• 대한치과보철학회지
• /
• 제41권1호
• /
• pp.71-80
• /
• 2003

Development of new ceramic and esthetic need of patient increased the use of ceramic restorations. The purpose of this study was to confirm the possibility of recycling for IPS Empress2 which has a lot of advantages in esthetics. 1st, 2nd and 3rd pressed disc-shaped($10{\times}1.5mm$) IPS Empress 2 specimens were made with IPS Empress ingot(shade 200, Ivoclar, Liechtenstein) and pressing furnace(IPS Empress EP 500, Ivoclar, Liechtenstein). Flexure strength was measured with universal testing machine(Zwick 145641, Zwick, Germany), and color change and staining resistance of specimens were evaluated with colorimeter (Model TC-6FX, Tokyo Denshoku Co., Japan). The followings were drawn from this study : 1. Flexure strength of the 1st, the 2nd, and the 3rd pressed specimens showed 236.78 MPa. 247.16MPa, and 220.72MPa, respectively. Flexure strength of the 2nd pressed specimens was higher than others, but there's no statistical difference between them. 2. The color difference between the 1st and the 2nd pressed specimens was 3.25, and that between the 1st and the 3rd pressed specimens was 3.63(P<0.05). 3. The color change after staining of the 1st, the 2nd. and the 3rd pressed specimens were 1.43, 2.64, and 1.45, respectively. In this study, reused IPS Empress 2 specimens showed insignificant change of flexure strength and stain resistance, but they showed some color change according to reuse. From this results, the limited possibility of reuse for IPS Empress 2 could be considered.

• 한국자기학회지
• /
• 제12권2호
• /
• pp.51-56
• /
• 2002

마그네트론 스퍼터링을 이용하여 퍼멀로이 박막의 제조시 요구되는 자기이방성 조절을 위하여 필요한 조건을 NdFeB자석과 3-D전산모사를 이용하여 평가하였으며, 또한 같은 조건에서 제조된 박막의 특성을 조사하였다. 타겟과 기판과의 거리가 5cm인 경우 타겟 자석과 자기이방성 조절을 위하여 장입된 영구자석의 상호 작용에 의하여 기판에 평행한 자속을 얻기 위한 조건이 전산모사 결과 영구자석간의 거리 변화에 매우 민감하였으며, 최적의 조건의 두 영구자석의 간격이 70mm에서 가장 균질한 자속을 대면적에서 얻을 수 있음이 확인되었다. 투입전력 450 W에서 기판에 장착시킨 NdFeB 자석간 거리(48, 60, 70, 80, 85mm) 를 변화시킨 결과 포화자화 값은 10~12 kG, 보자력은 0.2~1 Oe, 비저항은 20 $\mu$$\Omega$cm의 값을 갖는 퍼멀로이가 제조되었으며, 자기적 이방성은 전산모사의 결과와 일치하였다. 그 결과 자석간의 간격이 70mm에서 제조된 두께 1 $\mu$m 퍼말로이의 유효투자율이 10 MHz에서 2500을 유지하는 결과를 얻었다.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.276-292
• /
• 1996

The purpose of this study was to evaluate whether removal of gingival epithelium with pulsed Nd :YAG laser could inhibit the downgrowth of junctional epithelium after alloplastic material grafting in periodontal bone defect. The periodontal bone defects were created surgically on the palatal aspect of the upper right and left molar teeth in 30 rats and filled with resorbable calcium carbonate($Biocoral\;450^{(R)}$: Inoteb, France). The control sites(right molar area) was sutured. The test side (left molar area) received controlled deepithelization of the oral and sulcular epithelium with pulsed Nd:YAG laser($Sunrise\;Maste^{(R)}$: Sunrise Technologies, U.S.A.) under the mode of 1.75W, 15Hz, 116mJ/pulse and was sutured. The control and test sites were evaluated clinically and histologically, at 1, 3, 7, 14, and 28 days postoperation. Clinically, the gingiva showed normal color and shape at the 5th day in the control site and at the 10th day in the test sites. Histologically, the junctional epithelium was formed at the 7th day in the control sites and at the 14th day in the test sites, and the long JE attachment were observed at the 28th day in both sites. The attachment of connective tissue to root surface was observed initially at the 7th day in the control sites and at the 14th day in the test sites, and completed at the 28th day in both sites. In summary, these results showed that the removal of oral epithelium using pulsed Nd:YAG Laser could not prevent epithelial downgrowth after alloplastic material implantation in rat periodontal bone defect.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1060-1062
• /
• 1999

Pulsed Nd:YAG laser is used widely for materials processing and instrumentation. It is very important to control the laser energy density in materials processing by a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this study, the alternating charge-discharge system was designed to adjust a pulse repetition rate. And the parallel mesh is added to increase laser output power. This system is controlled by one chip microprocessor and allows to replace an expensive condenser for high frequency to a cheap condenser for low frequency. In addition, we have investigated the current pulse shape of flashlamp and the operating characteristics of a pulsed Nd:YAG laser. As a result, it is found that the laser output of the power supply using the parallel mesh and the alternating charge-discharge system is not less than that of typical power supply. As the pulse repetition rate rises from 10pps to 110pps by the step of 20pps at 1000V and 1200V, it is found that the laser efficiency decreases but the laser output power increases about 5W at each step.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.247-252
• /
• 2012

