• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.787-796
• /
• 2003

Two experiments were conducted to investigate the effect of germanium biotite (GB) on growth performance, nutrient digestibility and fecal gas emission in pigs. In Exp 1., a total of one hundred nursery pigs (initial body weight 13.12${\pm}$0.15kg) were used in a 21 d growth assay. The five treatments were control (CON, basal diet), GB0.5-200 (basal diet + 0.5% GB, 200mesh), GB1.0-200 (basal diet + 1.0% GB, 200mesh), GB0.5-325 (basal diet + 0.5% GB, 325mesh), GB1.0-325 (basal diet + 1.0% GB, 325mesh). Each treatment had four replicates with five pigs per replicate. ADG, ADFI and gain/feed were not significantly different among the treatments. Fecal NH3-N concentration of pigs fed the GB325 diet was lower than that of pigs fed the GB200 diet (P=0.01). The GB treatments reduced fecal volatile fatty acids significantly compared to the CON (propionic acid, P=0.01; butyric acid, P=0.01; acetic acid, P=0.02). Especially, fecal propionic acid concentration of pigs fed the GB325 diets was lower than that of pigs fed the GB200 diets (P=0.02). In Exp 2., a total of seventy five pigs (initial body weight 21.18${\pm}$0.15kg) were used in a 28 d growth assay. The treatments were same as described for Exp. 1. Each treatment had five replicates with three pigs per replicate. The GB1.0 treatments significantly increased the ADG compared to the GB0.5 treatments (P=0.03). The DM and N digestibility of pigs fed the GB1.0 diets were higher than that for pigs fed the GB0.5 diets (P=0.01). Also, the Ca digestibility of pigs fed the GB diets was higher than that for pigs fed the CON diets (P=0.01). The fecal NH3-N concentrations for the GB treatments were lower than that for the CON (P=0.01). The GB325 treatments significantly decreased the fecal NH3-N concentration compared to the GB200 treatments (P=0.03). The fecal butyric acid concentration for the GB325 treatments was lower than that for the GB200 treatment (P=0.04). In conclusion, the results obtained from these feeding trials suggest that the dietary GB for nursery pigs affects fecal noxious gas emission. In growing pigs, dietary GB was effective to improve ADG and decrease fecal noxious gas emission.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.801-811
• /
• 2020

The main objective of this in vitro study was to evaluate red ginseng byproduct (RGP) as a protein resource and its effects on rumen fermentation characteristics, microflora, CO2, and CH4 production in ruminants. Four treatments for in vitro fermentation using buffered rumen fluid over a 48 h incubation period were used: 1, RGP; 2, corn gluten feed (CGF); 3, wheat gluten (WG); and 4, corn germ meal. In vitro dry matter digestibility (IVDMD), in vitro neutral detergent fiber digestibility (IVNDFD), in vitro crude protein digestibility (IVCPD), volatile fatty acids, pH, and ammonia nitrogen (NH3-N) were estimated after 48 h incubation. Gas production was investigated after 3, 6, 12, 24, 36 and 48 h. The CO2 and CH4 were evaluated after 12, 24, 36, and 48 h. A significant difference in total gas production and CO2 emissions was observed (p < 0.01) at all incubation times. CH4 production in RGP were higher (p < 0.05) than that in other treatments but a higher CH4 portion in the total gas production was observed in WG (p < 0.05) at 48 h incubation. The IVDMD, IVNDFD, and IVCPD of RGP was lower than those of other conventional ingredients (p < 0.01). The RGP had the lowest NH3-N value among the treatments (p < 0.01). The RGP also had the lowest total VFA concentration (p < 0.01), but presented the highest acetate proportion and acetate to propionate ratio among the treatments (both, p < 0.01). The abundance of Prevotella ruminicola was higher in RGP than in WG (p < 0.01), whereas RGP has lower methanogenic archaea (p < 0.01). In conclusion, based on the nutritive value, IVDMD, low NH3-N, and decreased methanogenic archaea, RGP inclusion as a protein source in ruminant diets can be an option in replacing conventional feed sources.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.21-31
• /
• 2000

Performance characteristics of a wet air cleaning system were investigated experimentally, and discussed in relation with physicochemical properties of the target pollutants. The system is composed of an air cleaner, a separator, and a medium filter. Removal efficiency of the system was measured for ambient particles and gaseous air pollutants: $SO_2$, NO, $NO_2$, HCHO, and $NH_3$. For particle removal test, particles were introduced into the system through a fan, and the particle size distribution was measured at three locations by using two laser particle counters. Particle removal efficiency for each system component was obtained from the particle size distribution. It was found that the separator primarily removed coarse particles greater than $5{\mu}m$ in diameter, and that the medium filter mainly removed fine particles less than $5{\mu}m$ in diameter. For gas removal test, air with gaseous air pollutant was injected into the outlet of the fan, and the concentration was measured both at the upstream of the air cleaner and at the downstream of the separator. It was found that the gaseous species with high Henry's law coefficients, such as $SO_2$, HCHO, and $NH_3$, showed high removal efficiency, but the gaseous species with low Henry's law coefficients, such as NO and $NO_2$, showed low removal efficiencies. It was also found that negative ions were generated from the air cleaner.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.609-617
• /
• 2000

