• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.5-8
• /
• 2009

In this paper, a high-quality low-temperature co-fired ceramic (LTCC) solenoid inductor using a solder ball and an air cavity on a silicon wafer for three-dimensional (3-D) system-in-package (SiP) is proposed. The LTCC multi-layer solenoid inductor is attached using Ag paste and solder ball on a silicon wafer with the air cavity structure. The air cavity is formed on a silicon wafer through an anisotropic wet-etching technology and is able to isolate the LTCC dielectric loss which is equivalent to a low k material effect. The electrical coupling between the metal layer and the LTCC dielectric layer is decreased by adopting the air cavity. The LTCC solenoid inductor using the solder ball and the air cavity on silicon wafer has an improved Q factor and self-resonant frequency (SRF) by reducing the LTCC dielectric resistance and parasitic capacitance. Also, 3-D device stacking technologies provide an effective path to the miniaturization of electronic systems.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.362-367
• /
• 2011

The aerodynamic performance of the pantograph of the next generation high sped train is analyzed. The calculation of the flow around pantograph is carried cut by FLUENT; by the steady state flow calculation with ${\kappa}-{\omega}$ SST turbulence model, the lift force of the pantograph is computed. For the verification of the numerical schemes am grid systems, flow calculations are performed with the pantograph shape which was used at the experiments performed at Railway Technical Research Institute (RTRI) in Japan. Then, the difference of lift force between numerical am experimental results is about 10%. Therefore, selected numerical schemes and the current grid system is adequate for the analysis am prediction of the aerodynamic performance of panthograph system. Based on these numerical schemes am grid system, the flow around pantograph of the next generation high sped train is calculated and the lift force of the pantograph is predicted; the lift force of the pantograph is about 146N.

• Journal of the Korean Society for information Management
• /
• v.31 no.2
• /
• pp.7-40
• /
• 2014

This study proposes to identify digital library services applying cutting-edge technologies, and attempt to investigate the applicability of these technologies and services to domestic libraries. To this end, we reviewed main research which discusses next generation digital libraries, and examined thoroughly main technologies which can be applied to future libraries. As a result, the core technologies, concepts, and tools of the next generation of digital library are: cloud services, space for infinite creating (makerspace), big data, augmented reality, context-aware technologies, Google-glass, a revolutionary display technology, open linked-content-offering method, and so on. Specific cases of libraries already utilizing these technologies are also discussed.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.95-104
• /
• 2002

The interworking for voice service between next generation mobile network and traditional network can be deployed better flexible and expansible network conditions with providing efficiency and economy of network at the same time. So it is essential to develop the interworking strategies together with a evolved network and traditional network. This paper describes a design and verification of internetworking protocol for CC of next generation mobile network and SIP of IP network for applying interworking technology to next generation mobile network, which can harmoniously expropraise voice service from traditional network.

• Journal of Animal Environmental Science
• /
• v.21 no.3
• /
• pp.93-98
• /
• 2015

The objective of this study was to review application of next-generation sequencing (NGS) to investigate microbiome in the livestock sector. Since the 16S rRNA gene is used as a phylogenetic marker, unculturable members of microbiome in nature or managed environments have been investigated using the NGS technique based on 16S rRNA genes. However, few NGS studies have been conducted to investigate microbiome in the livestock sector. The 16S rRNA gene sequences obtained from NGS are classified to microbial taxa against the 16S rRNA gene reference database such as RDP, Greengenes and Silva databases. The sequences also are clustered into species-level OTUs at 97% sequence similarity. Microbiome similarity among treatment groups is visualized using principal coordinates analysis, while microbiome shared among treatment groups is visualized using a venn diagram. The use of the NGS technique will contribute to elucidating roles of microbiome in the livestock sector.

• Atmosphere
• /
• v.28 no.2
• /
• pp.201-209
• /
• 2018

Benefits of the next generation geostationary meteorological satellite observation (e.g., GEO-KOMPSAT-2A) are qualitatively and comprehensively described and discussed. Main beneficial phenomena for application can be listed as tropical cyclones (typhoon), high impact weather (heavy rainfall, lightning, and hail), ocean, air pollution (particulate matter), forest fire, fog, aircraft icing, volcanic eruption, and space weather. The next generation satellites with highly enhanced spatial and temporal resolution images, expanding channels, and basic and additional products are expected to create the new valuable benefits, including the contribution to the reduction of socioeconomic losses due to weather-related disasters. In particular, the new satellite observations are readily applicable to early warning and very-short time forecast application of hazardous weather phenomena, global climate change monitoring and adaptation, improvement of numerical weather forecast skill, and technical improvement of space weather monitoring and forecast. Several policy plans for expanding the application of the next generation satellite data are suggested.

