• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.20-29
• /
• 2014

This research aims to study the new paradigm of NDE measurement which allows the identification of defect locations and sizes of a certain structure by measuring its surface temperature after applying heat. STS which has a certain defect is applied by the heat of 70000W by a heater. Its difference of STS surface temperature is measured by using Infrared thermography. The estimated result of STS experiment and that of theoretical analysis of Flex-PDE are compared and analyzed to diagnose STS defect. Moreover, this study can save time and money and improve accuracy in contrast to the existing ultrasonic NDE experiment. In addition, the new paradigm of NDT/NDE by reverse-engineering will be valid if the data of thermal analysis and temperature distribution from the specifications of many materials is accumulated and verified.

• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.25-36
• /
• 2004

Ultrasonic inspection system consist of the examination procedures, equipment, and operators. The reliability of nondestructive testing is influenced by the inspection environment, materials and types of defect. It is very difficult to estimate the reliability of NDT due to the various factors. Piping inspection round robin was conducted to quantify the capability of ultrasonic inspection during in-service. In this study, the models for predicting the ultrasonic NDE reliability by logistic model and linear regression model are discussed. The utility of the NDT reliability assessment is verified by the analysis of the data from round robin test with these models.

• 비파괴검사학회지
• /
• 제14권4호
• /
• pp.244-249
• /
• 1995

적외선을 이용한 비파괴검사 방법은 검사자가 검사체의 온도를 분석하여 검사체의 건전성을 평가할 수 있도록 개발된 방법이다. 이것이 최근에는 화력발전소 및 원자력발전소 등과 같은 다양한 산업에 적용되어 사용되고 있다. 따라서, 본 보고서는 적외선을 이용한 비파괴검사의 기초적인 원리, 적외선 측정 장비의 기본 원리 및 그것의 응용분야를 기술하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제27권4호
• /
• pp.43-50
• /
• 1999

The safety-evaluation of ancient wood structures has been executed with only visual inspection. The application of NDE(nondestructive evaluation) is required because the visual inspection has many restrictions. Among many NDE techniques, the stress wave technique was used in this research. This study focused on evaluating the extent of decay in members of ancient structures, using stress wave nondestructive technique. For application of stress wave technique to ancient structures, the threshold time which divides members into categories according to degree of decay should be determined in advance. Stress wave timer (Metriguard Model 239A) was used in this study, specimens used in this research were the members obtained from six ancient structures. All specimens were identified as Hard Pine(Pinus densiflora S. et Z. or Pinus thunbergii P.) by microscope. Each member was tested with stress wave passing radially through the pith. In this study, the stress wave time of $12{\mu}s$/cm could distinguish between sound and decayed specimens with accuracy of 77.5 percent. Also, decayed specimens could be separated into moderate and severe categories by stress wave time of $20{\mu}s$/cm. Among the three decay location groups (exterior, mixed, interior), the exterior group could be classified into sound, moderate and severe decay with the greatest accuracy. Stress wave transit time was not sensitive to small decay pockets located in interior of the member.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.240-245
• /
• 2001

Ultrasonic inspection system is consisted of the operator, equipment and procedure. The reliability of results in ultrasonic inspection is affected by its ability. Furthermore, the reliability of nondestructive testing is influenced by the inspection environment, other materials and types of defect. Therefore, it is very difficult to estimate the reliability of NDT due to various factors. In this study, the probability of detection, used logistic probability model and Monte Carlo simulation, estimated the reliability of ultrasonic inspection. The utility of the NDT reliability assesment is verified by the analysis of the data from round robin test applied these models.

• Structural Monitoring and Maintenance
• /
• 제2권1호
• /
• pp.19-34
• /
• 2015

One of the main causes of a limited use of nondestructive evaluation (NDE) technologies in bridge deck assessment is the speed of data collection and analysis. The paper describes development and implementation of the RABIT (Robotics Assisted Bridge Inspection Tool) for data collection using multiple NDE technologies. The system is designed to characterize three most common deterioration types in concrete bridge decks: rebar corrosion, delamination, and concrete degradation. It implements four NDE technologies: electrical resistivity (ER), impact echo (IE), ground-penetrating radar (GPR), and ultrasonic surface waves (USW) method. The technologies are used in a complementary way to enhance the interpretation. In addition, the system utilizes advanced vision to complement traditional visual inspection. Finally, the RABIT collects data at a significantly higher speed than it is done using traditional NDE equipment. The robotic system is complemented by an advanced data interpretation. The associated platform for the enhanced interpretation of condition assessment in concrete bridge decks utilizes data integration, fusion, and deterioration and defect visualization. This paper concentrates on the validation and field implementation of two NDE technologies. The first one is IE used in the delamination detection and characterization, while the second one is the USW method used in the assessment of concrete quality. The validation of performance of the two methods was conducted on a 9 m long and 3.6 m wide fabricated bridge structure with numerous artificial defects embedded in the deck.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.369-375
• /
• 2002

The results of source location in terms of AE signal occurred by the spot exciting as suggested in this research, it has been confirmed that AE technique is quite fruitful in figuring out the location of the occurrence, form, size and direction of the defects. Thus, it is expected that the application of the experimental method suggested in this study would make it possible to identify, in the nondestructive way, the location of the defect in the material.

