• Journal of the Korean earth science society
• /
• v.23 no.1
• /
• pp.52-58
• /
• 2002

A colorless and transparent zirconium oxide ($Zr_{0.73}Y_{0.27}O_{1.87}$) crystal has been synthesized by the Bridgman-Stockbager method. The gem-quality material is produced by adding 20${\sim}$25 wt.% $Y_2O_3$ (stabilizer) and 0.04 wt.% $Nd_2O_3$ (decolorising agent) to the $ZrO_2$ powder. It shows a vitreous luster with a slight oily appearance. Under a polarizing microscope, it shows isotropic nature with no appreciable anisotropism. Mohs hardness value and specific gravity is measured to be 8${\sim}$$8{\frac{1}{2}}$ and 5.85, respectively. Under ultraviolet light it shows a faint white glow. The crystal structure of yttria-stabilized zirconia with 0.27 at.% Y has been re-investigated, using single crystal X-ray diffraction, and confirmed to be a cubic symmetry, space group $Fm{\overline{3}}m$ ($O^5_h$) with a=5.1552(5) ${{\AA}}$, V=136.99(5) ${{\AA}}^3$, Z=4. The stabilizer atoms randomly occupy the zirconium sites and there are displacements of oxygen atoms with amplitudes of ${\Delta}/a{\sim}$0.033 and 0.11 along <110> and <111> from the ideal positions of the fluorite structure, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.10
• /
• pp.938-945
• /
• 2003

We fabricated Ni-substrate for YBCO coated conductors and evaluated the effects of pressing and annealing temperature and time on texture. Ni substrate was fabricated by powder metallurgy technique and compacts were prepared by applying uniaxial or isostatic pressure. The texture of substrate made by applying cold isostatic pressure (CIP) was stronger than that by uniaxial pressure which we attribute to the fact that the CIP method provided higher density and more uniform density distribution. It was observed that the substrate annealed at 400 C showed both retained texture and recrystallized texture. On the other hand, the texture of substrate significantly improved at annealing temperature above 500 C, forming strong 4-fold symmetry, [111] II ND texture, and FWHM of 9∼10 . It is to be noted that the degree of texture was almost independent of annealing temperature (500∼1000 C) and annealing time(1∼54 min, at 1000 C). EBSD and AFM analysis indicated that 99% of grain boundaries was low angle grain boundary and RMS was approximately 3 nm, respectively. Development of strong cube texture and high fraction of low angle grain boundary of Ni-substrate made by powder metallurgy technique in our study is considered to be suitable for the application of YBCO coated conductors.

• Journal of Fashion Business
• /
• v.5 no.3
• /
• pp.111-128
• /
• 2001

The purpose of part I of this research was to study the definition of the wearable computer, the influential factors which led to its advent, the history of its progress and to prospect the figure of future research in fashion field of it. A qualitative analysis was applied to fulfill the research purpose, in which academic reports, professional journals, newspapers, magazines, books and sites were reviewed and analyzed in depth. The wearable computer which has been developed as a type of the portable hardware for computing during the first period, 1960s-1980s, has progressed into apparently softer and technologically advanced prototypes during the 2nd period, early-mid 1990s. From the beginning of the 3rd period since late 1990s, 'really wearable' prototypes were developed as the results of efforts to invent the more comfortable and interactive 'wearcomp' Based on the result of the analysis, the meaning of wearable computer in fashion field was interpreted in this study, as a reflection of converged demand and tendency of this era. New issues for future research of the wearable computer were suggested in the viewpoint of fashion design.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.68-71
• /
• 2003

We fabricated Ni-substrate for YBCO coated conductors and evaluated the effects of pressing and annealing time on texture. Ni substrate was fabricated by powder metallurgy technique and compacts were prepared by applying uniaxial or isostatic pressure. The texture of substrate made by applying cold isostatic pressure (CIP) was stronger than that by uniaxial pressure. The texture of substrate made by CIP had a strong 4-fold symmetry and [111] ∥ ND texture after annealing temperature of 100$0^{\circ}C$. It is to be noted that the degree of texture was almost independent of annealing time and the full-width at half-maximum (FWHM) of in-plane and out-of-plane was measured to be in the range of 9.55$^{\circ}$-10.53$^{\circ}$ and 8.57$^{\circ}$-9.85$^{\circ}$, respectively. Development of strong cube texture of Ni-substrate made by powder metallurgy technique in our study is considered to be suitable for the application of YBCO coated conductors.

• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.111-116
• /
• 1997

The oral cavity is easily accessible for direct exposure of a malignant disease. 1 percent of the oral malignant tumors are of metastatic origin and approximately 10 percent to 25 percent of the 1 percent fraction originate from the lungs. A case of metastatic lung carcinoma to the gingiva in a 88-year-old male is reported. He complained of pain and swelling between right maxillary 1st premolar and 2nd molar. Although surgical excision of the lesion has been done, the gingival lesion developed as a quickly growing mass and recurred 2 weeks after surgical excision. The gingival mass was histopathologically diagnosed as an undifferentiated carcinoma. Epithelial layer was continuous without ulceration and it seems that the cancer cells are originated from primary tumor. Infiltrated cancer cells were pleomorphic and dyskeratotic. The cells had 2 or more nuclei, not showing squamous or glandular differentiation. Immunohistochemical study revealed the cells originated from the epithelial cells. The prognosis is poor, because prognosis depends on surgical elimination of the primary tumor.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.259-268
• /
• 2005

