• 한국자기학회지
• /
• 제6권2호
• /
• pp.80-85
• /
• 1996

$Nd_{2}Fe_{14}B/Fe_{3}B$ 복합자성상을 근간으로 한 급냉제조된 합금을 외부 자장중에서 열처리를 함으로써 자기특성이 월등하게 좋아짐을 확인하였다. $Nd_{4}Fe_{73.5}Co_{3}(Hf_{1-x}-Ga_{x})B_{18.5}$ 조성 합금을 1~5 kOe 자장중에서 열처리함으로써 연자성의 기지상$(Fe_{3}B)$ 및 강자성상$(Nd_{2}Fe_{14}B)$의 결정입도가 20% 감소하였고, 그 결과 잔류자속밀도 $(B_{r})$ 및 최대자기에너지적, ${(B.H)}_{max}$가 30% 이상 증가하였다. 이러한 증가는 입도의 감소 뿐만 아니라 미세입도의 고른 분포에도 기인한 것으로 판단되었다. 보자력의 극대점은 잔류자속밀도와는 달리 특정결정입도에서 발생하며, 이러한 기구를 교환상호작용변수 와 연관하여 설명한다. $Nd_{4}Fe_{73.5}Co_{3}Hf_{0.5}Ga_{0.5}B_{18.5}$ 합금을 자장중 열처리한 결과 ${(B.H)}_{max}=15.8$ MGOe의 고에너지적을 얻을 수 있음을 확인하였다.

• International Journal of Oral Biology
• /
• 제36권4호
• /
• pp.195-201
• /
• 2011

Matrix metalloproteinases (MMPs) have been implicated in tissue development and re-modeling. Dynamic morphological changes of tooth germs reflect involvement of these enzymes during odontogenesis. The present study was performed to investigate expression and localization of MMP-2 and MMP-9, which have been known to have type IV collagenase activities, in rat tooth germs at different developmental stages. MMP-2 expression was increased gradually in the tooth germs from cap to crown staged germs at both transcription and translation levels. The localization of this molecule was detected in secretory ameloblasts and preameloblasts. The strong immunoreactivities were occasionally seen along the basement membrane between ameloblasts (or preameloblasts) and odontoblasts (preodontoblasts). However, weak reactivity was detected in odontoblasts and reduced enamel epithelium. The level of MMP-9 expression in the tooth germs was higher in cap stage than in crown staged germs at both transcription and translation levels. They were strongly expressed in both ameloblasts and odontoblasts. Even though reduced enamel epithelium after enamel formation and inner enamel epithelium at the cap stage exhibited weak reactivity, strong reactivity was detected in dental follicles and perifollicular tissues surrounding cap staged germs. These results suggested that MMP-2 may involve degradation of the basement membrane during hard tissue formation, whereas MMP-9 might be involved in remodeling of follicular tissues.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2427-2434
• /
• 2022

Series of unequal quantity Nd/Ce co-doped ceramic nuclear waste forms, (Gd, Nd)₂(Zr, Ce)₂O₇, were prepared to tailor its ordered pyrochlore or disordered fluorite structure. The phase transition, microtopography, and elemental composition of the ceramic samples were systematically investigated, especially the effect of order-disorder structure on the chemical stability. It was confirmed that unequal quantity of Nd/Ce could synchronously replace the Gd/Zr-sites of Gd₂Zr₂O₇. And the phase transition of order-disorder structure could be successfully tailored by regulating the average cationic radius ratio of (Gd, Nd)₂(Zr, Ce)₂O₇ series. The elements of Gd, Nd, Zr, and Ce are uniformly distributed in the ordered or disordered structures. The MCC-1 leaching results showed that (Gd, Nd)₂(Zr, Ce)₂O₇ pyrochlore ceramic nuclear waste forms had excellent chemical stability, whose elements' normalized leaching rates were as low as 10^-4-10^-7 g·m^-2·d^-1 after 7 days. In particular, the chemical stability of disordered structure was superior to that of ordered structure. It was proposed that the force constant and the closest packing were changed with the structure transformation resulting the chemical stability difference.

• Journal of Oral Medicine and Pain
• /
• 제25권1호
• /
• pp.129-144
• /
• 2000

The purpose of this study was to examine dentin surface changes of extracted sound third molar specimens which were etched with 10% maleic acid and irradiated at $7-140J/cm^2$ with $CO_2$ and at $156-280J/cm^2$ with Nd:YAG laser. The results were as follows. 1. Dentin surfaces etched with 10% maleic acid and then irradiated at below of $42J/cm^2$ with $CO_2$ laser showed the retentive morphology for resin restoration. 2. Dentin surfaces irradiated at below of $42J/cm^2$ with $CO_2$ laser showed the increased acid-resistance. 3. Dentin surfaces irradiated at $218-280J/cm^2$ with Nd:YAG laser showed the retentive morphology. 4. Dentin surfaces irradiated at $218-280J/cm^2$ with Nd:YAG laser and etched 10% maleic acid and then $218-280J/cm^2$ with Nd:YAG laser showed the increased acid-resistance.

• 대한구순구개열학회:학술대회논문집
• /
• 대한구순구개열학회 1998년도 종합학술대회
• /
• pp.36-36
• /
• 1998

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2006년도 제46회 종합학술대회 연제초록
• /
• pp.128-128
• /
• 2006

• 대한치주과학회:학술대회논문집
• /
• 대한치주과학회 2006년도 제46회 종합학술대회 연제초록
• /
• pp.129-129
• /
• 2006

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.546-547
• /
• 2005

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.54.3-54
• /
• 2001

This paper presents a controller design technique for standard 2nd-order system satisfying user-specified phase margin. A simple method is presented to meet stability margin for the 2nd-order system, which is important since the 2nd-order plant models are frequently encountered in the practical plant models such as actuators of the optical drive systems. Through the comparison of the specified stability margin and achieved stability margin, it is shown in the simple example that the proposed technique is useful in the initial design of control systems with stability margin specifications.

• 정보화연구
• /
• 제9권4호
• /
• pp.465-476
• /
• 2012

최근 대 중 소 기업간 동반성장이 이슈인 가운데 특히 사각지대에 있는 2 3차 협력기업과 의 동반성장 네트워크의 중요성이 커지고 있다. 본 논문에서는 2 3차 협력기업에 대한 설문조사와 더불어 국내 대기업들의 이들과의 동반성장 정책에 대한 조사를 통해 전반적 2 3차 협력기업에 대한 현황을 제시한다. 아울러, 미국, 독일을 비롯한 해외 선진국에서 이뤄지는 동반성장 정책을 고찰, 시사점을 도출, 정부 및 대기업을 포함한 위탁기업들의 2 3차 협력기업과의 동반성장 네트워크를 구축하기 위한 정책적 제언을 한다.