• Journal of The Korean Institute of Defense Technology
• /
• v.5 no.3
• /
• pp.1-7
• /
• 2023

Recently, in the defense field, efforts are being made to collect data by building data centers to incorporate artificial intelligence technology. Weapon system training data can be used as input data for artificial intelligence models and can be used as high-quality data to maximize training performance and develop military strategies. However, training data contains personal information such as the names and military numbers of the personnel who operated the equipment, and training records that reveal the characteristics of the weapon system. If such data is passed on to the enemy, not only the specifications and performance of the weapon system but also the proficiency of each operator may be exposed. In this paper, we propose a pseudonym processing methodology for education and training data security and also suggest a direction for revising related laws.

• Journal of Biosystems Engineering
• /
• v.37 no.4
• /
• pp.215-224
• /
• 2012

Purpose: This study was conducted to classify the energy efficiency of 131 tractor models tested during from 2006 to 2010 in Korea. Methods: Four sub-indexes were developed using the fuel consumptions at 60% and 90% of rated speed with partial loads and at pull speeds of 3.0 km/h and 7.5 km/h with maximum drawbar pull. Weighting factors of the sub-indexes were also considered to reflect the characteristics of tractor's actual working hours in Korea. Four sub-indexes were integrated into a classification index. Using the developed classification index, a five-classification system was made on the basis of normal distribution of tractors over the classification range. Percentage of $1^{st}$ grade interval was expected to be close to 15%, $2^{nd}$ grade 20%, $3^{rd}$ grade 30%, $4^{th}$ grade 20%, $5^{th}$ grade 15%. Results: Number of $1^{st}$ grade was 21, $2^{nd}$ grade 23, $3^{rd}$ grade 39, $4^{th}$ grade 33, $5^{th}$ grade 15 among 131 models. Conclusions: Classification index was developed by integrating four sub-indexes. By the classification method using developed index, distribution of classified tractors was acceptable for practical application.

• Journal of Photoscience
• /
• v.10 no.2
• /
• pp.203-208
• /
• 2003

Two coupled molecules were successfully synthesized by condensation of amine-donor-substituted barbituric acid derivativies as nonlinear optical chromophores. A flexible spacer of the alkyl chain with different lengths of carbon chains (5 and 6 carbons) was introduced between two chromophores, which prevented crystallization and aggregation of molecules. Two coupled molecules (B-Cn-B, n=5, 6) had glass-transition temperatures on a second heating around 81 and 76$^{\circ}C$ without melting points, respectively. To explore the linear optical properties, thin-films were prepared and examined by a photometry method using Nd:YVO$_4$ CW laser. Also, microscopic and macroscopic nonlinear optical properties were measured by Hyper-Rayleigh Scattering (HRS) and the Maker Fringes method using Nd:YAG ps pulse laser, respectively. In spite of the moderate hyperpolarizabilities of coupled molecules, the second order NLO coefficient (d$\_$33/) was larger than the conventional Disperse Red 1 doped PMMA polymeric system.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.391-395
• /
• 1999

We present the measurement of the diffraction efficiency and response time of the photorefractive grating recorded in $LiNbO_3$ photorefractive crystal doped with 4%-mole MgO. Two laser sources were used in the experiments; frequency-doubled Q-switched Nd:YAG laser ($\lambda$=532 nm) and cw Ar-ion laser ($\lambda$=514.5 nm). The same optical geometry was also used in both experiments in order to maintain the experimental consistency. Using the two-wave mixing scheme in both experiments we measured the maximum diffraction efficiency in the range of beam intensity of 1.6~100 W/ $\textrm{cm}^2$, and the response times for both cases of recording and erasing. Two sets of results obtained from the experiments are compared and analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3215-3226
• /
• 1996

In this paper a K-band harmonic oscillator competitive to ordinary Push-Push type oscillators is introduced. This oscillator is composed of two-X-band dielectric resonance circuits. To favor its harmonic generation, the load effect and the bias effect are studied to allow the maximum harmonic distortion. As results, the dielectric resonated load and the class A bias are used for the 2nd harmonic generation. analytical study for modelling of voltage controlled dielectric resonator is carried out with theoretical background. The performance of the circuit is evaluated by simulation using harmonic balanced method. The novel structure has ont only a voltage tuning circuit but also an output port at fundamental frequency as the function of prescaler for phase lockede loop application on the just single oscillation structure. In experimentation, the output freqneyc of the 2nd harmonic signal is 20.5GHz and the maximum power level of output is +5.5dBm without additional post amplifiers. the harmonic oscillator exhibits -30dBc of high fundamental frequency rejection without added extra filters. The phase noise of -90dBc/Hz at 100kHz off-carrier has been achieved under free running condition, that satisfies phase noise requirement of IESS 308. The proposed oscillator may be utilized as the clean and stable fixed local oscillator in Transmit Block Upconvertor(TBU) or Low oise Block downconvertor(LNB) for K/Ka-band digital communications and satellite broadcastings.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.485-491
• /
• 2012

In this paper, the implementations of a $0.1{\mu}m$ gallium arsenide (GaAs) pseudomorphic high electron mobility transistor process for a low noise amplifier (LNA), a subharmonically pumped (SHP) mixer, and a single-chip receiver for 70/80 GHz point-to-point communications are presented. To obtain high-gain performance and good flatness for a 15 GHz (71 GHz to 86 GHz) wideband LNA, a five-stage input/output port transmission line matching method is used. To decrease the package loss and cost, 2nd and 4th SHP mixers were designed. From the measured results, the five-stage LNA shows a gain of 23 dB and a noise figure of 4.5 dB. The 2nd and 4th SHP mixers show conversion losses of 12 dB and 17 dB and input P1dB of -1.5 dBm to 1.5 dBm. Finally, a single-chip receiver based on the 4th SHP mixer shows a gain of 6 dB, a noise figure of 6 dB, and an input P1dB of -21 dBm.

