• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.85-93
• /
• 1992

The only hardness of 2nd phase of martensite in dual phase steel which was composed of the martensite and ferrite was changed. Fatigue test was conducted by cantilever type of self-made rotated bending fatigue testing machine. The corrosion fatigue fracture behaviors of dual phase steel were investigated in 3% NaCl solution at $N_f$ = $1.5\times$$10^5$ $N_f$=1.0 $\times$ $10^6$ cycles. The fatigue strength was increased with increasing the hardness of 2nd phase. The size and number of corrsion pits were influenced by the 2nd phase hardness and pits remain constant in size just after they were transited into cracks. The life of crack initiation was effected by stress level. The shape of relation of $\Delta$K and da/dn has smaller scattering in it in 3% NaCl solution than that in air. The higher the 2nd phase hardness is, the higher the corrosion fatigue life becomes. Corrosion fatigue fracture behavior was effected by mechanics in case of $N_f$=1.5$\times$10$^5$$N_f$=1.5$\times$10$^6$ cycles.

• Asian Journal of Turfgrass Science
• /
• v.19 no.1
• /
• pp.17-25
• /
• 2005

Pathogenicity of entomopathogenic nematde, Steinernema carpocapsae Pocheon strain (ScP) was evaluated against different larval stages(2nd, 3-4th and 5th) of Anomis commode and Anomis mesogona(Lepidoptera: Noctuidae) in petri dish and pot. The $LC_{50}$ values were increased in proportion to larval stage of A. commoda and A. mesogona. $LC_{50}$ value of ScP against 2nd instar of A. commoda and A. mesogona was 9.7 and 4.5, respectively. The 2nd instar of both species was also susceptible to ScP in pot test. That is, mortality of 2nd instar of A. commode and A. mesogona was higher representing $72.5\%\;and\;87.5\%$ 5 days later after treatment, respectively, when ScP was applied at the ,ate of 90,000 infective juveniles(Ijs) per $pot(=1\times10^9\;Ijs/ha)$. However, susceptibility was decreased from 3rd instar. Mortality of 5th instar of A. commoda and A. mesogona was $5.0\%\;and\;10.0\%$, respectively, at the rate of 90,000 Ijs/pot. When ScP was applied into pot including mixed larval stages from 2nd to 5th instar(10 larvae far 2nd instar, 10 larvae for 3rd - 4th instars, and 10 larvae for 5th instar) at the rate of 90,000 Ijs/pot, mortality of A. commoda and A. mesogona was $69.2\%\;and\;50.0\%$, respectively.

• Journal of Food Hygiene and Safety
• /
• v.2 no.3
• /
• pp.121-136
• /
• 1987

As a part of continuing monitoring program since 1983, a study on pesticide residues on Korean agricultural products has been conducted to offer the tolerance of pesticide residues suiting Korean reality. The samples used in this experiment were collected from four areas in five provinces of Korea. The residue, levels of organochlorine pesticide (two kinds), organophosphoric pesticide (eight kinds) and carbamate pesticide (three kinds) on lettuce, garland chrysanthemum, radish Korean, potato, egg plant, green onion, persimmon and sweet potato, and the residue levels of captan and captafol on tomato, green pepper fresh, apple, peach, soybean, cucumber and cabbage Korean were determined by GC-NPD and ECD.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.4
• /
• pp.181-190
• /
• 2001

This study was conducted to investigate the effect of swine liquid manure(SLM) and phosphorus fertilizer from September, 1998 to July, 1999 on the soil fertility on Italian ryegrass field, Cheju volcanic ash soil. pH(lst investigated), Mg (2nd investigated) and Cu content (2nd investigated) on soil grown by Italian ryegrass were significantly increased by an increase of fertilizer P(P