Effect of Cu and $DyF_3$ powder mixing with Cu-free (Nd, Dy)-Fe-B jet-milled powder on the magnetic properties of sintered magnets was investigated. The coercivity of a magnet prepared from the Cu-free (Nd, Dy)-Fe-B powder was about 10 kOe even though the alloy powder already contained some Dy (3.5 wt%). When small copper powder was blended, however, the coercivity of the magnet increased almost 100%, exhibiting about 20 kOe. On the contrary, the coercivity enhancement was moderate, about 4 kOe, when dysprosium content in the sintered magnet was simply increased to 4.9 wt% by the addition of small $DyF_3$3 powder.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권6호
• /
• pp.2297-2301
• /
• 2015

Background: Despite widely adopted standard methods for follow-up including cystoscopy plus cytology, recurrence rates of non muscle-invasive bladder cancer (NMIBC) have not improved over the past decades, still ranging from 60% through 70%. Hence, widely acceptable surveillance strategies with excellent sensitivity are needed. Early recurrence has led to the development of a novel cystoscopy technique utilizing photodynamic diagnosis (PDD). Although, no studies have evaluated the efficacy of PDD for patients of MIBC, BCG failure or 2nd-transurethelial resection (TUR). Materials and Methods: The present study was performed from October 2012 through May 2013. IRB approved 25 patients initially underwent a cystoscopy examination of white light and blue light followed by the resection of tumors identified. Resections were performed from bladder mucosa areas considered suspicious at PDD, along with PDD negative normal bladder mucosa area resected by random biopsy. Specimens were divided into two groups, PDD positive and negative. Primary endpoints were sensitivity and specificity. Results: A total of 147 specimens extracted from 25 patients were included in the analysis. Some 45 out of 92 PDD-positive specimens were confirmed to have bladder cancer, and 51 out of PDD-negative 55 specimens were confirmed to be cancer negative. The sensitivity of PDD was 91.8% (45/49) and specificity was 52.0% (51/98). The sensitivity:specificity was 89.5% (17/19) : 47.6% (30/63) in 12 2nd-TUR patients, 90.5% (19/21) : 61.1% (11/18) in seven MIBC patients, and 95.0% (19/20) : 48.5% (16/33) in eight failed BCG cases. Conclusions: PDD-TURBT has high sensitivity to diagnose BC even for 2nd-TUR, MIBC or BCG failure cases.

• Preventive Nutrition and Food Science
• /
• 제8권4호
• /
• pp.321-329
• /
• 2003

In order to provide data on N-nitrosamine (NA) and sanitation in fish available in domestic markets, this study analyzed the levels of NA and its precursors in 9 samples of sea breams and yellow croakers, 12 samples of red-flesh fish, 38 samples of white fish, 5 samples of Alaska pollacks and cod, and 8 species of imported fish. Sea breams and yellow croakers had nitrite concentrations ranging from non-detectable (ND) to 7.4 mg/kg, red fish ND to 5.3 mg/kg, white fish ND to 18.7 mg/kg, Alaska pollacks 0.3 to 2.2 mg/kg, and imported fish from 0.4 to 12.8 mg/kg. Nitrates in sea breams and yellow croakers ranged from 1.2 to 41.19 mg/kg, red fish 0.6 to 26.1 mg/kg, white fish 4.3 to 75.9 mg/kg, Alaska pollacks 0.4 to 3.1 mg/kg, and imported fish ND to 16.0 mg/kg. DMA concentrations were 69.8 to 219.9 mg/l00 g in sea breams and yellow croakers, 4.1 to 336.3 mg/l00 g in red fish, 1.3 to 331.9 mg/l00 g in white fish, 15.7 to 312.3 mg/l00 g in Alaska pollacks, and 1.0 to 71.8 mg/l00 g in imported fish. TMA concentrations in sea breams and yellow croakers, red fish, white fish, Alaska pollacks and imported fish were 43.8∼496.2, 12.3∼127.0, 2.0∼525.9, 15.4∼122.4, and 4∼70.6 mg/l00 g, respectively. For NA in fish distributed in local markets, only N-nitro-sodimethylamine (NDMA) was detected, and its concentrations ranged from 4.7 to 73.7 $\mu\textrm{g}$/kg in sea breams and yellow croakers, 2.2 to 56.5 $\mu\textrm{g}$/kg in red fish, ND to 143 $\mu\textrm{g}$/kg in white fish, 3.8 to 33.3 $\mu\textrm{g}$/kg in Alaska pollacks, and 2.1 to 102.2 $\mu\textrm{g}$/kg in imported fish.

