• 한국재료학회지
• /
• 제10권9호
• /
• pp.629-635
• /
• 2000

본 논문에서는 Ti-48.5at%Al-0.96at%Mo 조성을 갖는 $\gamma$-TiAl 합금은 항온 단조 및 후속 조직제어 열처리 시 발달하는 집합조직의 변화에 관해 연구하였다. 특히, 동적 재결정 후 조직제어 열처리 온도와 시간의 증가에 따라 발생하는 lamellar volume fraction 과 집합조직 변화에 주목하여 관찰하였다. 동적 재결정 후 집합조직은 ND$\perp${302) 선분과, TD$\perp${100) 및 이에 비해 상대적으로 다소 약한{111) 성분들이 발달하였으며, 열처리 온도와 시간이 증가함에 따라 lameller volume fraction 은 증가했고 동일한 성분의 집합조직도 점차 강하게 발달함을 알 수 있었다. 하지만 상온인장시험 결과는 lameller volume fraction이 증가할수록 낮은 상온 연신을 보였는데, 이는 준 층상조직을 갖는 $\gamma$-TiAl합금의 상온인장특성이 집합조직의 영향보다는 lameller volume fractio과 같은 미세조직 특성에 더욱 강하게 영향을 받기 때문인 것으로 판단된다.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1049-1054
• /
• 1999

근사단결정 다이아몬드막 성장시 입자의 정렬을 개선하기 위한 집합조직성장의 2단계 성장방법을 제안하였다. 메탄조성 4%, 기판온도 $850^{\circ}C$ 조건에서 (100) Si 기판에 - 200V 바이어스를 인가하여 20분동안 전처리 하였다. 처리한 기판을 2%[CH$_4$], 기판온도 $810^{\circ}C$에서 2~35시간동안 <100> 집합조직을 지니도록 1단계로 성장시켰다. 이 시편의 성장표면을 평탄화하기 위하여 (100) 면이 성장하도록 2% [CH$_4$], 기판온도 $850^{\circ}C$ 조건에서 2단계 성장시켰다. 1단계 성장시간에 따른 다이아몬드막의 배열정도를 {111} X-ray pole figure의 반가폭 변화를 통해 관찰하였다. 1단계 성장 후 입자정렬은 막의 두께가 증가할수록 개선되었다. 그러나 <100> 집합조직의 표면조직은 피라미드 형태의 굴곡을 피할 수 없었다. 2단계 성장시 (100) 면의 성장으로 인해 막의 표면은 평탄화되었으며, 이때 입자의 정렬은 1단계 성장시간에 크게 의존하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.111-111
• /
• 2022

According to data from the Ministry of Environment, food waste accounted for 27% of the nation5 s household waste in 2020, and 4.67 million tons of food waste is being discharged per year. According to the Food Waste Direct Landfill Prohibition Act, food waste must be incinerated, composted, fodder, and decomposed before landfilling. The cost of incineration and landfilling of food waste is considerable. Therefore, through the process of turning food waste into fertilizer, we are going to investigate the limit of crop application and the change in the growth of crops during continuous use of food waste fertilizer. This study investigated the growth of lettuce such as shoot length, root length, leaf number, fresh weight, and dry weight after treating lettuce with food waste dry powder mixed fertilizer. The experiment was carried out continuously in 2021 (1st year) and 2022 (2nd year), and the treatment groups were set to No Treatment (NT), Chemical Fertilizer (CF), Mixed Fertilizer (MF×1), and Mixed Fertilizer×2 (MF×2), was repeated 3 times. As a result of the 1st year growth survey, there was no significant difference between NT and CF in the case of shoot length, but MF×1 and MF×2 were significantly decreased compared to NT. Root length was not significantly different in all treatment groups. As for the leaf number, there was no significant difference between NT and MF×1, but CF and MF×2 were significantly decreased compared to NT. In fresh weight, MF×1 and MF×2 were significantly decreased compared to NT, and in the case of dry weight, there was no significant difference between NT, MF×1, and MF×2. As a result of the 2nd year growth survey, there was a significant difference in CF and MF×2 in leaf number, but there was no significant difference in all treatment groups with respect to shoot length, root length, fresh weight, and dry weight. Through continuous additional research, it is necessary to confirm the change in soil composition and the growth of crops due to food waste fertilizer treatment.