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.432-439
• /
• 2012

Purpose: The aim of this study was to investigate the blood supply to the maxillary sinus in Koreans using computed tomography of the lateral wall of the sinus, and to analyze the data according to demographic data, and to compare our results with previously published research. Methods: One hundred and three patients (males 51, females 52) who visited the dental clinic were evaluated. We investigated the canals with cone-beam computed tomography, and measured the diameter and length from the bony notch of the vascular canal at the lateral wall of the sinus to each of the reference planes. Results: Most types of vascular canal were type I & II (total 72.2%) which were driving through inside the sinus wall. Type IV, V were frequently investigated in 1st premolar and 2nd molar. Mean height; from anterior nasal spine-posterior nasal spine plane to vascular canal was 5.56 mm in 1st premolar, 2.11 mm in 2nd premolar, 0.98 mm in 1st molar, 4.32 mm in 2nd molar; from the basal layer of the sinus was 4.93 mm in 1st premolar, 5.00 mm in 2nd premolar, 6.05 mm in 1st molar, 7.91 mm in 2nd molar; and from alveolar crest, 20.80 mm in 1st premolar, 16.57 mm in 2nd premolar, 14.01 mm in 1st molar, 16.17 mm in 2nd molar. The mean height of the vascular canal of each reference plane showed no significant difference between sex, site (left or right) and age. The mean diameters of the canals were 1.76 mm in male, and 1.50 mm in female. Diameter decreased with age, and tooth site (from 1st premolar to 2nd molar). Conclusion: These results show that the mean diameter of the vascular canal of the maxillary sinus varies according to age, sex, and tooth site, but that the mean height of canal had no significant difference based on these three factors.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.775-782
• /
• 1998

This experiment is third study concerning BaO-{{{{ { { Pr}_{ 2} O}_{3 } }}-{{{{ { TiO}_{2 } }} (Ln=Sm, Nd, Pr, La..) system which is known to show a high dielectric constant and Q value in microwave dielectric materials. The process of cry-stallization and the microwave dielectric properties of the specimens sintered at 1220-140$0^{\circ}C$ for 2 hr was investigated in the BaO-(Na,{{{{ { { Pr})_{2 }O }_{3 } }}-{{{{ { TiO}_{2 } }} as well as BaO-{{{{ { { Pr}_{ 2} O}_{3 } }}-{{{{ { TiO}_{2 } }} system. The single phase BaPr2Ti5O14 and Ba(Nd,{{{{ { { Pr})_{2 }O }_{3 } }}Ti5O14 was finally formed from the Pr2Ti2O7 (Nd, Pr)2Ti2O7 as a secondary phase in the BaO-{{{{ { { Pr}_{ 2} O}_{3 } }}-{{{{ { TiO}_{2 } }} and BaO-(Nd, {{{{ { { Pr})_{2 }O }_{3 } }}-{{{{ { TiO}_{2 } }} system respectively The dielectric constant of the specimens sint-ered at 1280~131$0^{\circ}C$ showed the maximum value as 105(BaO-{{{{ { { Pr}_{ 2} O}_{3 } }}-{{{{ { TiO}_{2 } }} system) and 88 (BaO-(Nd,{{{{ { { Pr})_{2 }O }_{3 } }}-{{{{ { TiO}_{2 } }} system) and the Q values of them showed higher value than 1800 which are due to the maximum den-sity. However the dielectric properties of the specimens sintered at higher temperature than 131$0^{\circ}C$ were reduced due to the increases of pore which were resulted from the sudden grain growth.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.55-61
• /
• 2013

In this study, eco efficiency analysis is performed to analyze Neodymium (Nd) containing permanent magnet recycling process. Life cycle assessment (LCA) and life cycle costing (LCC) are used to apply eco efficiency analysis. In the environmental aspects, global warming potential (GWP) of 1kg permanent magnet is 1.25E + 00 kg $CO_2$ eq. and abiotic resource depletion potential (ADP) is 1.10E - 02 Sb eq. This recycling process costs about 2130 KWR. Environmental efficiency of GWP is at 6.43 and ADP is at 5.32 when compared with vigin metal. Economic efficiency is at 6.74. This study confirms that Nd containing permanent magnet recycling process is sustainable system because of environmental and economical improvement.

