• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.2
• /
• pp.137-145
• /
• 1993

The purpose of this study was to observe the effect on teeth and tibia bone histopathologically in rats by the richitogenic diet. For this purpose, 48 sprague-dewley rats, weighing 80g or more, divided into 6 groups, and sacrificed on the 1st, 2nd, 3rd, 4th, 5th, 6th weeks after experiments respectively. The tissues contain tooth, and tibial bone were fixed in 10% normal formalin solution, decalcified in Plank-Rychlo solution, embedded in paraffin, sectioned in $6-8{\mu}$ as usual manner, the tissues were stained in hematoxylin eosin, and examined hisopathologically. Follow results were attained 1. Pyknotic appearance of odontoblastic layer was noticed on the 1st week, and increased on the 2nd weeks, and it is appeared that degeneration and dearrangements of odontoblasts on the 4 weeks. But a little recovered on the 6th weeks. 2. The thickness of predentin layer was increased on the 2nd weeks, and increased remarkedly on the 3rd weeks and reached the maximum on the 5th weeks. 3. The interglobular dentin was appeared in spotty shape on the 2nd weeks, and increased on the 4th, 5th, weeks, and large amount of inter-globular dentin was appearanced on the 6th weeks. 4. It is appeared that enamel hypoplasia on the 4th weeks. 5. Epiphyseal and metaphyseal plate of tibia was increased from/on the 2nd weeks, increased maximumly on the 5th weeks. And pyknotic, dearrangements, and hyperchromatic appearances of chondrocytes on the plate were increased on the 1st week.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.140-145
• /
• 1997

Silkworm fed on mulgerry leaves with 1000 times diluted Insegar(main component : Fenoxycarb, ethyl-2-(4-phenoxyphenoxy)ethylcarbmate) and its effects was investigated on increase of the 5th larval silkgland weight and silk quality. The oral application of fenoxycarb showed increase of the silkgland weight. The whole period of the silkgland weight falls on the 2nd instar treatment by 13%, the 3rd day of the 4th instar by 111%(3100 mg) and the whole period of the 5th instar treatment rather decreased it by 66%(497 mg), as compared to 1470mg of the control. Female and male both increased 15%(1779mg) and 12%(1554mg) of the silkgland weight with the 2nd instar treatment, as compared to 1548mg and 1391mg in control, respectively. 118%(3368mg) and 104%(2832mg) of increase in the silkgland weight were also showed with the 3rd day of the 4th instar treatment but 70%(463mg) and 61%(539mg) of decrease were shown with the 5th instar treatment. The maximum weight of the middle silkgland weight increased by 6%(1248mg) and 127%(2673mg) with the 2nd instar and with the 3rd day of the 4th instar, respectively but 67%(393mg) of decrease took place, as compared to 1175mg of the control. The maximum increase of the posterior silkgland weight with whole peried of the 2nd instar treatment increased 12%(419mg) and 75%(656mg) and 64%(135mg) of decrease was shown, as compared to 374mg of the control. The oral application of Insegar at the 2nd instar increased 26 m of cocoon length, 4.0 cg of the cocoon filament weight and 0.21d of the silk denier, as compared to 1147 m of the cocoon length, 38 cg of the cocoon filament, 2.99d of the silk denier, weight of cocoon filament and silk denier, respectively but denier variance narrowed to 0.33d, as compared to that of the control.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.409-422
• /
• 1995

The purpose of this study was to investigate the effects of radiation on the formation of rat molar enamel at the developmental stage. The experimental animals were divided into five groups and were irradiated single dose of 396cGy ; 1 st group on 14th day of gestation, 2nd group on 19th day of gestation, 3rd group on 3 days after birth, 4th group on 8 days after birth, 5th group on 28 days after birth. The control and 1, 2, 3, and 4th experimental groups were sacrificed on 2, 4, and 6 weeks and the 5th groups were sacrificed on 1 day and 2 weeks after irradiation. Distal 1/2 and occlusal 1/3 enamel surface of lingual side of lingual cusp, and fractured surface of lingual side of lingual cusp in a longitudinal direction of the mandibular first molar were examined using scanning electron microscope. The following results were obtained. 1. The roughness of enamel surface and enamel hypoplasia were increased in a sequence of 4th, 1st, 2nd, and 3rd experimental group, and the enamel cracks were increased in the 1st and 2nd experimental group. 2. The pattern of enamel hypoplasia had a network form on the 1st and 2nd experimental group, and appeared a linear shape on the 3rd experimental group, and then the crator-like enamel defects were observed in all experimental groups (especially 1st and 2nd experimental group) except 5th. 3. Dentinoenamel junction showed the clear-cut and straight appearance except 5th experimental group. 4. There was no significant difference between 5th experimental and control group.