• Journal of Periodontal and Implant Science
• /
• 제33권1호
• /
• pp.103-111
• /
• 2003

Tooth mobility is an important part of a periodontal examination and represents a function of the persisting height of the alveolar bone and the width of the periodontal ligament. The purpose of this study was to evaluate the changes of the tooth mobility over 4 week-period following surgical therapy on the periodontal disease. Thirty five patients presenting with moderate periodontal pockets were selected and tooth mobility was measured at weekly intervals using Periotest (Siemens Co., Germany) beginning at the pre-operation examination and ending four weeks following the modified Widman Flap. All data were statistically analyzed using the one-way ANOVA test. The results were obtained as follows; 1. All teeth exhibited the greatest change in mobility at 1 week post-op, mobility generally decreasing with time. 2. Comparison of the weekly tooth mobility data regarding the 1st premolars showed significant differences only between weeks 1 (9.94) and 4 (6.14) (p<0.05). 3. Comparison of the weekly tooth mobility data regarding the 1st molar showed significant changes in the intervals between pre-op (6.49) and week 1 (11.22), pre-op and week 2 (9.37), weeks 1 and 3 (7.65), weeks 1 and 4 (5.62), and weeks 2 and 4 (p<0.05). 4. Comparison of the weekly tooth mobility data regarding the 2nd premolar and 2nd molar showed significant differences between pre-op (6.91, 8.60) and week 1 (11.02, 12.62), weeks 1 and 3 (8.00, 8.05), weeks 3 ad 4 (6.22, 6.71), and weeks 2 (9.34, 11.01) and 4 (p<0.05).

• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.151-160
• /
• 1984

This study was designed to get the informations of the mesiodistal axial inclinations of the posterior teeth and of the relationships between these and other angular measurements of facial bony structures in normal occlusion and malocclusion groups using lateral roentgenocephalograms. The subjects consisted of 73 normal occlusions (31 males 42 females), 38 Class II Division 1 malocclusions (17 males 21 females) and 47 Class III malocclusions (19 males 28 females). The findings of this study are as follows : 1. In mandible, the posterior teeth axes of Class II Division 1 malocclusion group were inclined more mesially and those of Class III malocclusion group were inclined more distally than normal occlusion group. In maxilla, Class II Division 1 malocclusion group showed more distal inclination and Class III malocclusion group showed more mesial inclinaton of 1st, 2nd premolars and more distal inclination of 1st, 2nd molars than those of the normal occlusion group. 2. There was a tendency for teeth axes to maintain nearly the same inclination in relation to occlusal plane irrespective of various OMA and OPA in each group. 3. F M A, P M A and O P A were the largest in Class II Division 1 malocclusion group and O M A, GoA were the largest in Class 111 malocclusion group. 4. There were high correlationships between mandibular teeth inclinations related to mandibular plane and 4 angular measurements except OPA, and between maxillary teeth inclinations related to palatal plane and OPA.

• 농업과학연구
• /
• 제44권2호
• /
• pp.254-260
• /
• 2017

The primary goals of this research were to evaluate the impact of diet supplemented with 25-hydroxyvitamin $D_3$ ($Hy{\cdot}D(R)$) on sow's body condition and reproduction performance. A total of sixteen multiparous sows [(Landrace ${\times}$ Yorkshire), average parity = $3.79{\pm}0.32$] and their litters were randomly allotted to 2 treatments to give 8 replicates per treatment. Diet treatments were randomized to receive a non-active (ND) or active 25-hydroxyvitamin $D_3$ (AD) diet (0.36 mg cholecalciferol/g) during pregnancy. The results of this experiment were observed at the gestation of d 58 - 75, d 76 - 95, d 96 - 110, and d 111 - 115. A corn-soybean meal-based diet was formulated to meet or exceed the nutrient requirements recommended by NRC (2012). Results indicated that the sows' farrowing duration was shortened (4.71, 5.38 h), and the average number of mummified fetuses decreased significantly (p < 0.05) in AD treatment compared with ND treatment (0.1, 0.5) while birth weight was significantly (p < 0.05) improved (1.44, 1.18 kg). There were no significant effects on body weight, backfat thickness, and fecal score during the gestation of sows in different phases (p > 0.05). And the total birth, stillbirth, live birth, and survival rates of the litter did not change (p > 0.05). The results of this study suggest that the farrowing duration of sow pigs will be shortened and the number of mummies will be decreased while their litters' body weight may be improved, if fed active 25-hydroxyvitamin $D_3$ (0.36 mg/g) during pregnancy phase.