This study is aimed at investigating an effect of HCl gas on selective reduction of NOx over a CuHM and $V_2O_5-WO_3/TiO_2$ catalyst. SCR process is the most effective method to remove NOx, but catalyst can be deactivated by the acidic gas such as HCl gas which is also included in flue gas from the incinerator. In dry condition of flue gas, the CuHM catalyst treated by HCl gas has shown higher NO removal activity than the fresh catalyst. The activity of the catalyst can be restored by treating at $500^{\circ}C$. On the contrary. $V_2O_5-WO_3/TiO_2$ catalyst is obviously deactivated by HCl and the deactivation increases in proportion to the concentration of HCl gas. The deactivated catalyst is not restored to it's original activity by heat treatment for regeneration. In wet flue gas stream, the CuHM catalyst has shown lower activity than fresh catalyst and $V_2O_5-WO_3/TiO_2$ catalyst was severely deactivated by HCl treatment. The activity loss of catalysts are mainly due to the decrease of Br$\ddot{o}$nsted acid site on the catalyst surface by $NH_3$ TPD. The change of BET surface area of CuHM catalyst after the reaction isn't observed but $V_2O_5-WO_3/TiO_2$ catalyst is observed. The amount of $Cu^{{+}{+}}$ and $V_2O_5$ is decreased after the reaction. From these results, it is expected that CuHM catalyst should be better than $V_2O_5-WO_3/TiO_2$ catalyst for its application to the incineration of flue gas.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.157-161
• /
• 2006

InGaN layers on GaN templated sapphire (0001) substrates were grown by mixed-source hydride vapor phase epitaxy (HVPE) method. In order to get InGaN layers, Ga-mixed In metal and $NH_3$ gas were used as group III and group V source materials, respectively. The InGaN material was compounded from chemical reaction between $NH_3$ and indium-gallium chloride farmed by HCl flowed over metallic In mixed with Ga. The grown layers were confirmed to be InGaN ternary crystal alloys by X-ray photoelectron spectroscopy (XPS). In concentration of the InGaN layers grown by selective area growth (SAG) method was investigated by the photoluminescence (PL) and cathodoluminescence (CL) measurements. Indium concentration was estimated to be in the range 3 %. Moreover, as a new attempt in obtaining InAlGaN layers, the growth of the thick InAlGaN layers was performed by putting small amount of Ga and Al into the In source. We found the new results that the metallic In mixed with Ga (and Al) as a group III source material could be used in the growth process of the In(Al)GaN layers by the mixed-source HVPE method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.12
• /
• pp.1742-1747
• /
• 2012

A total of 96 growing pigs ((Landrace${\times}$Yorkshire)${\times}$Duroc; BW = $26.58{\pm}1.41$ kg) were used in a 6-wk feeding trail to evaluate the effects of fermented chlorella (FC) supplementation on growth performance, nutrient digestibility, blood characteristics, fecal microbial and fecal noxious gas content in growing pigs. Pigs were randomly allotted into 1 of 4 dietary treatments with 6 replicate pens (2 barrows and 2 gilts) per treatment. Dietary treatments were: i) negative control (NC), basal diet (without antibiotics); ii) positive control (PC), NC+0.05% tylosin; iii) (fermented chlorella 01) FC01, NC+0.1% FC, and iv) fermented chlorella 02 (FC02), NC+0.2% FC. In this study, feeding pigs PC or FC01 diets led to a higher average daily gain (ADG) and dry matter (DM) digestibility than those fed NC diet (p<0.05), whereas the inclusion of FC02 diet did not affect the ADG and DM compared with the NC group. No difference (p>0.05) was observed on the body weight, average daily feed intake (ADFI), gain:feed (G:F) ratio, the apparent total tract digestibility of N and energy throughout the experiment. The inclusion of PC or FC did not affect the blood characteristics (p>0.05). Moreover, dietary FC treatment led to a higher (p<0.05) lactobacillus concentration and lower E. coli concentration than the NC treatment, whereas the antibiotic supplementation only decreased the E. coli concentration. Pigs fed FC or PC diet had reduced (p<0.05) fecal $NH_3$ and $H_2S$ content compared with those fed NC diet. In conclusion, our results indicated that the inclusion of FC01 treatment could improve the growth performance, nutrient digestibility, fecal microbial shedding (lower E. coli and higher lactobacillus), and decrease the fecal noxious gas emission in growing pigs when compared with the group fed the basal diet. In conclusion, dietary FC could be considered as a good source of supplementation in growing pigs because of its growth promoting effect.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.207-217
• /
• 1992

