• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.21-27
• /
• 2018

The purpose of this study is to develop a SOP (Standard Operating Procedure) for a distribution board that can monitor the leakage current of a load distribution line in real time. The developed distribution board was fabricated by applying IEC 61439-1. It consists of the distribution board and an alarm device. The work process for making the distribution board was compliant with the KEMC (Korea Electrical Manufacturers Cooperative) regulations. And the AC distribution board range is 1,000 V. In addition, the voltage in DC is less than 1500 V. The distribution board receives a 3-phases and 4-wires power supply system and can supply power to the load of a maximum of 32 single or three phase distribution circuits. Also, leakage current measured on the power distribution board was used by sensors installed. The SOP of the developed distribution board consists of the installation standards for the short circuit alarm device and sensor, the surge protection device, switches and indication lamps, and other devices. The operation procedure was prepared so that each manufacturing step of the distribution board must be confirmed by the persons in charge of preparation, production, quality control and approval before moving forward to the next step.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.21.1-21.3
• /
• 2019

Background: Treatment planning the correction of a transverse maxillary occlusal plane cant often involves a degree of qualitative "eyeballing", with the attendant possibility of error in the estimated judgement. A simple chair side technique permits quantification of the extent of asymmetry and thereby quantitative measurements for the correction of the occlusal plane cant. Methods: A measuring instrument may be constructed by soldering the edge of a stainless steel dental ruler at 90° to the flat surface of a similar ruler. With the patient either standing in natural head position, or alternatively seated upright in the dental chair, and a dental photographic retractor in situ, the flat under-surface of the horizontal part of this measuring instrument is placed on a unilateral segment of a bilateral structure, e.g. the higher maxillary canine orthodontic bracket hook. The vertical ruler is held next to the contralateral canine tooth, and the vertical distance measured directly from the canine bracket to the flat under-surface of the horizontal part of the measuring instrument. Results: This vertical distance quantifies the overall extent of movement required to level the maxillary occlusal plane. Conclusions: This measuring instrument and simple chair side technique helps to quantify the overall extent of surgical levelling required and may be a useful additional technique in our clinical diagnostic armamentarium.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.3
• /
• pp.47-56
• /
• 2016

Recently many small and mid-sized hospitals are closing down or experiencing financial difficulties. As a result, in order to provide exceptional service that would increase their competitiveness, they implemented telemedicine service for the prescription of medicine necessary before a colonoscopy. This study is an analysis of how telemedicine service affects patient satisfaction. Through the focus group interview (FGI) of medical service providers, regarding telemedicine service and face-to-face service, it was appraised that telemedicine service was more effective than face-to-face service. Afterward, a second survey aimed at endoscopy patients was conducted in order to find out the value of telemedicine service. First, through the analysis of the three main factors of telemedicine service, conclusions were drawn(safety/reliability, convenience/rapidity, and economics). A follow-up analysis showed that convenience/rapidity had the greatest effect on telemedicine service satisfaction. Next the factors of the quality of medical service were analyzed and 3 main factors were deduced (the superiority of the external and internal environments/appropriateness, superiority of the medical team, telemedicine service). A follow-up analysis found that telemedicine service had the greatest effect on patient satisfaction. This study found that providing exceptional medical service that utilizes telemedicine service would improve patient satisfaction. Therefore, we would be able to form a strategic plan that would strengthen the competitiveness of small and mid-sized hospitals.

• Journal of ILASS-Korea
• /
• v.21 no.2
• /
• pp.71-77
• /
• 2016

Air pollutants nitrogen oxides are inevitably generated in the combustion reaction. Its amount trend is steadily increasing because the rapid modern industrialization and population growth. For this reason, NOx is controlled to reducing the harmful components in the exhaust gas. So Marine Environment Protection Committee (MEPC) take effect 'Tier I', 'Tier II' of air pollution regulation in 2005 and 2011 respectively. According to NOx emissions are strictly regulated management of the vessel through them. In addition, since 2016 the regulation enter into force in the next step 'Tier III' was confirmed by MEPC 66th committee. It's 80% enhanced emissions limits than the 'Tier I' Alternatively these emission regulation, research is actively being carried out about exhaust gas after-treatment methods through the vessel application of Selective Catalytic Reduction(SCR). Therefore depending on the basic specification of cell density according to the Area velocity, Space velocity, Linear velocity is studied the effects of NOx removal efficiency

• Strategy21
• /
• s.41
• /
• pp.208-231
• /
• 2017

The balance of power in conventional forces between the two Koreas works in favor of the South Korea in the Korea peninsula. But, the balancing mechanism between the two Koreas in asymmetric forces like nuclear and missile forces works absolutely in favor of the North Korea. That's why it should be timely for the ROK military to review existing strategy and revise a new counter strategy against the threat posed by the North Korea's nuclear and missile forces. The ROK military is now developing 4D, KAMD, KILL Chain strategies as means to cope with the North Korea's nuclear and missile threats. Considering efforts and resources invested now, the strategies are expected to be in place in next five or more years. However, approaches to those strategies seem to be rather fragmentary and conceptual than comprehensive and pragmatic. The types of strategies against the North Korea's military threats need to be a deterrence in peace time and a fighting and winning in war time in the Korean theater. But, the most important element in the deterrence strategy is the credibility. This study concludes with an new strategic concept titled "ADAD(Assured Defense, Assured Destruction)" as an alternative to existing strategies to deal with the North Korea's nuclear and missile threats.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.4
• /
• pp.939-965
• /
• 2014

