• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.362-364
• /
• 2001

The pulsed laser deposition(PLD) technology was used for the deposition of phosphor substance, Gd$_2$O$_3$on commercial glass. An Nd:YAG laser was employed for the deposition (wavelength 266nm, energy up to 100mJ/pu1se, pulse duration is 5ns and repetition rate 10 Hz). With respect to films grown by conventional PLD, this study exhibited the condition at normal temperature. Experiments were done without any reactive gas at a pressure of 10$^{-5}$ ~10$^{-6}$ Torr using second harmonic(λ=532 nm) and fourth harmonic(λ=266 nm) Nd:YAG laser. Analyses of the deposited material grown are performed by EDX, AFM, SEM, PL meseurements.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.115-119
• /
• 1998

Possibilities of substitution was investigated in the Langadite({{{{ {La }_{3 } {Ga }_{ 5}{SiO }_{14 }}}}}) system.{{{{{TiO}_{2 }}}}} was substitutes for{{{{{SiO}_{2 }}}}} followed by the substitution of{{{{{Nd}_{2 }{O}_{3}}}}}fo{{{{{La}_{2 }{O}_{3}}}}}. An effort to replace GeO2, which is reported to have been substitution for{{{{{SiO}_{2 }}}}} in the Langasit e system, for{{{{{TiO}_{2 }}}}} i n{{{{{ Nd}_{ 3} {Ga }_{5 } {TiO }_{14 } }}}} was also undertaken. In another experiment,{{{{{ Y}_{ 2}{ O}_{3 } }}}} was substituted for{{{{{ La}_{2 } {O }_{ 3} }}}}. All of substitution possibilities were investigated through solid state reactions and analyzed with XRD. Further analysis was carried out with an SEM. Lastly, the dielectric constants of the sintered body were measured.

• Solar Energy
• /
• v.17 no.1
• /
• pp.93-102
• /
• 1997

The numerical study on the natural convection inside the L-shaped enclosure having a protrusion of which left wall is maintained at $T_c$. Right wall and part of the bottom and 2nd floor are at $T_h$ has been performed numerically for aspect ratio A=1, geometrically different cases and for $Ra=5{\times}10^5{\sim}2{\times}10^6$. As the L-shaped of the enclosure goes thicker horizontally and the smaller 2nd floor's length, the mean Nusselt number at the left cold wall becomes smaller for same Ra, and there is little influence of the increase of Ra on mean Nusselt number.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.428-433
• /
• 1993

The second harmonic of Q-switched Nd:YAG laser beam with gaussian mode is cut off by pinhole of a certain radius and its central portion passed through pinhole is focused by converging lens. It is confirmed that the shape of this beam in focal region is central symmetric but non-gaussian. Change of transmittance due to self-focusing is investigated by scanning (z-scan) $CS_2$ of 1 mm thickness in the focal region. It is found that the observed results can be consistently explained by Fresnel theory within 1.5% accuracy and efficiency of self-focusing depends on spatial shape of incident beam.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.212-216
• /
• 1997

A pulsed field magnetometer with maximum applied field of 130 kOe has been constructed. The pulsed field generated by a 18 kJ capacitor bank system combined with a pulse coil was damped oscillation with the period of 10.12 ms. Magnetic hysteresis loop was measured by induction method during 10.12 ms of a pulse duration from the first positive to the second positive peak. The difference from DC magnetic properties due to the eddy current effect was inferred below 3% for the NdFeB magnet with the diameter below 5 mm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.529-532
• /
• 2002

We experimentally investigate the evolution of nanosecond Stokes pulses in a single-pass Raman laser pumped by a Q-switched Nd: YAG laser at 1064 nm. As a Raman medium, a GeO$_2$-doped graded-index multimode fiber of 220m long is used. We demonstrate that efficient generation of several Stokes components with 1.5-2.7 nanosecond pulsewidth is obtained by varying the input pump energy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.598-605
• /
• 2016

One of the effective methods for angular deception against monopulse radar is a cross eye technique. The typical cross eye technique can cause significant angular errors to monopulse radar by using two transceivers which transmit the signals with opposite phases. However, typical cross eye systems have high complexity of implementation because two transceivers should be installed with enough distance on the platform. In this paper, we propose a new cross eye technique with single transceiver based on the multipath effect. Then, angular deception performance of the proposed technique is analyzed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.99-102
• /
• 1999

A mixture which was made from organic gel, glass powder and ceramic powder was masklessly etched for fabrication of barrier rib of PDP(Plasma Display Panel) by focused Ar$^{+}$ laser( λ =514 nm) and Nd:YAG(λ =532, 266 nm) laser irradiation at the atmosphere. The depth of the etched grooves increases with increasing a laser fluence and decreasing a scan speed. Using second harmonic of Nd:YAG laser, the threshold laser fluence was 6.5 mJ/$\textrm{cm}^2$ for the sample of PDP barrier rib softened at 12$0^{\circ}C$. The thickness of 130 ${\mu}{\textrm}{m}$ of the sample on the glass was clearly removed without any damage on the glass substrate by fluence of 19.5 J/$\textrm{cm}^2$....

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.672-678
• /
• 1995

The magnetic separation of Nd-Fe-B powders prepared by melt-spun and HDDR processes was investigated. The experiments show that the ununiform melt-spun powders can be separated into various standards by means of magnetic separation method. The magnetic powders with higher properties were obtained by the use of suitable separating field. For example, the properties of ununiform melt-spun powders are Br=7.95 kG, iHc=9.93 kOe and (BH)max=10.2 MGOe before separating. Through separating in different magnetic fields, the powders obtained with a separating field of 780 Oe has the optimum properties of Br=7.7 kG, iHc=11.0 kOe and (BH)max=15.3 MGOe. The magnetic properties of the HDDR magnetic powder are hardly separated by the magnetic separation method.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.2
• /
• pp.71-76
• /
• 2021

Ag925, silver with added copper, is popular alloy due to its low price. However, it has a difficult to use because of the low corrosion resistance. In various alloys, neodymium (Nd) works as an element to improve corrosion resistance by reacting with interstitial elements in the alloy. When 1.5 wt. % Neodymium was added to Ag925, the potential on the activated polarization in a potentiodynamic polarization test was increased from -0.15 V to -0.05 V. Ag925 with added neodymium showed the passivation after activation polarization. But When the potential increased around 50 mV, the current density is increased to 3 × 10-3. Ag925 with the 1.5 wt. % Nd had the low corrosion rate.