• Korean Journal of Materials Research
• /
• 제3권2호
• /
• pp.175-184
• /
• 1993

Abstract Co-and/or AI-added Nd-Fe-B-based magnetic alloys were fabricated by using vacuum induction melting frunace, and melt-spun ribbons were made of the magnetic alloys with single roll rapid quenching method. The variation of magnetic properties of the melt-spun ribbons as a function of Cuwheel velocity (Vs) were investigated. Bonded magnets were made of the optimally quenched ribbon fragments, and the magnetic properties of the melt-spun ribbons and the bonded magnets were studied, relating to the microstructure and crystalline structure. Cu-wheel surface velocity had a strong effect on the magnetic properties of the melt-spun ribbons, and the maximum properties were obtained around Vs =20m/sec. The optimally quenched ribbon had a cellura-type microstructure, in which fine N$d_2$F$e_14$B grains were surrounded by thin Nd-rich phase. In case of a 2.1at% AI-added melt-spun ribbon, the magnetic properties were as follows: iHc, Br, and (BH)max were 15.5KOe, 7.8KG and 8.5MGOe respectively. And resin bonded magnets were fabricated by mixing optimally quenched ribbon fragments with 2.5wt % polyamide resin, compacting and binding at room temperature. The iHc, Br and (BH)max of bonded magnet were lO.2KOe, 4.4KG and 3.3MGOe respectively. And hot-pressed magnets were made by pressing the overquenched ribbons at high temperature. The magnetic properties of hot-pressed magnets were better than those of bonded magnets, and when the holding time was 8 minutes, the iHc, Br, and (BH)max of the hot-pressed magnet were 1O.8KOe, 7.3KG and 8.0MGOe respectively. Domain structure was mainly maze pattern, which means that the easy magnetization axis could be aligned, and the domain width of the hot-pressed magnets was smaller than that of bonded magnets.

• Culinary science and hospitality research
• /
• 제11권4호
• /
• pp.1-13
• /
• 2005

This study analyzed the levels of N-nitrosamine(NA) and its precursors such as nitrite, nitrate, dimethylamine and trimethylamine in 10 samples of mollusk fish, 4 samples of crustacea fish and 11 samples of shellfish from fish distributed in a local markets. Mollusk fishes had nitrite concentrations ranging from non-detectable(ND) to 9.4 mg/kg, crustacea fishes ND to 8.8 mg/kg, and shellfishes ND to 4.3 mg/kg. Nitrates in mollusk fishes ranged from ND to 19.3 mg/kg, crustacea fishes 4.1 to 79.9 mg/kg, and shellfishes 1.5 to 61.9 mg/kg. DMK concentrations were 11.2 to 551.4 mg/100g in mollusk fishes, 44.4 to 79.9 mg/100g in crustacea fishes, and 1.3 to 5.9 mg/100g in shellfishes. TMA concentrations in mollusk fishes, crustacea fishes, and shellfishes were 10.3${\sim}$292.4 mg/100g, 35.5${\sim}$90.3 mg/100g, and 2.3${\sim}$17.1 mg/100g respectively. Only N-nitrosodimethylamine (NDMA) was detected for NA in fish distributed in local markets. NDMA contentrations ranged from ND to 41.4 ${\mu}g/kg$ in mollusk fishes, 3.0 to 47.3 ${\mu}g/kg$ in crustacea fishes, and 1.7 to 12.1 ${\mu}g/kg$ in shellfishes.

• Journal of Sericultural and Entomological Science
• /
• 제39권2호
• /
• pp.140-145
• /
• 1997

Silkworm fed on mulgerry leaves with 1000 times diluted Insegar(main component : Fenoxycarb, ethyl-2-(4-phenoxyphenoxy)ethylcarbmate) and its effects was investigated on increase of the 5th larval silkgland weight and silk quality. The oral application of fenoxycarb showed increase of the silkgland weight. The whole period of the silkgland weight falls on the 2nd instar treatment by 13%, the 3rd day of the 4th instar by 111%(3100 mg) and the whole period of the 5th instar treatment rather decreased it by 66%(497 mg), as compared to 1470mg of the control. Female and male both increased 15%(1779mg) and 12%(1554mg) of the silkgland weight with the 2nd instar treatment, as compared to 1548mg and 1391mg in control, respectively. 118%(3368mg) and 104%(2832mg) of increase in the silkgland weight were also showed with the 3rd day of the 4th instar treatment but 70%(463mg) and 61%(539mg) of decrease were shown with the 5th instar treatment. The maximum weight of the middle silkgland weight increased by 6%(1248mg) and 127%(2673mg) with the 2nd instar and with the 3rd day of the 4th instar, respectively but 67%(393mg) of decrease took place, as compared to 1175mg of the control. The maximum increase of the posterior silkgland weight with whole peried of the 2nd instar treatment increased 12%(419mg) and 75%(656mg) and 64%(135mg) of decrease was shown, as compared to 374mg of the control. The oral application of Insegar at the 2nd instar increased 26 m of cocoon length, 4.0 cg of the cocoon filament weight and 0.21d of the silk denier, as compared to 1147 m of the cocoon length, 38 cg of the cocoon filament, 2.99d of the silk denier, weight of cocoon filament and silk denier, respectively but denier variance narrowed to 0.33d, as compared to that of the control.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.218-226
• /
• 1996

