• Journal of the Korean Magnetics Society
• /
• v.9 no.3
• /
• pp.154-158
• /
• 1999

Magnetic properties and microstructure of nanocrystalline $\alpha$-(Fe, Co)-based Nd-(Fe, Co)-B-Nb-Cu alloys have been investigated. $Nd_x(Fe_{0.9}Co_{0.1})_{90-x}B_6Nb_3Cu_1$(x=2, 3, 4, 5, 6) alloys prepared by rapid solidification process show amorphous phase except the one with x=2. By a proper annealing, the amorphous in the alloy is changed to a nanocrystalline phase. It is confirmed that the nanocrystalline alloys are composed of $\alpha$-(Fe, Co) and $Nd_2(Fe, Co)_{14}B_1$ phase. The optimally annealed $Nd_3(Fe_{0.9}Co_{0.1})_87B_6Nb_3Cu_1$ alloy shows the highest remanence of 1.55 T. The coercivity increases with the increase of Nd content The maximum coercivity of 4.6 kOe is obtained from an optimally annealed $Nd_6(Fe_{0.9}Co_{0.1})_84B_6Nb_3Cu_1$ alloy, resulting in the maximum energy product of 10.6 MGOe.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.5
• /
• pp.199-204
• /
• 2011

$(YSmNd)_{1.8}Ba_{2.4}Cu_{3.4}O_{7-x}$ [(YSN)1.8] high $T_c$ superconductor was directionally grown by zone melt growth process, in air atmosphere. In this study, optimum melting temperature and growth rate were $1100^{\circ}C$ and 3.5 mm/hr, respectively. The microstructure of well-textured (YSN)1.8 samples were examined by XRD, optical microscopy, TEM and SQUID magnetometer. The critical current density of these samples were measured by the direct transporting current method. In the observation using an optical microscopy, nonsuperconducting $(YSmNd)_2BaCuO_5$[(YSN)211] inclusions of (YSN)1.8 superconductor uniformly distributed within the superconducting (YSmNd)$Ba_2Cu_3O_x$[(YSN)123] matrix. The directionally melt-textured (YSN)1.8 superconductor showed an onset $T_c{\geq}90\;K$ and sharp superconducting transition. The transport $J_c$ values were 830 A and $3.93{\times}10^4$ (A/$cm^2$) at 77 K self-field, respectively.

• Resources Recycling
• /
• v.14 no.6 s.68
• /
• pp.10-15
• /
• 2005

In this study, the separation of samarium to neodymium with Karr column was investigated. Separation properties of Sm/Nd binary system was estimated with experimental parameters such as flow rate, initial pH of aqueous phase, saponification of PC88A in organic phase and agitation speed. The extraction rate and distribution coefficient increased with increasing initial pH of aqueous phase at 16.5 ml/min(retention time 10 minute) of flow rate of organic and aqueous phase, and equilibrium pH of aqueous phase after extraction was maintained at 1.5 by saponified PC88A. Also, the extraction rate and distribution coefficient were drastically increased with increasing saponification degree of PC88A and agitation speed, and optimal saponification degree was $40\%$. Extraction rate of Nd and Sm was $19.6\%$ and $72.5\%$ respectively at retention time 10 minute, initial pH 1, saponification degree $40\%$ and agitation speed 120 rpm.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.523-530
• /
• 2002

Repeatabilities and Correlations among Average Daily Gain, Backfat Thickness and Lean Percent in Swine The repeatability, correlation and rank correlation coefficients among average daily gain, backfat thickness and lean percent were estimated on the basis of records tested from August 1999 to February 2000 with 695 pigs of Duroc, Landrace and Yorkshire boars and gilts tested at 2nd Korea Swine Test Station located in Ha-dong, Kyeongnam Province. The effect of the sex, breed and month of measured were estimated by the least square method. The repeatabilities were estimated from the component of variance among repeated measurements of the trait for the same animal. The results obtained are summarized as follow ; 1. The means of the major economic traits studied were 142.1 days, 173.7 days and 182.5 days for age at 1st, 2nd and 3rd measure, 57.9%, 56.2% and 55.2% for lean percent at 1st, 2nd and 3rd measure, 1.33cm, 1.61cm and 1.63cm for backfat thickness at 1st, 2nd and 3rd measure, 946.6g, 879.2g and 879.4g for average daily gain at 1st, 2nd and 3rd measure, respectively. 2. The correlation coefficients between the backfat thicknesses measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.424, 0.700 and 1.424, respectively. The correlation coefficients between the lean percent measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.493, 0.619 and 0.471, respectively. The correlation coefficients between the average daily gain measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.716, 0.861 and 0.601, respectively. 3. The rank correlation coefficients between backfat thickness measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.438, 0.693 and 0.441, respectively. The rank correlation coefficients between lean percent measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.508, 0.593 and 0.478, respectively. The rank correlation coefficients between average daily gain measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.704, 0.834 and 0.571, respectively. 4. The estimated repeatabilities of the traits studied were 0.428 for the lean percent, 0.374 for the backfat thickness and 0.673 for the average daily gain, respectively.

• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.42-47
• /
• 2005

Nanocrystalline Nd-Fe-B powder was synthesized by a new thermochemical process that combined with past reduction-diffusion process and spray-dry process. In this process, Ca reduction process is vary important due to formation of hard magnetic$Nd_{2}Fe_{14}B$ phase from various oxides by Ca powder. Therefore, the final products are essentially affected a shape, size, and composition etc. of the Ca reduced powders. Ca reduction was performed to way that raw powders just mixed with Ca powder in proper ratio unlike to compress into compact. The powders after mixture-type Ca reduction mainly composited with $Nd_{2}Fe_{14}B$ phase even relativily low reaction temperature ($800^{\circ}C$) and all particle size of powder were distributed less than 1 ${\mu}m$ except for powder after Ca oxides as magnetic properties of powders after cake-type Ca reduction, with the consequence that high magnetic properties has been expected. The magnetic properties of powders prepared by mixture-type Ca ruduction, with the conseqence that high magnatic properties has been expected. The magnetic properties of powders prepared by mixture-type Ca reduction process showed $_iH_c$ = 5.9 kOe, $B_r$ = 5.5 kG, (BH)max = $Nd_{2}Fe_{14}B{\to}Nd_{2}Fe_{17}B$ decomposition by violent exothermic reaction during washing.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.73-86
• /
• 2004

The purpose of this study is the identification of (N-2-hydroxy-3-butenyl) valine(HBVal adduct) and (N-2,3,4-trihydroxy-butyl)valine(THBVal adduct)with mice inhalation exposure with 1,3-butadiene for 3 weeks($6\;hr/day\;{\times}\;5\;days/week$). Body weights were significantly lower from 4 or 9 exposure post-day in 1000 or 500ppm inhalation group than in control. The levels of HBVal adducts are 1.8, 3.7 and 6.2 pmol/mg globin in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 500 ppm 1,3-butadiene(BD), and 5.7, 7.4 and 16.0 pmol/mg globin in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 1000 ppm BD inhalation exposure. The levels of THBVal adducts are 32.0, 42.0 and 55.0 pmol/mg globin in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 500 ppm BD, and 67.8, 72.7 and 83.5 pmol/mg globin in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 1000 ppm BD inhalation exposure. Their ratios of THBVal and HBVal adducts are higher at earlier exposure and lower concentration. They are17.8, 11.4 and 8.87 in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 500 ppm BD, and 11.9, 9.8 and 5.2 in $1^{st}$, $2^{nd}$ , and $3^{rd}$ week for 1000 ppm BD inhalation exposure. In conclusion, THBVal and HBVal adducts are a important hemoglobin adduct for monitoring of BD exposure, and the latter is more biomarker than the other.

• Resources Recycling
• /
• v.13 no.6
• /
• pp.43-48
• /
• 2004

For the separation of neodymium from NdFeB permanent magnet scrap, the scrap was roasted for oxidizing, and leached with acetic acid followed by fractional crystallization for selective separation. From the analysis results of the leached solution, the optimum condition for the recovery of neodymium was found that leaching temperature, leaching time and pulp density are 80$^{\circ}C$, 3 hours, and 35%, respectively. At this optimum condition, more than 90% of neodymium could be recovered. Concentration of neodymium acetate in acetic acid. The optimum condition for the recovery of neodymium acetate crystal from the leached solution was that the initial leaching solution was evaporated until the remaining volume was about 1/5 of the initial volume. At this condition, 67.5% of neodymium was recovered from the leached solution. The neodymium remaining in the concentrated solution was recovered by reacting it with oxalic acid.

• Journal of the Korean Ceramic Society
• /
• v.30 no.3
• /
• pp.175-180
• /
• 1993

Influence of Nd3+ substitution for Pb2+ on the dielectric properties and the PbO evaporation according to substituting Nd3+ for Pb2+ in Pb(Mg1/3Nb2/3)O3 system ceramics have been investigated. The dielectric constant at the curie temperature and evaporation of PbO were decreased with increase of Nd3+ amounts. The percentage of PbO evaporation was 2.5wt% in the PMN system substituted Nd3+ for Pb2+, while it was 3.7wt% in the PMN system.

• Electrical & Electronic Materials
• /
• v.10 no.10
• /
• pp.995-999
• /
• 1997

For melt-spun Fe-Nd-C alloy variation of phase development and magnetic properties with the variety of small Al addition was investigated. As the amount of Al addition increased the amorphization of Fe$_{14}$/Nd$_{2}$/C or $\alpha$-Fe was retarded and the residual Fe$_{14}$/Nd$_{2}$/C or $\alpha$-Fe did not eliminated after heat treatment resulting in poor coercivities of the ribbons. The grain size of Fe$_{14}$/Nd$_{2}$/C increased with the increase of Al addition and the abnormal grain was often found out in the ribbon heat treated for more then 10 min. The enhancement of coercivity was the highest with the addition of 0.5at%Al. As the amount of Al addition increase the coercivities dropped rapidly. The highest coercivity obtained so far is 13.9kOe which about 16% higher than that(11.2kOe) obtained from the Al-free specimen.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.6
• /
• pp.923-928
• /
• 1997

The occurrence of butyltin compounds in the seawater and sediment of Masan Bay was investigated. The concentrations were in the range of $ND-0.059{\mu}g/\ell$ for tributyltin (TBT), $ND-0.091{\mu}g/\ell$ for dibutyltin (DBT) and $ND-0.720{\mu}g/\ell$ for monobutyltin (MBT) in the seawater, and $ND-0.233{\mu}g\;TBT/g.dry$, $ND-0.197{\mu}g-DBT/g.dry$ and $ND-0.684{\mu}g-MBT/g.dry$ in the sediment. Among the butyltin compounds, the major component in the seawater was MBT, while the predominant species in the sediment changed with time. The tributyltin concentrations in the sediment are approximately three orders of magnitude greater than the associated water column levels. Sediment/water partition coefficients (K) of TBT were between $0.6\times10^3\;and\;5.0\times10^3$.