• 대한치과보철학회지
• /
• 제51권3호
• /
• pp.167-174
• /
• 2013

연구 목적: 본 연구는 서로 다른 세가지 블라스팅 처리를 한 티타늄 디스크에$Nd:YVO_4$ 레이저 조사 조건을 달리한 후 조사하여 티타늄의 표면 거칠기 및 표면 변화를 관찰하기 위함이다. 연구 재료 및 방법: 디스크 형태의 상용 순수 티타늄 시편을 30개 준비하여 시료 표면을 각각 10개씩 $ZrO_2$ (zirconium dioxide), $Al_2O_3$ (aluminium oxide), RBM (resorbable blasted media)으로 블라스팅(blasting)하고 초음파 세척하였다. $Nd:YVO_4$ 레이저(Laser Pro D-20, Laserval $Korea^{(R)}$, Seoul, South Korea)에서 주사속도(100, 300, 500 mm/s)와 시간당 진동량(반복률) (5, 15, 35 kHz)을 다르게 하여 9가지 조건을 설정하였다. 레이저 조사 후 주사전자현미경, X-선 회절 분석 및 에너지 분산X선 분광분석, 표면 거칠기 분석을 통해 각 시편을 평가하고 분석하였다. 결과: 주사전자현미경의 결과 레이저 조사를 시행하지 않은 티타늄 표면은 방향성이 없는 불규칙한 형상을 보였고 레이저 조사를 처리한 시편은 특징적인 형태가 관찰되었다. X-선회절분석결과$ZrO_2$, RBM 의 고유피크는 관찰되지 않았으나 $Al_2O_3$분사한 군에서는 알루미나의 고유 피크가 관찰되었다. 에너지 분산X선 분광분석을 통해 관찰한 티타늄의 산화도 경향성과 표면 거칠기는 유사하였다. 표면 거칠기는 주사속도와 반복률에 따른 차이를 보였다(P<.05). 결론: 레이저 조사 조건에 따라 티타늄 디스크의 미세구조와 표면 거칠기가 변화되었다. 레이저 조사는 골유착을 증진시키기 위한 임플란트 표면을 변화시키는 방법중의 하나로 여길 수 있을 것이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권5호
• /
• pp.365-374
• /
• 2009

Purpose : This research evaluates the effect of the use of absorbable membrane barrier with deproteinized bovine bone (Bio-$Oss^{(R)}$, Switzerland) on bone healing in surgically created critical-sized defects in rat calvaria. Materials and Methods : Two standardized transosseous circular calvarial defects (5 mm in diameter) are made in each calvarium of 30 rats. These rats are divided into negative control group(n=15), positive control group(n=15) and two experimental groups(n=15). In the negative control group, defects are only filled with blood clots. In the positive control group, defects are filled with autogenous bone obtained from calvarium; in the experimental group 1, defects are filled with deproteinized bovine bone; and in the experimental group 2, defects are filled with deproteinized bovine bone with absorbable membrane. At the postoperative 1 week, 3 weeks. and 6 weeks, clinical. histologic and histomorphometric evaluations of the defects are performed. Results : 1. The grafted bone without membrane in the calvarial bone defect was scattered but, the grafted bone with membrane was stable. 2. $BioMesh^{(R)}$ membrane was absorbed beginning at 3 weeks, and was absorbed considerably at 6 weeks while maintaining the structural form of the membrane. 3. The use of membrane blocked soft tissue invasion. 4. In histomorphometric analysis. it showed the greatest amount of new bone formation in the positive control group. The amount of new bone formation was greater in the experimental group 2 than experimental group 1. At 6 weeks. the amount of new bone formation was greater in the positive control group than experimental group l(p<0.005). Conclusion : These results suggest that membrane increase the stability of grafted bone and protects from soft tissue invasion, and the use of the membrane may promote new bone formation in deproteinized bovine bone graft area.

• 마이크로전자및패키징학회지
• /
• 제14권4호
• /
• pp.57-61
• /
• 2007

PCB제작방법으로 제작한 4층 사각코일과 Nd 영구자석을 이용하여 초소형발전기를 제작하였다. 선폭이 $100{\mu}m$로 제작된 4층 사각코일의 크기는 두께가 1.6 mm 면적이 $1{\times}1cm^2$ 와 $2{\times}2cm^2$이다. 진동발생장치를 제작하고 코일위에서 Nd 영구자석을 수평으로 움직여 교류전압을 발생시켰다. 진동수를 0.5 Hz에서 7 Hz까지 변화시키면서 전압 값을 측정하였다. 5.5 Hz의 진동을 발생시켜 $1{\times}1cm^2$의 크기의 코일에서 62 mV의 교류전압이 발생하였고 $2{\times}2cm^2$의 크기의 코일에서 245 mV의 교류전압이 발생하였다. 7 Hz의 진동수에서 $2{\times}2cm^2$의 크기의 코일에서 320 mV의 교류전압이 발생하였고 채배정류회로를 이용할 때는 7 Hz의 진동수에서 400 mV의 직류전압이 발생하였다.