• 한국산업보건학회지
• /
• 제4권1호
• /
• pp.25-32
• /
• 1994

Arylmethyl halides(benzyl chloride, BZYC; benzal chloride, BZYA; benzotrichloride, BZTC) and related compounds(benzyl alcohol, BZYA; benzoyl chloride, BZOC) were determined by GC using capillary column. Detailed results are as follows. 1. Stability In methanol benzotrichloride slowly transferred to benzoyl chloride by hydrolysis(ca. 7.5% for 5 days), but the others were stable. Therefore, benzotrichloride solution should be prepared just before analysis. 2. GC analysis Tenax-GC was used to absorbent and desorption solvents were $CCl_4$ and MeOH. Arylmethyl halides were analyzed within 7.5min without interference with related compounds. The calibration curve(ca. 15-80 ppm in soln), repeatability(n=10) and the desorption efficiency were good. Limit of detection by NIOSH method was about 0.003 ppm for arylmethyl halide, respectively. To analyze arylmethyl halides and related compounds in working places GC using capillary column is anticipated to be used effectively.

• 한국환경보건학회지
• /
• 제14권2호
• /
• pp.13-27
• /
• 1988

Two asbestos slate manufacturing and seven asbestos textile plants in Korea were surveyed from May 20 to July 2, 1987. The purposes of this study were to evaluate 1) worker exposure to asbestos, 2) compliance to the standards and 3) the efficiency of existing local exhaust systems. Sixty-two personal samples and eighty-three area samples were collected and analyzed using "NIOSH 7400" method. Results of this study were as follows. 1. The asbesots exposure concentrations in asbestos textile plants were 1.3 - 14.3 fibers/cc(geometric mean(GM), 4.4 fibers/cc). 2. Worker exposure level to asbestos fiber in asbestos slate manufacturing industry was 0.21 fibers/cc during wet processing, which is below the Korean Standard of 2 fibers/cc. 3. Most local exhaust systems installed in asbestos textile plants were inadequately designed. 4. Ninety-six percent of the 145 samples exceeded the U.S. Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL) of 0.2 fibers/cc and forty-nine percent of the samples exceeded the Korean Standatd of 2 fibers/cc.

• 한국직업건강간호학회지
• /
• 제18권2호
• /
• pp.270-280
• /
• 2009

Purpose: This study was conducted to examine the relationship between job stress and work-related musculoskeletal symptoms of hospital nurses. Method: The questionnaires were administered to 290 nurses working in a general hospital located in S city from September 1 to 15, 2008. The data were analysed with descriptive statistics, and logistic regression test by SPSS WIN 14.0. Results: With the NIOSH criteria 1, the musculoskeletal symptoms were prevalent in 66.8% of the subjects. The musculoskeletal symptoms by body parts appeared mostly on leg/foot(40.6%) and followed by shoulder (38.7%), waist(30.3%), neck(23.6%), hand/wrist/finger(14.0%) and arm/elbow(4.4%). There were statistically significant differences in prevalence rate of musculoskeletal symptoms by age, work department, career and job stress. Conclusion: When developing a management program for musculoskeletal symptoms of hospital nurses, it is necessary to fully understand nurses' work considering each hospital's nursing administration system.

• Safety and Health at Work
• /
• 제10권3호
• /
• pp.389-392
• /
• 2019

When conducting an exposure assessment, the primary goal of the industrial hygienist is to fully characterize the worker's exposure during a work shift to compare it with an occupational exposure limit. This applies regardless of the duration of the work activity as an activity that is relatively short in duration can still present exposure in excess of the occupational exposure limit even when normalized over an 8-hr shift. This goal, however, is often impeded by the specification of a minimum sample volume in the published sampling method, which may prevent the sample from being collected or submitted for analysis. Removing the specification of minimum sample volume (or adjusting it from a requirement to a recommendation), in contrast, allows for a broader assessment of jobs that consist of short-duration and high-exposure activities and also eliminates the unnecessary practice of running sampling pumps in clean air to collect a specified, minimum volume.

• 한국산업보건학회지
• /
• 제23권4호
• /
• pp.341-347
• /
• 2013

Objectives: The aim of this study is to investigate the differences in airborne TDI concentrations based on the filter collection method and liquid collection method and to compare airborne TDIs concentrations by sampling method change when using the filter collection method in the spray-painting process. Methods: For the sample measurement, the filter collection method(OSHA#42) and liquid collection method(NIOSH#5522) were used; for the sampling method, the full-period single sampling and full-period consecutive sampling methods were used. The samples were collected in spray-painting and drying process locations. Results: In all samples collected from the spray-painting and drying process locations through the filter collection and liquid collection methods, greater amounts of 2,6-TDI than 2,4-TDI were detected. When the TDI collection concentrations based on the sampling methods were compared, the concentrations of 2,4-TDI and 2,6-TDI collected by the consecutive sampling method were higher than the concentrations of 2,4-TDI and 2,6-TDI collected by the single sampling method for both the filter collection method and liquid collection method used in the spray-painting process. These differences were statistically significant. Conclusions: When TDI collection concentrations based on the sample measurement methods were compared, the concentration of 2,4-TDI and 2,6-TDI collected through the liquid collection method were higher than the concentrations of 2,4-TDI and 2,6-TDI collected by the filter collection method, and the differences were statistically significant. In the drying process, no difference was shown in the collection concentrations of 2,4-TDI and 2,6-TDI with the two measurement methods.

