 5 minutes, and the size of modified liposomes was 120~170 nm. In this study, we have prepared temperature-sensitive liposomes which could be controlled by temperature. They can be applied in the field of a drug delivery system for tumor targeting by temperature control.

• Journal of Korea Foundry Society
• /
• v.12 no.3
• /
• pp.210-219
• /
• 1992

The measurement of the apparent and tap density for Al-Pb-X(Sn,Sn-Si) powders produced by centrifugal atomizer showed that the larger theoretically calculated densities the larger those densities. And tap densities were not over 50% of the theoretical densities. The nip angle of Al-5wt%Pb alloy powders produced with 38000 r.p.m. of disk rotation was $3^{\circ}$ degree larger than that of Al-8.5wt%Pb-3wt%Sn(-4wt%Si, 8wt%Si) with 50000 r.p.m. The effects of roll gap and rolling speed on thickness and density of the single strips by rolling were that rolling speed increasing the thickness and density of strip decreased and roll gap increasing, the thickness of strip increased but the density decresed. The compactibility of Al-Pb-X with Al by rerolling showed that the coarse powder-strips were better than fine powder-strips. From the SEM study with EDX analysis on the sintered strips, it was found that Pb and Sn were segregated with maximum size $5{\mu}m$, and Si existed surrounding the segregation zone. After sintering the clad strips at $500^{\circ}C$, the pores, which were spherical with $5{\mu}m$ of mean diameter, partly remained around the particles of alloy powders area, while completely disappeared at clad interface. The hardness of strips of alloy powders decreased linearly with increasing sintering temperature.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1555-1558
• /
• 2002

This paper presents deposition and characterizations of microcrystalline silicon(${\mu}c$-Si:H) films prepared by hot wire chemical vapor deposition at substrate temperature below $300^{\circ}C$. The $SiH_4$ Concentration$[F(SiH_4)/F(SiH_4)+F(H_2)]$ is critical parameter for the formation of Si films with microcrystalline phase. At 6% of silane concentration, deposited intrinsic ${\mu}c$-Si:H films shows sufficiently low dark conductivity and high photo sensitivity for solar cell applications. P-type ${\mu}c$-S:H films deposited by Hot-Wire CVD also shows good electrical properties by varying the rate of $B_2H_6$ to $SiH_4$ gas. The solar cells with structure of Al/nip ${\mu}c$-Si:H/TCO/glass was fabricated with sing1e chamber Hot-Wire CVD. About 3% solar efficiency was obtained and applicability of HWCVD for thin film solar cells was proven in this research.

• The Journal of Pediatrics of Korean Medicine
• /
• v.30 no.2
• /
• pp.10-22
• /
• 2016

Objectives This study is to analyze current guidelines for health check-ups in infants and children, and to develop better guidelines based on oriental medicine. Methods We analyzed The Manual of 2015's Health Examination for Infants and Children which is a Korean Developmental Screening Test for Infants and Children (K-DST). The statistics from the test was collected from 2010 to 2014 to figure out the problems of Health Examinations for Infants and Children. 20 articles from 2000 to 2014 from RISS, NDSL were also analyzed. Results The current guidelines for health examinations in infants and children didn't include major pediatric diseases such as allergy and asthma. Also, the pediatrics health education materials were mainly focused on hypernutrition but not so much on nutrition deficiency. The number of the centers for Health Examinations for Infants and Children was 52.2% of the number of NIP-Participating medical institutions for infants and children. Conclusions Oriental medicine can be useful to prevent major pediatric diseases and to promote general health in pediatrics. By legislating 'Geon-a-beop', which is a law for infants and children, we can increase the number of medical centers for infants and children to get health check-ups. Currently, there are 9,769 Korean medical institutions, and the rate of traditional medical doctors of public health doctors was 25.5%. Weak Children Questionnaire is developed, considered to be more useful when it is developed with 5-point scale rather than 2.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.107-108
• /
• 2006

This paper shows the design optimization of the paper feeding mechanism under dynamic behavior by using commercial codes of RecurDyn/MTT2D and RecurDyn/AutoDesign which are developed by functionBay, Inc. A virtual mockup for dynamics analysis of the paper feeding mechanism is build on RecurDyn/MTT2D and is simulated. Flexible paper is represented as a series of rigid bars connected by revolute joints and rotational spring dampers. Paper is fed by a contact and friction mechanism on rollers or guides. The slip of the paper and nip force of rollers are measured to estimate the system performance. After a simulation, these performances are automatically send to RecurDyn/AutoDesign which is a sequential approximate optimization tool based on the response surface modeling. RecurDyn/AutoDesign makes the approximate objective function and computes the optimized design points of the design variables and gives them to analysis tool. And then the simulation is repeated with the updated design variables. These processes are repeated until finding a tolerable design optimization. In this paper, a paper feeding mechanism is introduced and it is optimized with the proposed algorithms.