• Computers and Concrete
• /
• 제4권4호
• /
• pp.285-298
• /
• 2007

Corrosion of Reinforcement (rebar) is nondestructively estimated by the half-cell potential measurement. As is the case with other nondestructive testings (NDT), understanding of the underlying principles should be clarified in order to obtain meaningful results. Therefore, the measurement of potentials in concrete is analytically investigated. The effect of internal defects on the potentials measured is clarified numerically by the boundary element method (BEM). Thus, a simplified inversion by BEM is applied to convert the potentials on concrete surface to those on rebars, taking into account the concrete resistivity. Because the potentials measured on concrete surface are so sensitive to moisture content, concrete resistivity and surface condition, an inverse procedure to convert the potentials on concrete surface into those on rebars is developed on the basis of BEM. It is found that ASTM criterion is practically applicable to estimate corrosion from the potential values converted. In experiments, an applicability of the procedure is examined by accelerated corrosion tests of reinforced concrete (RC) slabs. For practical use, the procedure is developed where results of IBEM are visualized by VRML (Virtual Reality modeling Language) in three-dimensional space.

• Composites Research
• /
• 제26권3호
• /
• pp.195-200
• /
• 2013

본 연구에서는 탄소섬유강화플라스틱(CFRP, carbon fiber reinforced plastics)에 충격을 가하여 발생하는 결함에 대한 분석을, 특히 눈으로 식별이 어려운 손상(Barely Visible Impact Damage: BVID)을 중심으로 진행하였다. 낙하형 충격시험기를 통하여 충격 시험을 진행하였고, 추의 자유 낙하를 통하여 실제 항공기에 적용된 복합재료에 충격에 의한 손상을 모사한 후, 표면과 내부에 다양한 비파괴 검사를 적용하여 충격에너지에 따른 시편의 결함 거동을 확인하고 살펴보았다. 이를 위해 여러 가지 비파괴 검사법을 사용하여 결함을 비교, 분석, 검토하였다. 그 결과 눈으로 식별이 어려운 손상과 이를 측정하기 위해 사용된 각각의 측정법에 따른 특성이 논의되었다. 일반적으로 육안으로 보이는 표면결함보다 큰 결함이 내부에 발생하였으나, 충격에너지가 작아지면 내부결함이 표면결함 보다 작을 수 있다는 사실이 관찰되었다.

• 비파괴검사학회지
• /
• 제19권4호
• /
• pp.300-313
• /
• 1999

비파괴검사 기술의 레벨 향상과 안정화를 통한 시간적 재현성이 있는 비파괴검사 결과의 확보를 위해서는 비파괴검사 기술자의 자격 인정 및 인증(nondestructive testing qualification and certification of personnel)제도의 확립이 매우 중요하다. 비파괴검사 결과에 대한 유효성은 비파괴검사을 실시하는 사람의 능력이나 비파괴검사에 대한 책임을 지고 있는 사람의 능력에 크게 의존한다. 1974년부터 원자력 선진국들이 중심이 되어 수행된 PISC 프로그램(program for inspection of steel components) 및 EPRI 등에서는 순회시험 (piping inspection round-robin: PIRR trial) 결과 기존 비파괴검사 방법은 모의 시험편에 있는 상당히 큰 결함도 탐지하지 못하거나 정확한 결함크기를 측정하는데 실패한 경우가 있으며, 검사자의 기량 또는 신체조건에 상당한 차이가 있는 것으로 나타났다[1]. 국제표준화기구(ISO)의 비파괴검사 기술자의 기량인정 및 인증에 대한 국제규격안 DIS(draft international standard) 9712에서는 비파괴검사를 기획 실시 감독 감시 평가를 하기 위한 적절한 이론적 및 실무적 지식을 필요로 하는 기술자의 능력을 평가하고, 문서화하는 방법을 제공하는 절차를 제시하고 있다. 국제표준화기구에 의한 비파괴검사 기술자의 기량인정 및 인증에 대한 국제통합을 추진하는 동기는 제 3자에 의한 체계적인 인증시스템을 가지고 있지 않은 나라와 새로운 NDT 방법에 대해서 인증제도를 적용할 때 세계적인 공통성을 갖도록 유도하기 위함이다. 현재, 우리나라 비파괴검사 기술자의 기술자격 인증제도는 국가기술자격법에 의거하여 한국산업인력공단에서 주관하여 기술사, 기사, 산업기사, 기능사로 구분하여 실시하고 있다. 국제표준화기구의 비파괴검사 기술자의 자격과 인증에 대한 국제 통합화(안)[2]이 거의 마무리 단계에 있고 일본을 비롯한 많은 나라가 국제규격을 기초로 한 새로운 인증제도를 발족시켜 거의 시행 단계에 있다. 반면 국내에서는 한국비파괴검사학회(KSNT)에서 비파괴검사 기술자의 자격인정 및 인증제도의 개선방향이 제시된 바 있고 [3], 표준화위원회에서 나름대로 준비를 하고 있으나 아직 구체적인 실천단계에와 있지 못하다. 본 고에서는 최근 대폭수정 보완된 ISO/DIS 9712 국제규격(안)을 회원들에게 소개하고, 우리나라의 향후 대응방안에 관한 회원 여러분의 의견 수렴에 도움을 주고자 ISO/DIS 9712(1997)를 번역하여 제공한다.