• KIEE International Transactions on Power Engineering
• /
• v.2A no.3
• /
• pp.83-88
• /
• 2002

An over current relay(OCR), one of the most frequently used protective devices, has time-current characteristics (TCC) to control its trip time according to the current level. It is because an appropriate operating time interval is necessary for coordination with other protective devices. A set of TCC curves of an OCR is, in general, given by the supplier from which a curve is selected by the operator. Therefore, in many cases, it is impossible to consider the operation condition of the given power system exactly. A novel concept of an OCR is suggested in this paper. The proposed OCR has an internal correction module so that it may produce the most adequate TCC curve according to the given protective information for coordination with other devices. With the generated TCC curve, a variety of operation and coordination conditions can be taken into consideration in an effective manner. The suggested OCR is applied to a simple test power system to show very promising results from a coordination point of view.

• Restorative Dentistry and Endodontics
• /
• v.40 no.4
• /
• pp.286-289
• /
• 2015

Objectives: The aim was to evaluate dentinal crack formation after root canal preparation with ProTaper Next system (PTN) with and without a glide path. Materials and Methods: Forty-five mesial roots of mandibular first molars were selected. Fifteen teeth were left unprepared and served as controls. The experimental groups consist of mesiobuccal and mesiolingual root canals of remaining 30 teeth, which were divided into 2 groups (n = 15): Group PG/PTN, glide path was created with ProGlider (PG) and then canals were shaped with PTN system; Group PTN, glide path was not prepared and canals were shaped with PTN system only. All roots were sectioned perpendicular to the long axis at 1, 2, 3, 4, 6, and 8 mm from the apex, and the sections were observed under a stereomicroscope. The presence/absence of cracks was recorded. Data were analyzed with chi-square tests with Yates correction. Results: There were no significant differences in crack formation between the PTN with and without glide path preparation. The incidence of cracks observed in PG/PTN and PTN groups was 17.8% and 28.9%, respectively. Conclusions: The creation of a glide path with ProGlider before ProTaper Next rotary system did not influence dentinal crack formation in root canals.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.183-189
• /
• 2008

E-mail's role has been increased due to its merit which is sending demanded information in real-time anywhere, anytime. However, Today's E-mail security threats have being changed intelligently to attack against the specific agency. The threat is a limit to respond. Therefore precise definition and development of security technology is needed to analyze changing environment and technologies of e-mail so that remove fundamental security threat. we proposed Next Generation E-mail System Security Structure and the Next Generation fusion System using authentication As a result, in this study, we development of Next Generation E-mail System Security Structure. This system can protect E-mail user from social engineering hacking technique, spam, virus, malicious code and fabrication.

• Journal of Haehwa Medicine
• /
• v.5 no.2
• /
• pp.513-522
• /
• 1997

Clinical studies were done on 94 patients with the General Pain after Childbirth(GPC). which were treated in Dept. of Oriental Gynecology. Oriental Medical Hospital. Dae Jeon University from July 1st 1995 to June 30th 1996. 1. The total incidence of GPC was about 13.2% of the 1162patients. 2. In age distribution of GPC. after twenty years old was the most in 40.4%. the next ration was thirty years old. forty years old. early twenty years old. 3. In inducing factor. overlook was the most in 29.8%. the next ration was delivery itself. difficult delivery. cesarean section in 26.6%. 4. In therapeutic response. excellence was the most in 38.3%. the next ration was improvement. good. non improvement. 5. In onset. within ten days of postpartum was the most in 35%. the next ration was from 11 to 30 days. from 91 to 180 days. during the period of pregnancy. from 61 to 90 days. from 180 to 360 days. 6. Remedical value of abortion was relatively emedical value of difficult delivery. Cesarean section was bad. 7. In delivery times. abortion times and pregnant times did not concern therapeutic response. 8. In therapeutic period. from 11 to 30 days was the most in 46.8%. 9. In delivery seasons. Feburary was the most in 15.9%. and there were many occurrence of GPC in the winter season. 10. Past history did not concern GPC. 11. In prescriptions. Bohuh Tang Kamibang(B) was the most in 33%.