This study was performed to evaluate the possibility of pulpal damage by measuring temperature change occured in dentin according to the thickness of dentin, the time of irradiation and the output of laser energy when the dentin surfaces were irradiated with Nd-YAG laser under water coolant and no water coolant. Sound upper and lower molar teeth were sectioned with 1mm, 1.5mm and 2mm thickness of dentin discs and divided into 4 groups by dentin thiness. 0.5 watt, 1 watt, 1.5 watt and 2 watt-energied beam of pulsed 10 p.p.s of Nd : YAG laser was applied respectively to dentin surfaces for 8 secs and 16 secs when water coolant is used or not.Ant then the temperature changes occurd in dentin were measured at opposite surfaces of laser-irradiated dentin surfaces with digital thermometer. The results were as follow. 1. When the amount of irradiated energy was same, the temperatue changes of dentin were higher as the thickness of dentin discs was thinner(p<0.01). 2. When the amount of irradiated energy and the thickness of dentins were same, The temperature changes of dentin were lower under water coolant than under no water coolant in all groups(p<0.01). 3. With the increase of time of irradiation, the temperature changes of Dentin became higher in all groups and were steeply increased at initial period of irradiation of laser. 4. Under the same thickness of dentin, the temperature changes of dentin became higher as irradiated energy was increased. These results suggest that when the beam of Nd : YAG Laser is irradiated to dential hard tissue, amount of irradiating energy, thickness of dentin, using water coolant must be considered in order to minimize thermal damage of the pulp.

• Proceedings of the Optical Society of Korea Conference
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.260-263
• /
• 1990

We report the operation of an Nd+3 doped silica single mode fiber laser pumped by a 514.5nm Ar laser. A CW output power in excess of 0.27mW at 1.096um has been obtained with a sloped efficiency of 0.23% and a 15nm badnwidth.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 한국레이저가공학회 2003년도 춘계학술발표대회 논문개요집
• /
• pp.84-87
• /
• 2003

• The Journal of Korean Academy of Prosthodontics
• /
• 제34권1호
• /
• pp.101-124
• /
• 1996

In this study, we designed the finite element models of mandible with varying their connecting types between the prosthesis on implant fixture and 2nd premolar, which were free-standing case(Mf), precision attachment case(Mp), semiprecision attachment case(Ms) and telescopic case(Mt). The basic model of the designed finite element models, which contained a canine and the 1st & 2nd premolar, was implanted in the edentulous site of the 1st & 2nd molar by two implant fixtures. We applied the load in all models by two ways. A vertical load of 200N was applied at each central fossa of 2nd premolar and 1st implant. A tilting load of 20N with inclination of $45^{\circ}$ to lingual side was applied to buccal cusp tips of each 2nd premolar and 1st implant. And then we analyzed three-dimensional finite element models, making a comparative study of principal stress and displacement in four cases respectively. Three-dimensional finite element analysis was performed for the stress distribution and the displacement using commercial software(IDEAS program) for SUN-SPARC workstation. The results were as follows : 1 Under vertical load or tilting load, maximum displacement appeared at the 2nd premolar. Semiprecision case showed the largest maximum displacement, and maximum displacement reduced in the order of precision attachment, free-standing and telescopic case. 2. Under vertical load. the pattern of displacement of the 1st implant appeared mesio-inclined because of the 2nd implant splinted together. But displacement pattern of the 2nd premolar varied according to their connection type with prosthesis. The 2nd premolar showed a little mesio-inclined vertical displacement in case of free-standing and disto-inclined vertical displacement due to attachment in case of precision and semiprecision attachment. In telescopic case, the largest mesio-inclined vertical displacement has been shown, so, the 1st premolar leaned mesial side. 3. Under tilting load, The pattern of displacement was similar in all four cases which appeared displaced to lingual side. But, the maximum displacement of 2nd premolar appeared larger than that of the first implant. Therefore, there was large discrepancy in displacement between natural tooth and implant during tilting load. 4. Under vertical load, the maximum compressive stress appeared at the 1st implant's neck. Semiprecision attachment case showed the largest maximum compressive stress, and the maximum compressive stress reduced in the order of precision attachment, telescopic and free-standing case. 5 Under vertical load, the maximum tensile stress appeared at the 2nd implant's distal neck. Semiprecision attachment case showed the largest maximum tensile stress, and the maximum tensile stress reduced in the order of precision attachment, telescopic and free-standing case. 6. Under vertical load or tilting load, principal stress appeared little between natural tooth & implant in free-standing case, but large principal stress was distributed at upper crown and distal contact site of the 2nd premolar in telescopic case. Principal stress appeared large at keyway & around keyway of distal contact site of the 2nd premolar in precision and semiprecision attachment case, appearing more broad and homogeneous in precision attachment case than in semiprecision attachment case.