Farm succession in the next generation has profound implications for the future structure of the agricultural industry and the procurement of agricultural human resources. Therefore, this study sought to suggest the policy directions for farm succession through investigating the foreign policies and comparing it with Korean policies. The followings were derived from the comparison analysis. First, support is required in establishing master plans for farm succession from operators to successors. Second, it is needed to develop and disseminate effective model for farm succession. Third, an assistance policy for farm households without successors should be initiated. Fourth, the fragmentation of farmland ownership should be counteracted.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1229-1234
• /
• 2010

High quality and high speed multimedia services will be required in the next generation mobile communications. To satisfy these services, powerful error correction techniques are used. ARQ(Auto Repeat Request) techniques, aspects of the throughput, and FEC(Forward Error Correct) techniques have disadvantages in terms of reliability. H-ARQ(Hybrid Auto Repeat Request) systems have been studied extensively as a solution of these disadvantages. In this paper introduce double layer coding and H-ARQ type, proposed H-ARQ system using double layer coding methods. Simulate BER performance and throughput. And we suggest that according to channel condition suitable H-ARQ type.

• Biomedical Science Letters
• /
• v.21 no.4
• /
• pp.233-240
• /
• 2015

Some virulence proteins of Helicobacter pylori, such as vacuolating cytotoxic protein A (VacA) and cytotoxin-associated gene protein A (CagA) have been reported to be causative agents of various gastric diseases including chronic gastritis, gastric ulcer or gastric adenocarcinoma. The expression level of these virulence proteins can be regulated when H. pylori is exposed to the antibacterial agent, cyanidin 3-O-glucoside (C3G) as previously reported. In this study, we analyzed the quantitative change of various virulence proteins including CagA and VacA by C3G treatment. We used 2-dimensional electrophoresis (2-DE) to analyze the quantitative change of representative ten proteome components of H. pylori 60190 ($VacA^+/CagA^+$; standard strain of Eastern type). After 2-DE analysis, spot intensities were analyzed using ImageMaster$^{TM}$ 2-DE Platinum software then each spot was identified using matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF-MS) or peptide sequencing using Finnigan LCQ ion trap mass spectrometer (LC-MS/MS). Next, we selected major virulence proteins of H. pylori among quantitatively meaningful ten spots and confirmed the 2-DE results by Western blot analysis. These results suggest that cyanidin 3-O-glucoside can modulate a variety of H. pylori pathogenic determinants.

• Biomedical Science Letters
• /
• v.12 no.3
• /
• pp.139-143
• /
• 2006

Jopock (Jpk) has previously been ascertained that induces both bacterial and mammalian cell death. The Escherichia coli cells expressing Glutathion S-transferase (GST) fused Jpk showed elongated phenotype and inhibited cell growth which led eventual cell death. In an attempt to search the genetic suppressor of the lethal protein Jpk in bacterial cells, we constructed a unidirectional protein expression vector inserting tac promoter next to the C-terminus Jpk in pGEX-Jpk. The function of additional tac promoter was confirmed by substituting lac promoter in Plac-TOPO plasmid. The cells harboring plac- TOPO, which regulates $lacZ{\alpha}$ gene expression under lac promoter, formed blue colonies in 5-bromo-4-3 $indolyo-{\beta}-D-galactoside$ (X-gal) plate. When lac promoter was changed to tac promoter, same results were observed. Since the addition of tac promoter did not affect the toxic effect of Jpk, the pGEX-Jpk-ptac could be a useful vector for the screening of suppressor(s) for Jpk, in which GST-Jpk and a putative Jpk-suppressing protein are coexpressing from two unidirectional tac promoters, which response to the same inducer, $isopropyl-{\beta}-D-thiogalactopyranoside (IPTG)$.

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.59-67
• /
• 2012

A grid computing consists of the physical resources for processing one of the large-scale jobs. However, due to the recent trends of rapid growing data, the grid computing needs a parallel processing method to process the job. In general, each physical resource divides a requested large-scale task. And a processing time of the task varies with an efficiency and a distance of each resource. Even if some resource completes a job, the resource is standing by until every divided job is finished. When every resource finishes a processing, each resource starts a next job. Therefore, this paper proposes a dynamic resource reallocation scheduling model (DDRSM). DDRSM finds a waiting resource and reallocates an unfinished job with an efficiency and a distance of the resource. DDRSM is an efficient method for processing multiple large-scale jobs.