• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.100-103
• /
• 1996

Presented in this study is an algorithmic procedure to obtain polyhedral model from a compound surface. The compound surface in this study denotes a collection of trimmed surfaces without topological relations. The procedure consists of two main modules: CAD data interface, and surface conversion to polyhedral model. The interface module gets geometric information from CAD databases, and makes topological information by scanning the geometric information. We are investigating CATIA system as a data source system. In the surface conversion module, a shell(compound surface with topological information) is approximated to a triangular-faceted polyhedral surface model through node sampling and triangulation steps. The obtained polyhedral model should obey the vertex-to-vertex rule and meet tolerance requirements. Since the polyhedral model has a simple data structure and geometry processing for it is very efficient and robust, the polyhedral model can be used in various applications, such as surface rendering in computer graphics, FEM model for engineering analysis, CAPP for surface machining, data generation for SLA, and NC tool path generation.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.149-155
• /
• 2001

Recently, it is required to design higher stage pressure ratio compressor while maintaining equal adiabatic efficiency. To increase the stage pressure ratio, blade rotational speed or diffusion factor should be increased. In the case of increasing rotational speed, relative speed of flow at blade leading edge is well supersonic. In supersonic blade, total pressure loss is mainly due to shock wave and blade leading edge thickness should be very thin to minimize the shock wave loss. As a result, the blade is like to be week in terms of mechanical strength and the manufacturing cost is very high because NC machining is necessary. It is also one of big hurdle to overcome to make small compressor. In this paper, the effects of blade leading edge to the performance of supersonic blade In terms of total pressure loss. The efficiency of already known method to make thin blade leading edge from the casted blade with rather thick leading edge thickness is also assessed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.815-820
• /
• 1991

4축 자유곡면가공에 있어서 공구간섭 문제는 가공형상의 취득성 뿐만 아니라 가공의 정밀도를 위하여 매우 중요한 고려사항이다. 공구의 접근자세가 고정된 3축 밀링가공의 공구 간섭에 관한 기존의 많은 연구가 있지만 이러한 연구는 공구의 접근자세가 변하는 4축 밀링가공에의 적용이 곤란하다. 왜냐하면 곡면의 형상에 따라 공구몸체의 곡면사이의 간섭문제가 부각되며, 이에 따른 공구자세의 창출문제가 해결되어야 하기 때문이다. 따라서 본 논문에서는 4축가공에서 발생할 수 있는 공구 간섭을 유형별로 분류, 각 간섭들을 발견하고 해결할 수 있는 방법의 전개와 이 방법을 이용하여 공구경로를 산출하고 그래픽 시뮬레이션과 실제의 시험절삭을 통하여 제시된 방법의 유효성을 검증한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.3
• /
• pp.77-83
• /
• 1985

Adaptive control technique for a milling process is developed and implemented in an NC milling machine retrofitted to enable the micro-computer control. The control algorithm has the objects to guarantee the optimal tool life which can give the predetemined allowable lower limit of surface roughness. The experimental results show 1) that the extended tool life equation has good reliability in normal tool wear conditions. 2) and that the proposed adaptive control technique, which determine the optimal cutting condition by basing on the tool life equation modified continually according to the tool wear measured in real time, performs well.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.7-11
• /
• 1992