• Journal of Periodontal and Implant Science
• /
• v.23 no.3
• /
• pp.564-576
• /
• 1993

The purpose of this study was to evaluate the effects of Nd:YAG laser treatment on removal of smear layer and exposure of dentinal tubules. The experimental specimens were obtained from root planed surface of 30 human teeth which were extracted due to severe periodontal disease. The specimens were assigned randomly of three groups: root planed group, Tetracycline HCl(100mg/ml, 5min) group, and Nd:YAG laser ($Laser-35^{TM}$, U.S.A. 5 seconds )group. Nd:YAG laser group was divided into 4 subgroups according to 3.0W, 3.5W, 4.0W, 4.5W of power. The surface change of specimens were evaluated by scanning electron microscopy. The number of exposed dentinal tubules and percentage of area occupied by dentinal tubule orifices per unit area between each group was statistically analyzed by paired Student t-test. The results were as follows: 1. By root planing only, dentinal tubule was not exposed, but scale-like smear layer and parallel instrument tracks were resulted. 2. Tetracycline HCl treated surfaces exhibited the small number of partially exposed dentinal tubules with long orifices. The number($3.80{\pm}0.79$) of exposed dentinal tubules on Tetracycline HCl group was significantly less than that in laser groups above 3.5W of power(P<0.001), and the percentage ($0.68{\pm}0.19$) of area occufied by dentinal tubule orifices per unit area($192\;{\mu}m^2$) was significantly lower than that of any laser group(P<0.001). 3. The laser group irradiated with 4.5W of power showed both the most number($10.60{\pm}0.97$) of exposed dentinal tubules among the experimental groups, and the highest percentage($3.75{\pm}0.55\;%$) of area occupied by dentinal tubule orifices. 4. Energy Surge during laser pulsing and overlapping passes of the fiber resulted in melted and resolidified surface textures with lava-like appearance.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.292-297
• /
• 2003

A diode-pumped single-mode Nd:YV $O_4$ green laser was developed. Frequency doubling of the laser was achieved by using an intracavity KTP generated green beam (532 nm). By comparing the diode laser spectrum with absorption spectrum of the Nd:YV $O_4$ crystal, we found optimal operating temperature of the diode laser. From output power measured for various mirror curvatures and cavity lengths, we found the optimal matching of TE $M_{00}$ mode with the pump beam gives the best efficiency. When the pump power was 1.9 W, 80 ㎽ of TE $M_{00}$ mode green beam was obtained. We tried to get a single longitudinal mode lasing as the fluctuation of the laser power was caused by the shift of longitudinal modes and the beating between the modes. We tested the intracavity etalon method and birefringent filter method for single mode operation. The etalon method resulted in the best single mode output power of 60 ㎽. The power fluctuation of the single-mode laser was reduced to 1/10 of that of the multi-mode laser.

• Korean Journal of Poultry Science
• /
• v.8 no.1
• /
• pp.15-24
• /
• 1981

A study was conducted to determine whether the vaccination programs for the control of New castle disease (ND) would affect the immune status of birds against the disease. Twenty-six poultry flocks in the epizootic area of ND were surveyed to investigate the level of urn antibody against ND virus and the programs used for the vaccination of birds. The mortality rates and vaccination status of birds during the epizootic of ND were also examined in the infected poultry flocks to elucidate the immune effect against the epizootic with particular regard to various vaccination programs used in the field. The results obtained are summerized as follows: 1. Of 26 poultry flocks investigated, 22 flocks were immunized with live and killed vaccines, their haemagglutination-inhibition (HI) antibody titer being 146 and 50, respectively. Among 22 farms using live and killed vaccines two flocks which showed the lowest HI titer of 10 and 23 had the disease later on. However, no cases of ND were recorded in the killed vaccine groups, although their HI titers were in the range of 38 to 64. 2. Of 14 infected flecks, one flock was not vaccmated against ND while all the remaining 13 flocks were vaccinated against the disease, of which 8 flocks were vaccinated with live vaccine only and the other 5 flocks with both live and killed vaccines. The mortality rate of 8 infected flocks which had been vaccinated with only live vaccine was as high as 32.5% while that of 5 flocks with both live and killed vaccines was as low as 5.1%. 3. It was found that in majority of flocks B$_1$vaccine was used via drinking water and in a few flocks the vaccine was administered via intramuscular route or method of dipping mouth, nose and eye of birds into vaccine solution.