• The Journal of the Petrological Society of Korea
• /
• v.1 no.2
• /
• pp.124-131
• /
• 1992

The Sm-Nd isotopic data on the Precambrian gneisses from Gyeonggi and Sobaegsan Massifs are presented and the crustal evolution of the Precambrian basements of the Korean Peninsula is discussed with that of the Precambrian basements of East Asia. Sm-Nd isochron plots on whole rock samples from Sobaegsan Massif give the following ages and initial Nd values. Biotite gneisses: $1.05{\pm}0.07$ Ga with ${\varepsilon}_{Nd}$ (1.05 Ga)= $-12.5{\pm}0.4$ ($2{\sigma}$); granitic gneisses: $1.70{\pm}0.59$ Ga with ${\varepsilon}_{Nd}$ (1.70 Ga)=$+9.5{\pm}6$($2{\sigma}$). Initial Nd isotopic evolution diagram for the Precambrian orthogneisses from Sobaegsan Massif with the Precambrian orthogneisses in northeastern China and Japan reveals the existence of early Archean depleted-mantle in east Asia and suggests the prevalence of nearly common or similar source accountable for these Precambrian gneisses. Such a common source is shown to have LREE-enriched feature and to have been formed from the depleted-mantle in the late Archean of ca. 2.6 Ga. On the other hand, the Sobaegsan granitic gneisses in Korea are concluded to have different evolution history. Our Sm-Nd study clearly discloses that some Precambrian orthogneisses from Korea had evolved from the protolith having the similar or same geochemical properties with the Precambrian orthogneisses in Japan and northeastern China. In addition, crustal formation age of Gyeonggi Massif in southern Korea may be different from that of Sobaegasn Massif.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.46-50
• /
• 2007

Blue phosphor calcium aluminate, $CaAl_2O_4:Eu^{2+}$ co-doped with $Nd^{3+}$ was prepared by solid state synthesis method. Phosphor materials with 1 mol% $Eu^{2+}$ and varying compositions of $Nd^{3+}$ show high brightness and long persistent luminescence. The synthesized phosphor materials were investigated by powder x-ray diffraction (XRD), SEM, TEM, photoluminescence excitation and emission studies. Broad band UV excited luminescence of the $CaAl_2O_4:Eu^{2+}:Nd^{3+}$ was observed in the blue region (${\lambda}_{max}=440\;nm$) due to transitions from the $4f^65d^1$ to the $4f^7$ configuration of the $Eu^{2+}$ ion. $Nd^{3+}$ ion doping in the phosphor results in long afterglow phosphorescence when the excitation light is cut off.

• The Journal of the Korean dental association
• /
• v.50 no.6
• /
• pp.329-338
• /
• 2012

Introduction: The purpose of this study is to evaluate the clinical results of vertical alveolar ridge augmentation using autogenous block bone graft, especially resorption rate, and outcomes of dental implants placed in the grafted site. Patients and Methods: Medical records and radiographs were reviewed. Twenty-seven patients who have been received the autogenous block bone graft which harvested from chin, ramus, and ilium, and the implant installation on 31 areas(22 maxillas and 9 mandibles) were included. Eight implants were installed simultaneously at the time of bone graft in 4 patients, and 65 implants were installed after 4.9 months(range 2~18 months) of autogenous block bone graft in 23 patients. The resorption amount and rate of augmented bone, and the success and survival rates implants were evaluated. Results: Mean height of the augmented block bone was $5.9{\pm}2.3mm$(range from 2.5 to 13.0 mm). Mean follow-up period after block bone graft was 30.4 months(range from 16 to 55 months). Mean resorption of the augmented block bone was $2.0{\pm}1.5mm$ (range from 0.5 to 7.24 mm). The success and survival rates of the implants were 78.1 % and 98.6%, respectively. Conclusion: This study indicates that the autogenous block bone graft is a useful and stable method for alveolar ridge augmentation for dental implant. And more augmentation is needed to compensate the resorption of the grafted bone.