• 디지털융복합연구
• /
• 제14권3호
• /
• pp.279-285
• /
• 2016

나노기술이 발전함에 따라 나노물질의 사용량이 증가하고, 그에 따른 환경 및 인체 유해성 문제가 사회적 이슈로 대두되고 있으나 나노물질에 대한 규제나 법규는 아직 제정되어 있지 않다. 이에 본 연구에서는 WPMN에서 지정한 제조나노물질 13종 중 국내에서 가장 많이 사용되고 있는 물질인 aluminium oxide의 거동평가를 실시하여 연구활동종사자들을 위한 안전지침의 기초 자료로 활용하고자 하였다. 실험은 실제 연구실을 1/6의 크기로 축소하여 제작한 chamber에서 진행되며, NIOSH method 0500에 준하여 질량농도를 측정하였다. 연구 결과 질량 농도는 물질의 입자 크기에 반비례하는 것으로 나타났으며, 환기 설비의 작동만으로 질량농도가 약 1/8배까지 감소하는 것을 확인 할 수 있었다. 본 연구를 향후 나노물질 관련 연구활동종사자를 위한 안전지침의 기초자료로 활용할 수 있을 것으로 보이나, 연구의 신뢰도를 높이기 위해 입경에 따른 질량농도, 수농도 측정등의 실험이 필요할 것으로 사료된다.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.69-75
• /
• 2009

It is well-known that lifting capacity of a worker is influenced by body posture during the task. When a task analyst make use of RULA and REBA Trunk and upper arm angles are recorded in a separate item. It means that the interaction between the angles of two body segments may be ignored in a final score. The NLE(NIOSH Lifting Equation) has been used to supplement this problem. However, there is no study to validate the result of RWL (Recommended Workload Limit) under the existence of interactions between trunk and upper arm angles. The goal of this study was to assess the effect of the interaction between trunk and upper arm angles. Three responses, including NMVC(normalized maximum voluntary contraction), RWL(Recommended Weight Limit) and subjective judgment in psychophysical method (Borg's scale), were recorded according to the combinations of three trunk angles and nine upper arm angles. The results showed that lifting capacity is highly influenced by interaction of two body segments(trunk and upper arm). It means that the task workload has to be analyzed along with the interaction of trunk angles and upper arm angles when the task analyst assesses potential risk factors on the postures. This study may be able to be a fundamental study to develop an assessment method for lifting task analyses according to body postures.

• Journal of the Korean Wood Science and Technology
• /
• 제29권4호
• /
• pp.33-39
• /
• 2001

포름알데히드와 요소의 몰비가 다른 2종류의 요소수지 접착제를 이용하여 접착제 첨가량과 열압시간 등 여러 조건에서 실험실 파티클보드를 열압하는 동안 배출되는 가스를 중류수에 용해 포집하고, 이렇게 얻어진 용액으로부터 포름알데히드 배출량을 미국 National Institute of Occupational Safety and Health (NIOSH) 3500의 방법에 의해 분석 비교하였다. 평가된 결과는 파티클보드를 열압하는 동안 배출되는 가스 중에서 포름알데히드량은 요소수지의 종류, 접착제 첨가량과 열압시간에 의해서 영향을 받는다는 것을 보여준다.

• 한국환경보건학회지
• /
• 제28권1호
• /
• pp.41-49
• /
• 2002

Recently, pilot studies showed an evidence of reduction of airborne hexavalent chromium, Cr(VI), on PVC filter during air sampling and storage. However, the information on this in the field was limited. Thus, we studied the reduction behaviors of airborne Cr(VI) on PVC filters during sampling and storage at three field electroplating operations. Regression between sampling time and the reduction (ratio of Cr(VI) to total Cr concentrations) was not statistically significant (p>0.05). However, the reductions in samples collected for 240 ～ 340 minutes were significantly higher than those for 30 - 60 minutes. On the other hand, another experiment showed a good correlation (r=0.96) between sampling time and the reduction without an exceptional value. Storage temperature was not a factor affecting the reduction of Cr(VI) collected on PVC filter. The loss of Cr(VI) samples stored in alkali solution (2% NaOH/3% Na$_2$CO$_3$) was significantly lower than that stored in vial according to NIOSH method (p<0.05). Thus, dipping Cr(VI) samples into alkali solution was a storage method to minimize tile reduction.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.261-269
• /
• 2005

To investigate the field applicability of a diffusive sampler (3M OVM #3500, passive sampling method) authors conducted a simultaneous measurement of personal organic solvents exposure in the air of the workplaces by charcoal tube with low volume sampler (active sampling method) and diffusive sampler. Samples were collected and analyzed by NIOSH method ($NMAM^{(R)}$) from thirty-eight workers in 12 factories who work in 6 different processes. Geometric mean (GM) and geometric standard deviation (GSD) were used to describe the result. To compare the results of the two methods, paired t-test was used. According to the manual of the exposure assessment of the mixed organic solvents (Ministry of Labor, Korea), Em was calculated. Simple linear regression was used to evaluate the relationship between the two methods. Results were as follows; 1. Eight different solvents (ethyl acetate, n-hexane, toluene, xylene, acetone, isopropyl alcohol, methyl ethyl ketone (MEK), and methyl isobutyl ketone) were detected simultaneously in the two methods and the concentrations of the personal exposure were lower than 0.5 TLV level. The concentration of the charcoal tube method was higher than that of a diffusive sampler in n-hexane and MEK (p<0.05). 2. Em of the charcoal tube method was higher than that of diffusive sampler method but not significantly different and was lower than the OEL (Occupational Exposure Limit) in all 6 processes. 3. There was a significant correlation between the two methods in low concentrations of the 8 organic solvents (p<0.05). In conclusion, there was no difference in charcoal tube method and diffusive sampler method in low concentrations of some organic solvents, diffusive sampler can be applied to assess the personal monitoring in low level exposure.