• Progress in Superconductivity and Cryogenics
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2014

We calculated the resonance tunneling energy band in the BCS gap for Type-II superconductor in which periodic potential is generated by external magnetic flux. In this model, penetrating magnetic flux was assumed to be in a fixed lattice state which is not moving by an external force. We observed the existence of two subbands when we used the same parameters as for the $Nd_{1.85}Ce_{0.15}CuO_X$ thin film experiment. The voltages at which the regions of negative differential resistivity (NDR) started after the resonant tunneling ended were in a good agreement with the experimental data in the field region of 1 T - 2.2 T, but not in the high field regions. Discrepancy occurred in the high field region is considered to be caused by that the potential barrier could not be maintained because the current induced by resonant tunneling exceeds the superconducting critical current. In order to have better agreement in the low field region, more concrete designing of the potential rather than a simple square well used in the calculation might be needed. Based on this result, we can predict an occurrence of the electromagnetic radiation of as much difference of energy caused by the 2nd order resonant tunneling in which electrons transit from the 2nd band to the 1st band in the potential wells.

• Journal of Magnetics
• /
• v.14 no.1
• /
• pp.27-30
• /
• 2009

Various sintered magnets containing $28{\sim}31\;wt%$ Nd and $0{\sim}7\;wt%$ Dy were evaluated for coercivity and irreversible flux loss as a preliminary study to develop highly-coercive, high-temperature magnets that can be applied for driving motors in a hybrid vehicle. The sintered magnets were prepared in sequence of strip casting, HD treatment, jet milling, magnetic field pressing, sintering and post-annealing. Increasing Dy content and adjusting post-annealing temperature monotonically increased coercivity of magnets from about 14 kOe to 30 kOe. A magnet containing 28 wt% Nd and 7 wt% Dy exhibits a $(BH)_{max}$+$_i{H_c}$ value of almost 64. This is very close to what the automobile industry considers as the minimum value (65) for a hybrid vehicle system. Moreover, irreversible flux loss of the magnet was about 3% at $200^{\circ}C$, which is well less than the allowable limit (5%) to a driving motor in hybrid vehicles.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.63-70
• /
• 1980

This study was to determine the incidence of pulp stone in each tooth by means of analyzing 375 orthopantomograph taken from 375 patients (252 male), 125 female). The pictures were grouped by age, 20s, 30s, 40s, 50s, and sex. The results were as follows 1. In the group of 20s, male showed the highest incidence in the first molar (40~50%) and the second highest was in the 2nd molar about 35%~50%. In the female group, the first molar and the second molar showed 25%~40%. 2. In the group of 30s, the highest value was found on the first molar and the next was the 2nd molar which appeared 30%~40% in male. In the female, the first molar was 55%~70% and the 2nd molar 30%~50% 3. In the group of 40s, the first molar represented highest value about 45%~60% and the 2nd molar was 40~60% in the male. Female group also showed in the first molar 30%~50% and the second molar 25~30%. 4. In the group of 50s, the highest incidence was 40%~60% on the first molar and next was 35%~50% on the second molar in male, in femalegroup showed 30%~50% on the first molar and 25%~50% on the second molar. 5. The incidence in upper was higher than that of lower. 6. Comparison between right and left showed right was slightly higher than left side.

• Economic and Environmental Geology
• /
• v.24 no.3
• /
• pp.277-285
• /
• 1991

We applied Sm-Nd isotopic system to so-called amphibolites occurring within the Ogcheon group to provide constraints on the age of the metasedimentary rocks and to characterize tectonic environment of basaltic magmatism. An internal mineral isochron age of $677{\pm}91Ma({\sigma})$ was obtained from a coarse-grained, intrusive, amphibolite near Mungyeong. Considering previous studies on the age of the Ogcheon group, we interpret that the isochron represents either early metamorphic or emplacement age. The depositional age of the metasedimentary rocks intruded by the amphibolite would be prior to late Proterozoic. The present study and Cambro-Ordovician fossil evidences of previous workers suggest that both Precambrian and Phanerozoic rocks are present in the Ogcheon group. Positive ${\varepsilon}$ Nd values(+2.4 to +3.5) of four whole rocks indicate mantle origin for the amphibolite. These isotopic data, along with published immobile trace element data of Cluzel et al.(1989), strongly suggest that parental rocks of the amphibolite formed in an intraplate environment rather than in island arc or midocean ridge. The age and tectonic environment of amphibolites in the Ogcheon belt suggest that the basaltic magmatism may be related to the late Proterozoic break-up of a presumed supercontinent, but not to the Triassic(?) collision between North and South China continents.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.253-254
• /
• 2006

초미세립 복합상 영구자석은 연 경자성상의 크기와 분포에 큰 영향을 받는 자성재료이다. 또한, 결정립간 교환상호작용력은 초미세립 복합상 영구자석의 잔류자속밀도에 큰 영향을 미친다. 이에 $Nd_8Fe_{86-x}Nb_xB_6$(x=0, 1, 2, 3) 조성으로 급냉자성 분말을 제조하고, 열처리 후 자기특성을 평가하였다. Nb 첨가에 따른 $Nd_2Fe_{14}B$ 상과 $\alpha$-Fe 상과의 교환상호작용력을 Henkel(${\delta}M$) plot을 통해 평가하고, 각 상의 크기와 분포를 조사하여 자기특성 변화를 합리화하였다. 본 연구에서 얻은 최대 자기특성은 $B_r$ = 9.791 kG, $_iH_c$ = 5.565 kOe, 그리고 $(BH)_{max}$ = 14.61 MGOe였고, Nb를 첨가함으로서 보자력이 증가하였다.