In this study, isolated and cultured nitrogen fixed microbes were seeded in the three-phase fluidized bed in which gas, solid and liquid were contacted directly. Input velocity was varied from 8.12 cm/hr to 16.32 cm/hr. And upflow gas pressure was fixed to 80 psi. Return ratios were from 0.2 to 0.6 with the each experimental condition. According to these condition, movement of media, growth of biofilm and removal efficiency were measured. As the results, in case of briquette ash, biofilm was developed to $170{\mu}m$ when velocity was 8.12 cm/hr and return ratio was 0.6. In this condition, COD removal efficiency was 97% and $NH_4$-N removal efficiency was 83%. At the same condition, biofilm thickness of glass bead was $17.59{\mu}m$ and its COD and $NH_4$-N removal efficiency was 83% and 72%. Nitrogen fixed microbes have following characters: it formed dark-brownish sludge, excellent adhesive force, easy solid-liquid separation and low oxygen uptake ratio, but sensitive to DO concentration. Not only it endured shock loading, but required short time to steady state.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.7-18
• /
• 2016

This study evaluated the toxicity of the burning gas from the synthetic wood products used in housings or warehouses. The combustion products of five materials, viz. impregnated laminated board, MDF, Douglas fir plywood, core plywood, and Lauan retardant, were analyzed using SEM, FTIR and a Cone Calorimeter. For the Lauan retardant, 256,965 ppm of carbon dioxide ($CO_2$) and 1,475 ppm of sulfur dioxide ($SO_2$) were measured, which are 2.5 times and 3.6 times as high as their lethal concentrations of 100,000 ppm and 400 ppm, respectively. For the impregnated laminated board, 1,569 ppm of nitrogen dioxide ($NO_2$) was measured, which is 6 times as high as its lethal concentration of 250 ppm. For MDF, 795 ppm of ammonia ($NH_3$) was measured, which is higher than its lethal concentration of 750 ppm. As a result, most internal-finishes generated toxic combustion products at levels higher than their lethal concentrations, which underlines the importance of the selection and manufacturing of internal-finish materials.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.3
• /
• pp.354-362
• /
• 2018

Objective: Wheat is an alternative to corn silage for ruminant feeding in northern China. This study examined the effects of harvest time and added molasses on nutritional content, ensiling characteristics and in vitro degradation of whole crop wheat (WCW). Methods: Fresh WCW at the milk-ripe stage was harvested at 0700 h (i.e., in the morning [Mo]) and 1700 h (i.e., in the afternoon [Af]), and then immediately used to prepare silage and make hay. Commercial molasses was added to Af WCW at 0%, 2%, 4%, and 6% (fresh weight) proportions. The WCW treated with molasses was mixed thoroughly prior to ensiling. Results: Dry matter (DM), neutral detergent fiber, water soluble carbohydrate (WSC) content (p<0.01), accumulative gas production in 72 h ($GP_{72h}$, 77.46 mL/g vs 95.15 mL/g) and dry matter disappearance in vitro (69.15% vs 76.77%) were lower (p<0.05), while crude protein (CP) content was higher for WCW silage (WCWS) compared to WCW (p<0.01). The propionic acid and butyric acid concentrations in WCWS from Mo WCW were 1.47% and 0.26%, respectively. However, the propionic and butyric acid concentrations were negligible, while the ammonia nitrogen/total nitrogen ($NH_3-N/TN$, p<0.01) concentration was lower and the rate of gas production at 50% of the maximum (17.05 mL/h vs 13.94 mL/h, p<0.05) was higher for Af WCWS compared to Mo WCWS. The incubation fluid's $NH_3-N$ concentration was lower in WCWS and Af WCW compared to Mo WCW (p<0.05). The CP and WSC content increased with increasing molasses levels (p<0.05). Furthermore, the pH (p<0.01) and time when gas production was 50% of the maximum (2.78 h vs 3.05 h, p<0.05) were lower in silage treated with 4% molasses than silage without molasses. Conclusion: Harvesting wheat crops in the afternoon and adding molasses at 4% level to WCW optimally improved ensiling characteristics, leading to well-preserved silage.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.135-135
• /
• 2003

This paper presents the preparation of SnO$_2$ films by Sol-Gel process and using spin coating method, and their sensing properties in CO gas. Experimental procedure consisted of following steps: (1) Tin chloride(SnCl$_4$) and Ammonium hydrogen carbonate (NH$_4$HCO$_3$) were used as precursors; (2) the Sol solution with concentration of about 10wt% SnO$_2$ was prepared from washed Gel-precipitate for spin coating step; (3) thereafter, the coating solution was dropped onto the alumina (Al$_2$O$_3$) substrate that was then spun, the spin coating was carried out with total 10 times; (4) finally, the films were calcined for 3 hours at 50$0^{\circ}C$ or higher temperature (600, 700, 800 or 90$0^{\circ}C$) in order to obtain various gram sizes. The average grain size was calculated by Scherrer's equation using main peaks in XRD spectra; meanwhile the thickness, microstructure and surface morphology of the films were observed by FE-SEM.