In order to analyze the sheet drawability, the measurement of the plastic strain ratio was carried out for the 5182 aluminum alloy sheets in which were cold rolled without lubrication and subsequent recrystallization annealing. The average plastic strain ratio of the 5182 aluminum sheets was 1.50. It was considered that the higher plastic strain ratio was resulted from the ND//<111> component evolved during rolling and maintained during annealing. The AA5182/polypropylene/AA5182 (AA/PP/AA) sandwich sheets of the 5182 aluminum alloy skin sheet and the polypropylene core sheet with high formability have been developed for application for automotive body panels in future light weight vehicles with significant weight reduction. The AA/PP/AA sandwich sheets were fabricated by the adhesion of the core sheet and the upper and lower skin sheets. The AA/PP/AA sandwich sheet had high plastic strain ratio (1.58), however, the planar anisotropy of the sandwich sheet was little changed after fabrication. The optimum combination of directionality of the upper and lower skin sheets having high plastic strain ratio and low planar anisotropy was calculated theoretically and an advanced process for producing the sandwich sheets with high plastic strain ratio was proposed. The developed sandwich sheets have a high average plastic strain ratio of 1.55 and a low planar anisotropy of 0.17, which was improved more by 3.2 times than that of 5182 aluminum single sheet.

• Korean Institute of Interior Design Journal
• /
• v.25 no.2
• /
• pp.101-111
• /
• 2016

As globalization proceeds, transnational property development is increasing. Vietnam has began to experience a serious housing shortage throughout the urbanization process and they try to solve this housing problem in the city by development of New Town with an excellent technique. Of these, New city, Phu My Hung (PMH) is known as a very successful example. Therefore, this study researched 145 plan of 15 Apartment complexes which were completed after 2008 to analyse the plan characteristic of internal-external of Apartment in PMH New city in Ho Chi Minh City which effected the housing development in Vietnam. We collected the data from Internet and researched the characteristic of complex and an individual unit by visiting 6 Apartment complexes directly on Aug, 2014. In PMH, apartment has pattern of Mixed-use Apartment. There are stores on the 1st ad 2nd floor and consisted of 2 or 3 small complexes. They secure enough Green Space and Community Space and control visitor access for the safety of residents. Inside space organization is mainly consisted of 3LDK+2BATH and Public space and Private space is placed separately. Also, placed the Kitchen independently and it is quiet interesting that the entrance entry into the house directly from the external space.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.111-112
• /
• 2006

In order to investigate flow characteristics of blood flow in a micro tube ($100{\mu}m$ in diameter) according to hematocrit, in-vitro experiments were carried out using a micro-PIV technique. The micro-PIV system consists of a microscope, a 2 head Nd:YAG laser, a 12 bit cooled CCD camera and a delay generator. Blood was supplied into the micro tube using a syringe pump. Hematocrit of blood was controlled to be 20%, 30% and 40%. The blood flow has a cell free layer near the tube wall and its thickness was changed with increasing the flow rate and hematocrit. The hemorheological characteristics such as shear rate and viscosity were evaluated using the velocity field data measured. As the flow rate increased, the blunt velocity profile in the tube center was sharpened. The viscosity of blood was rapidly increased with decreasing shear rate, especially in the region of low shear rate, changing RBC rheological properties. The variation of velocity profile and blood viscosity shows typical characteristics of Non-Newtonian fluids. On the basis of inflection points, the cell free layer and two-phase flow consisting of plasma and suspensions including RBCs were clearly discriminated.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.105-111
• /
• 2019

In this paper, I introduce the development of a system to register Korean standard technical terms which are corresponded with English electronical terminologies on the Electropedia of the International Electronical Committee(IEC). In 2016, this project was started with the permission of registration at the Technical Committee 1 of the $80^{th}$ IEC General Meeting in Frankfurt, Germany. The work was consisted of 3 parts, the 1st step was gathering Korean vocabularies and building a databse for the translation of English terms of International Electronical Vocabulary(IEV) into Korean terms, the 2nd step was to find correct or proper Korean term which is in accord with each English term of IEV on the Electropedia. In this step, members of Korean TC 1 worked for search proper Korean terms using developed computer programs and databases which were made of Korean electronical dictionaries. After selection of proper terms, they did the cross-checking work for Korean terms each other. The last step was to register all of these Korean terms on the Electropedia. As a result, 20,766 Korean electronical terms were registered on the Electropedia in 2017. In the future, it is needed that the definition of English technical terms are translated into Korean.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.273-278
• /
• 2007

Recently, the demand for the powdered products to process raw grains and vegetables has been expanded, and the growth possibility of their fields(markets) in the future will be highly valued with the westernization of living environment and the change of the dietary life. We have bought and analyzed the 111 products of raw grains and vegetables from the large-sized marts, markets and internet orders from March to October 2006. The rate of moisture content was $1.7{\sim}12.5%$. We also found out that the foods over 10% moisture content was 8 of those samples we bought or collected. Their ash rates were averagely $0.3{\sim}8.6%$. The number of those foods that the alien substances were detected was 2. The tar pigments, artificial sweeteners and sulfur dioxides of components that contained food additives were not detected. Each detection range of Cadmium, Lead and Arsenic of the injurious heavy metals was non-detectable $(nd){\sim}0.55,\;nd{\sim}4.52,\;nd{\sim}0.10mg/kg$, while the average detection content were 0.08, 0.48, 0.01 mg/kg. By investigating the contamination degree of the microflora, we discovered that the number of the aerobic plate count, B. cereus over 1,000 cfu/g and C. perfringens over 100 cfu/g was 36 (32.4%), 9 (8.1%) and zero, and that the whole sanitation condition of the products of powdered raw grains and vegetables circulated in the market was not so good.