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1345-1348
• /
• 2008

Titanium dioxide ($TiO_2$) shows antibacterial effects when exposed to near ultra violet (UV) light. In this study, $TiO_2$ photocatalytic continuous reactor was designed and applied to food-borne pathogens such as Vibrio parahaemolyticus ATCC 17802, Salmonella choleraesuis ATCC 14028, and Listeria monocytogenes ATCC 15313. $TiO_2$ films were prepared by conventional sol-gel dip-coating method using titanium tetra iso-propoxide (TTIP). The antibacterial activity of photocatalytic reactor with various flow rates and UV-A illumination time showed effective bactericidal activity. As the UV-A illumination time increased, survival rates of those bacteria decreased. After 60 min of UV-A illumination, the survival rates of V. parahaemolyticus and S. choleraesuis were less than 0.1%. However, that of L. monocytogenes was about 5% at that time point. These results present an effective way to exclude pathogenic bacteria from aqueous foods.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.298-302
• /
• 2008

We have developed a 270-W 15-kHz MOPA system based on side-pumped rod-type Nd:YAG gain modules. The master oscillator is a 3-W 15-kHz $TEM_{00}$ $Nd:YVO_4$ laser with a pulse duration of 30 ns. To preserve the high beam quality during the amplification, we use image relay and polarization rotation which can simultaneously compensate for thermal lensing and thermal birefringence generated in the rod-type gain modules. After the amplification to 270 W with six rod-type gain modules, the beam quality factor ($M^2$) of the amplified laser beam is 5-10, and the pulse duration is maintained at 30 ns.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.2
• /
• pp.148-158
• /
• 2019

The corrosion protection of AA2024 PPy coated samples doping with nanosized metal oxides, including $TiO_2$ and $CeO_2$ nanoparticles and $Nd_2O_3$ nanorods, during exposure to the solutions of 0.1 M $H_2SO_4$ and 3.5% NaCl was evaluated by electrochemical impedance spectroscopy (EIS) and linear polarization resistance (LPR) techniques. The nanorods of $Nd_2O_3$ were synthesized by cathodic pulse electrochemical deposition technique. The barrier properties of the different PPy coatings containing nanosized metal oxides immersed in $H_2SO_4$ solution were ranked as follows: $Nd_2O_3$ > $TiO_2$ > $CeO_2$. Therefore, the $Nd_2O_3$ coating sample provided the highest corrosion protection at any time of immersion up to 72 hours after immersing in $H_2SO_4$ solution. On the other hand, the $CeO_2$ coating sample displayed the best anticorrosive properties among the other coating samples after immersion in NaCl solution up to 28 days. This is due to the inhibition effect of cerium ions on aluminum alloys at near-neutral solutions.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1804-1812
• /
• 2022

The aim of this paper is to assess the reliability and accuracy of the PSI standard method, used in many previous works, for the quantification of ND uncertainties in the SPERT-III RIA transient, by quantifying the discrepancy between the actual inserted reactivity and the original static reactivity worth and their associated uncertainties. The assessment has shown that the inherent S3K neutron source renormalization scheme, introduced before starting the transient, alters the original static reactivity worth of the transient CR and reduces the associated uncertainty due to the ND perturbation. In order to overcome these limitations, two additional methods have been developed based on CR adjustment. The comparative study performed between the three methods has showed clearly the high sensitivity of the obtained results to the selected approach and pointed out the importance of using the right procedure in order to simulate correctly the effect of ND uncertainties on the overall parameters in a RIA transient. This study has proven that the approach that allows matching the original static reactivity worth and starting the transient from criticality is the most reliable method since it conservatively preserves the effect of the ND uncertainties on the inserted reactivity during a RIA transient.

• Transactions of the Korean hydrogen and new energy society
• /
• v.4 no.1
• /
• pp.31-39
• /
• 1993

In order to improve the hydrogen storage capacity and the activation property of the $MmNi_{4.5}Al_{0.5}$ alloy, the multiphase alloy system are prepared by adding the excess Zr in $MmNi_{4.5}Al_{0.5}$ alloy. It is estimated from the X-ray diffraction pattern and the energy dispersive X-ray analysis that the 2nd phases in $MmNi_{4.5}Al_{0.5}Zr_x$ alloys are $ZrNi_3$, ${\beta}$-Zr. Their morphology is also examined by the scanning electron microscope, and it shows the needle-like precipitation. As the Zr contents increase, the activation time and the plateau pressure decrease, sloping of the plateau pressure increase. Amount of the 2nd phases increase with Zr contents in $MmNi_44.5Al_{0.5}Zr_x$ alloys. The $MmNi_44.5Al_{0.5}Zr_{0.05}$ alloy, which shows the maximum storage capacity and the strong resistance to intrinsic degradation, is considered as a proper alloy for hydrogen storage.