• The Journal of the Korean dental association
• /
• v.50 no.6
• /
• pp.329-338
• /
• 2012

Introduction: The purpose of this study is to evaluate the clinical results of vertical alveolar ridge augmentation using autogenous block bone graft, especially resorption rate, and outcomes of dental implants placed in the grafted site. Patients and Methods: Medical records and radiographs were reviewed. Twenty-seven patients who have been received the autogenous block bone graft which harvested from chin, ramus, and ilium, and the implant installation on 31 areas(22 maxillas and 9 mandibles) were included. Eight implants were installed simultaneously at the time of bone graft in 4 patients, and 65 implants were installed after 4.9 months(range 2~18 months) of autogenous block bone graft in 23 patients. The resorption amount and rate of augmented bone, and the success and survival rates implants were evaluated. Results: Mean height of the augmented block bone was $5.9{\pm}2.3mm$(range from 2.5 to 13.0 mm). Mean follow-up period after block bone graft was 30.4 months(range from 16 to 55 months). Mean resorption of the augmented block bone was $2.0{\pm}1.5mm$ (range from 0.5 to 7.24 mm). The success and survival rates of the implants were 78.1 % and 98.6%, respectively. Conclusion: This study indicates that the autogenous block bone graft is a useful and stable method for alveolar ridge augmentation for dental implant. And more augmentation is needed to compensate the resorption of the grafted bone.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1011-1013
• /
• 2003

대개의 Nd형 레이저 광소자는 $^4F_{5/2}$의 준위로 펌핑하여 양자효율이 떨어지며, 소모적 열의 발생으로 마이크로칩 레이저의 높은 펌핑 밀도에 의한 열발생을 유도한다. 그러나 $^4F_{5/2}$ 준위로의 직접 펌핑은 소모적 열발생을 획기적으로 줄일 뿐 아니라 이로 인한 레이저 발진 효율의 증가를 가능하게 하였다. Nd:LSB 마이크로칩 레이저의 경우 공진기 구성에 따라 6-11%의 기울기 효율이 상승하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.196-199
• /
• 2000

Since the reports of CMR(colossal magnetoresistance) effects in some single crystal R-P phase $La_{1+x}Sr_{2-x}Mn_2O_7$, considerable researches have been carried out to find optimum composition and to understand the role of dimensionality in the CMR mechanism of this system. In this study, layered perovskite $Ln_xCa_{1-x}MnO_{4}$ (x=0.5, Ln=Pr, Nd, Sm, Gd) phases were synthesized by solid state reaction and their structures were refined by Rietveld method. Electrical and magnetic properties were measured between room temperature and liquid helium temperature and compared with those of two dimensional $La_{1.4}Sr_{1.6}Mn_2O_7$ phase.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.4
• /
• pp.191-206
• /
• 2011

The emplacement ages, whole-rock geochemistry and Sr-Nd isotopic compositions of granitoid rocks from Cheongju area, South Korea, were investigated for delineating their petrogenetic link to the Jurassic Daebo granitoid rocks. Zircon crystals were collected from the diorite, biotite granite and acidic dyke samples in a single outcrop. Cross-cutting relationships show that the emplacement of diorite was postdated by the intrusion of biotite granite. Both rocks have been subsequently intruded by acidic dyke. The U-Pb isotopic compositions of zircon from the diorite, biotite granite, and acidic dyke were measured using a SHRIMP-II ion microprobe, yielding the crystallization ages of $174{\pm}2Ma$, $170{\pm}2Ma$, and $170{\pm}5Ma$, respectively, with 95% confidence limits ($t{\sigma}$). The emplacement ages are consistent with those determined from the above relative ages. The major and trace element patterns of the rocks are consistent with those of the Jurassic Daebo granitoid rocks, possibly suggesting a subduction-related I-type granite. The geochemical signature is, however, betrayed by the Sr and Nd isotopic compositions of these rocks. The isotopic signatures suggest that the rocks were produced either by the partial melting of lower-crust or by the mantle-derived magma contaminated by the basement rocks during its ascent and/or emplacement. In addition, the inherited ages of zircons of the rocks (ca. 2.1, 1.8, 0.8 and 0.4 Ga) suggest a possible assimilation with crustal rocks from the Gyeonggi massif and Ogcheon metamorphic belt.