• Analytical Science and Technology
• /
• 제17권5호
• /
• pp.423-433
• /
• 2004

This study was examined occurrence of bisphenol A (BPA) and nonylphenol (NP) in waterworks system of Seoul, Korea from September 2002 to December 2003. The levels of BPA and NP in Han-river and its tributaries were as followed: Paldang-dam, ND(not detected)${\sim}0.033{\mu}g/L$ and $ND{\sim}0.823{\mu}g/L$; Kyungahn-creek, $ND{\sim}0.659{\mu}g/L$ and $ND{\sim}3.827{\mu}g/L$; Whangsuk-creek, $ND{\sim}0.528{\mu}g/L$ and $ND{\sim}12.724{\mu}g/L$, respectively. In water of 6 intake-station, the contents of NP and BPA were detected $0.122{\sim}2.724{\mu}g/L$, and $ND{\sim}0.260{\mu}g/L$, respectively. In the finished- and tap-water of three drinking water treatment plants (DWTPs) around Whangsuk-creek, BPA was not detected in all samples, while NP was in ppt levels in whole. Through the process of DWTP, also, the removal ratio of NP was above 80% in all this. Therefore, this result was suggested that levels of BPA and NP in waterworks system depended on non-point contaminants and swage treatment plants in the Han-river shed.

• Korean Journal of Optics and Photonics
• /
• 제13권2호
• /
• pp.140-145
• /
• 2002

We measured the absorption rate of a Nd:YVO$_4$crystal with a thickness of 1 mm and the output power characteristics of a cw Nd:YVO$_4$/KTP laser with respect to the change of wavelength and the polarizations of a tunable Ti:sapphire pump laser with a linewidth of 0.2 nm. In the case of S-polarization (E┴$\pi$) and P-polarization (E∥$\pi$) of a pump laser, the maximum absorption rate of the crystal was 82% at 809.4 nm and 98% at 808.8 nm, and slope efficiencies for the output power of the Nd:YVO$_4$laser (1064 nm) were 43% and 52%, respectively. The maximum Nd:YYO$_4$laser output power of 516 mW was obtained from the P-polarization pump laser of 1000 mW. As a result of an intracavity frequency-doubling, slope efficiency for the output power of the Nd:YVO$_4$/KTP green laker (532nm) was 23% and the maximum output power of 205 mW with the beam quality (M$^2$) of 1.42 was obtained from the P-polarization pump laser of 1000 mW.

• Analytical Science and Technology
• /
• 제13권5호
• /
• pp.584-591
• /
• 2000

The separation of Nd from the simulated $U_3Si/Al$ spent fuel solution with sequential two-step anion exchange separation has been studied. To prepare the simulated $U_3Si/Al$ spent nuclear fuel, unirradiated $U_3Si/Al$ whose composition consists of small $U_3Si$ particle dispersed in an Al matrix with Al cladding was dissolved with a mixture of 4 M HCl and 10 M $HNO_3$ and 8 or 15 fission product elements were added to the dissolved solution. The trace amount of silica in the solutions was removed by evaporating to dryness with HF and the U was adsorbed on the first anion exchange resin. Neodymium can be purely isolated from the fission product elements with a methanol-nitric acid eluent using the second anion exchange resin. A large excess of Al didn't influence on the elution velocity of Nd, but reduced the eluted contents of Nd, Al, Eu, Gd, Sm and Sr, A large amount of Al was removed first from the column with 3 mL of loading solution (0.8 M $HNO_3$/99.8% MeOH) before Nd elution by the eluent [0.04 M $HNO_3$-99.8% MeOH(1:9)]. The recovery of Nd was more than 94%, regardless of Al contents. Taking the 9 to 13 mL fraction of eluate was effective to purely isolate Nd.