• 한국재료학회지
• /
• 제21권10호
• /
• pp.556-562
• /
• 2011

We carried out this study to evaluate the grain refining in and the mechanical properties of alloys that undergo severe plastic deformation (SPD). Conventional rolling (CR) and cross-roll rolling (CRR) as SPD methods were used with Ni-20Cr alloy as the experimental material. The materials were cold rolled to a thickness reduction of 90% and subsequently annealed at $700^{\circ}C$ for 30 min to obtain a fully recrystallized microstructure. For the annealed materials after the cold rolling, electron back-scattered diffraction (EBSD) analysis was carried out to investigate the grain boundary characteristic distributions (GBCDs). The CRR process was more effective when used to develop the grain refinement relative to the CR process; as a result, the grain size was refined from $70{\mu}m$ in the initial material to $4.2{\mu}m$ (CR) and $2.4{\mu}m$ (CRR). These grain refinements have a direct effect on improving the mechanical properties; in this case, the microhardness, yield and tensile strength showed significant increases compared to the initial material. In particular, the CRR-processed material showed more effective values relative to the CR-processed materials. The different texture distributions in the CR (001//ND) and CRR (111//ND) were likely the cause of the increase in the mechanical properties. These findings suggest that CRR can result in materials with a smaller grain size, improved texture development and improved mechanical properties after recrystallization by a subsequent annealing process.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.65-74
• /
• 2009

Device quality indium tin oxide (ITO) films are deposited on glass substrates and ultra-thin diamond-like carbon films are deposited as a buffer layer on ITO by a pulsed Nd:YAG laser at 355 nm and 532 nm wavelength. ITO films deposited at room temperature are largely amorphous although their optical transmittances in the visible range are > 90%. The resistivity of their amorphous ITO films is too high to enable an efficient organic light-emitting device (OLED), in contrast to that deposited by a KrF laser. Substrate heating at $200^{\circ}C$ with laser wavelength of 355 nm, the ITO film resistivity decreases by almost an order of magnitude to $2{\times}10^{-4}\;{\Omega}\;cm$ while its optical transmittance is maintained at > 90%. The thermally induced crystallization of ITO has a preferred <111> directional orientation texture which largely accounts for the lowering of film resistivity. The background gas and deposition distance, that between the ITO target and the glass substrate, influence the thin-film microstructures. The optical and electrical properties are compared to published results using other nanosecond lasers and other fluence, as well as the use of ultra fast lasers. Molecularly doped, single-layer OLEDs of ITO/(PVK+TPD+$Alq_3$)/Al which are fabricated using pulsed-laser deposited ITO samples are compared to those fabricated using the commercial ITO. Effects such as surface texture and roughness of ITO and the insertion of DLC as a buffer layer into ITO/DLC/(PVK+TPD+$Alq_3$)/Al devices are investigated. The effects of DLC-on-ITO on OLED improvement such as better turn-on voltage and brightness are explained by a possible reduction of energy barrier to the hole injection from ITO into the light-emitting layer.

• 한국의류학회지
• /
• 제43권1호
• /
• pp.95-111
• /
• 2019

This study is the 2nd report following "A Study on the Characteristics of Material in the Korean Up-cycling Fashion Brands (Part I)" that handled the development of upcycling props using the characteristics of upcycling material. The 2nd report analyzed product types and materials focusing on 21 foreign upcycling fashion brands. It analyzed the characteristics of upcycling fashion materials using the case analysis of coffee bean bag and waste denim based on external characteristics and internal characteristics. We then classified the external characteristics into environment/economic feasibility and availability/mixture and the internal characteristics into historicality/story and originality/scarcity. Five bags were designed and produced for the actual commercialization of fashion products based on such characteristics of materials, with the use of coffee bean bags and waste denim as upcycling materials. This study is differentiated from existing research by its suggestions for the utilization of fashion product upcycling coffee bean bags and waste denim. Also, upcycling fashion products could be competitive products in eco-friendliness and originality that can be a driving force for the sustainable development of fashion industry through the differentiation of existing fashion products.

• 생명과학회지
• /
• 제8권4호
• /
• pp.426-430
• /
• 1998

본 연구는 RAPD마커를 이용, 멧누에와 집누에의 분자적 유연관계를 분석하였다. 공시한 35개의 primer에서 166개의 RAPD마커를 얻었으며, 이들 마커를 UPGMA에 의해 분석한 결과, 멧누에와 분자적 유사계수가 가장 낮은 품종은 잠305였고, 가장 높은 품종은 Bibaekjam이었다. 또한, 분자적 유사계수 0.55에서 멧누에와 집누에 계통군으로 분류되고, 0.60에서 3개의 아군 그룹과 2개의 독립개체로 분류되었다. 제1아군에는 J111(일본종계),$pnd^{ps}$(일본종계), Bibaekjam(일본종계)이, 제2아군에는 Galwon(중국종계), C18(중국종계), od yujam JAM306(중국종계), C108(중국종계)이, 제3아군에는 R-hwang(중국종계)이 포함되어 있었고, zebra(유럽종계)와 JAM305(일본종게)는 독립개체로 분류되었다.