• Korean Journal of Organic Agriculture
• /
• v.12 no.2
• /
• pp.209-217
• /
• 2004

The aim of this experiment was to investigate the effects of applying times and dilution rates of cattle slurry on dry matter yields of orchard grass. Cattle slurry was applied at the rates of average mineral nitrogen fertilizer equivalent to 150 kg/ha/year in 3 cutting frequency. Significantly higher dry matter yields than that of no fertilization (3.04 ton DM/ha) were recorded in the application of diluted cattle slurry(5.38~6.25 ton DM/ha) (p<0.05). Especially, this tendency was shown with higher annual dry matter yields at the partitioned dressing times, such as at the applications for 1st and 2nd growth, 1st and 3rd growth, and 1st, 2nd and 3rd growth respectively. The yields of annual dry matter both at fertilizing phosphorus and potassium, and phosphorus, potassium and nitrogen were higher than no fertilization as 5.41 tons and 8.78 tons per ha respectively. However, with application of diluted cattle slurry, dry matter yield par year (5.84 ton DM/ha) was higher than those of fertilizing phosphorus and potassium. The efficiencies of dry matter production with mineral and cattle slurry nitrogen application (kg DM/kg N) were 225 and 15.8~18.7 kg DM/kg N respectively. Especially, these tendencies were higher in diluted application plots than in no-diluted application plots of cattle slurry.

• Journal of Powder Materials
• /
• v.13 no.2 s.55
• /
• pp.112-118
• /
• 2006

[ $R_{1/3}Sr_{2/3}FeO_{3}$ ](R=Pr, Nd, and Sm) was synthesized and their magnetic properties and charge ordering(CO) transition related with lattice dynamics and oxygen vacancy were systematically investigated. The charge disproportion ation(CD) in $R_{1/3}Sr_{2/3}FeO_{3}$(R=Pr,Nd) was in which two kins of iron with valence state $Fe^{3+}$ and $Fe^{5+}$ were found with ratio of 2:1. In this charge ordering state a sequence of $Fe^{3+}Fe^{3+}Fe^{5+}Fe^{3+}Fe^{3+}Fe^{5+}$ exists aligned along the [111] direction of the pseudocubic perovskite structure. The charge ordering exist in distorted structure involving $t_{pd}$ hybridization. The disordering phases coexist in distorted structure as temprature in creases that is controlled amount of oxygen vacancy. The magnetic hyperfine fields indicate charge tranfering temperature as it dissapeared drastically.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.513-520
• /
• 2022

During the long-time service of a bolt, its preload may suffer slight perturbations or significant reductions. It is a dilemma to monitor preload changes at high resolution and full scale. Approaches for bolt preload monitoring with multi-resolution should be developed. In this paper, a simple and effective multi-resolution bolt preload monitoring approach using ultrasonic guided waves (UGW) is proposed. A linear relationship between the time-of-flight (TOF) variation of multi-reflected waves and preload is derived to theoretically reveal the multi-resolution properties of UGW. The variations of TOF before and after the slight preload perturbations are extracted by using a global evaluation method. Experimental results show that the signal-to-noise ratio (SNR) of the 1^st, 2^nd, and 3^rd-reflected UGWs is larger than 20 dB. The resolution of the 2^nd-reflected UGW is higher than that of the 1^st-reflected UGW and lower than that of the 3^rd-reflected UGW. The ultimate detectable resolutions of bolt preload (DRBP) of the 1^st and 3^th-reflected UGWs are 0.9% and 0.5%, respectively. By using the 1^st and 3^th-reflected guided waves, the bolt looseness with different degrees can be monitored simultaneously.

• Korean Journal of Environmental Biology
• /
• v.25 no.4
• /
• pp.313-318
• /
• 2007

Monitoring for the quality of coastal water is necessary to improve its biological resources and to maintain healthy environments. We measured the concentrations of phenols, nine polychlorinated biphenyls (PCBs), tributyltin (TBT) in surface water at 5 stations and the concentrations of mercury (Hg), chromium (Cr (VI)), cadmium (Cd), lead (Pb) in surface water of 10 stations in Tongyeong marine ranching ground of Korea in August, 2003. The concentrations of analytes were determined as follows: phenols: 1.6$\sim$2.8 ppb, PCBs: not detected (ND), Hg: <0.1 ppb, Cr (VI): 0.01$\sim$5.32 ppb, Cd: ND$\sim$0.41 ppb and Pb: 0.43$\sim$2.60 ppb. These concentrations satisfied the standards of human health protection in coastal water by Ministry of Environment, Republic of Korea as follows: phenols; 5 ppb, PCBs: 0.5 ppb, Hg: 0.5 ppb, Cr (VI): 50 ppb, Cd: 10 ppb and Pb: 50 ppb. TBT was not listed in the standards. The concentrations of Sn in TBT analyzed in sea water of Tongyeong marine ranching ground were in the range of ND$\sim$0.0273 ppb which are similar with the values of 8$\sim$35 ng Sn $L^{-1}$ (0.008$\sim$0.035 ppb) in Chinhae Bay studied by Shim et al.. Therefore, the quality of sea water in Tongyeong marine ranching ground was safe enough to protect human health.