수치제어(NC) 공작기계의 정도측정에 관하여, 지금 뜨거운 의논이 일본에서 일고 있다. ISO/TC39/SC2 (공작기계)를 중심으로 하여, 주로 위치결정 정도시험방법, machining center의 수취검사방법, 단운동시험방법에 관하여 의논이 진전되고 있다. 종래의 공작기계의 수취검사항목인 기하학적 정도시험이나 공작정도시험만이 아니 고, 수치제어공작기계 특유의 시험 방법에 관한 의논이다. 특히 단운동시험은 검사규격에는 없는 전혀 새로운 검 사항목으로서, 특히 전용의 측정기구를 필요로 할 것, 특정결과의 해석이 간단하지 않다는 것, 경우에 따라서는 제조회사의 설계. 제조능력을 폭로하는 일도 있어서 이미본의 기업은 이 검사규격의 제정에는 매우 민감하다. 필 자는 일본의 ISO대표 위원으로서 국제회의에 출석하여 의논에 참석함과 동시에 일본공업규격(JIS)의 공작기계에 관계한 각종위원회의 주요 menber로서 활동해 왔다. 그리고 한편, 표준화에 관한 연구도 해왔다. 따라서, 금회의 강연회에서는 수치제어공작기계의 단운동시험방법과 그 결과를 이용하여 정도진단강법에 관하여 소개한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.276-280
• /
• 1996

This paper presents an indirect method for on-line measuring the cutting forces in contour NC milling processes by using the current signals of the servo drive motors. A Kaluman filler is used for estimating each of the load torques to the x, y-axis servo motors of a horizontal machining center. Then, the load torque induced by the friction force in the guidewayis estimated and subtracted from the total extermal torque, thus resulting in the load torque induced by the cutting force. A series of experimental works on the circular interpolated contour milling process shows good agrement between the cutting forces measured by the dynamometer and those estimated by the method presented in the paper.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.2
• /
• pp.175-183
• /
• 2000

Proposed in this paper is a model-bated AFA (automatic feedrate-adjustment) method for maintaining smooth cutting-loads (i.e., cutting-force) during 2D-profile milling. Before the cutting-force model was established, some assumptions were verified through a series of preliminary cutting experiments (The results found that the curving-force was independent of the cutting speed and the cutting action at the cutter bosom). From the data obtained during the main cutting experiments, a “chip-load/cutting-force model”representing the cutting-force as a function of the chip-load (i.e., effective cutting-depth) and a feedrate is proposed. Based on the model. an AFA scheme for maintaining smooth cutting-force by adjusting the feedrate (i.e., F-code) according to the changes in chip-load was proposed. To check the validity of the proposed AFA scheme. another set of cutting experiments was conducted by using feedrate-adjusted NC-data while monitoring the actual machining processes using an accelerometer. The experimental results showed that the proposed AFA-scheme was quite effective.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.4
• /
• pp.56-62
• /
• 2004

Using NC or CNC machine tool, the unmanned automatic production system has been growing recently in the manufacturing field. Thus it is important to find out the machinability of cutting force, tool wear and surface roughness during the cutting process. It is necessary to find how to estimate the machinability for the effective cutting condition because of problem about cutting power, tool wear, cutting time and precision. This study was planned to discover the relations of tool wear by variations of roughness and derived to correlate the wear with the surface roughness on the cutting parameter(cutting force, flank wear, surface roughness, friction angle, shear angle, slenderness ratio) when the aluminum alloy was cut in turning.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.746-752
• /
• 2010

Rib structure has been used to bed and column of machine tool to heighten weight stiffness ratio, cost performance and weight saving. In this paper the bed rib structure was estimated with thermal characteristics. Using superposition principle, machine tool designer can describe every complicated heat generation in the machine tool thermal source. As thermal characteristics, thermal deformation of guide rail and column and Maximum-minimum temperature variation were selected. The size, configuration and direction against the thermal loading surface operated to the thermal characteristics. The DB chart was made following rib structure estimating thermal characteristics. With superposition principle and DB chart, machine tool designer can prognosticate the thermal characteristics without FEM analysis to every bed rib structure.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.161-167
• /
• 1996

In five-axis milling, optimal CL-data (cutter location data) should be generated to have advantages over three-axis milling in terms of accuracy and efficiency. This paper presents an algorithm for generating collision-free CL-data for five-axis milling using potential energy method. By virtually charging the cutter and part surfaces with static electricity, global collision as wells as local interference is eliminated. Additionally, machining efficiency is improved by minimizing the curvature difference between the part surface and tool swept surface at a CC-point (cutter contact point) simultaneously.