• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.207-213
• /
• 2004

This paper describes the development of Behind-Tape-Reader (BTR) type DNC system using CYBER 180-830 as a central computer and IBM PC-AT cell control computer and NC lathe with FANUC 5T NC controller. In this system, the connection between central computer and cell control computer is done via RS-232C serial interface board, and that between cell control computer and FANUC 5T controller is done via parallel interface board. The software consists of two module, central computer communication module for NC program downloading and status uploading, NC machine running module for NC operating.

• IE interfaces
• /
• v.19 no.1
• /
• pp.43-52
• /
• 2006

In order to make best use of NC machine tools with minimal labor costs, they need to be in operation 24 hours a day without being attended by human operators except for setup and tool changes. Thus, unattended machining is becoming a dream of every modern machine shop. However, without a proper mechanism for real-time monitoring of the machining processes, unattended machine could lead to a disaster. Investigated in this paper are ways to using PC camera as a real-time monitoring system for unattended NC milling operations. This study defined five machining states READY, NORMAL MACHINING, ABNORMAL MACHINING, COLLISION and END-OF-MACHINING and modeled them with DEVS (discrete event system) formalism. An image change detection algorithm has been developed to detect the table movements and a flame and smoke detection algorithm to detect unstable cutting process. Spindle on/off and cutting status could be successfully detected from the sound signals. Initial experimentation shows that the PC camera could be used as a reliable monitoring system for unattended NC machining.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.214-219
• /
• 2001

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric errors, thermally-induced errors, and the deterioration of the machine tools. Geometric and thermal errors of machine tools should be measured and compensated to manufacture high quality products. In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. In this study, the compensation device and temperature-based algorithm have been presented in order to compensate thermal error of machine tools under the real-time. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses, a designed spherical ball artifact, and five gap sensors. In order to compensate thermal characteristics under several operating conditions, experiments performed with five gap sensors and manufactured compensation device on the horizontal machining center.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.27-33
• /
• 1999

In order to regulate cutting force at a desired level during NC lathe process, a feedrate override Adaptive Control Constraint system was developed. Nonlinear model of the cutting process was linearized as an adaptive model with a time varing process parameter. Performance of the ACC system was confirmed on the NC lathe equipped with the developed NC system through a large amount of experiment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.986-991
• /
• 2004

For volumetric error measurement and calibration for machine tools, manufacturing machine or coordinate measuring machine (CMM), are studied using a Ball-bar artifact. A design of the Ball-bar is suggested manufactured by Invar, which is a low thermal expansion material, and precision steel balls. The uncertainty for the artifact method is discussed. A method of the Ball-bar artifact for obtaining 3-D position errors in CMM is proposed. The method of error vector measurement is shown using the Ball-bar artifact. Finally, the volumetric error is calculated from the error vectors and it can be used for Pitch error compensation in conventional NC machine and 3-D position Error map for calibration of NC machine tools.

• Journal of the KSME
• /
• v.18 no.2
• /
• pp.76-83
• /
• 1978

공작기계업계는 이와 같은 수출전략산업화라는 측면과 내수면에서의 압박을 벗어나기 위해서는 공작기예의 NC화, 자동화를 강력히 추진하지 않을 수 없는 입장인 바 본고에서는 첫째, 공작기계 의 NC화 배경을 좀더 상세히 고찰하고, 둘째, 미, 일등의 기술동향을 검토하여 한국 공작기계업 계의 방향을 모색하며, 세째, NC공작기계의 국산화에 따르는 제문제점을 검토하여 이에 대한 해결방안을 모색해 보려 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.591-594
• /
• 2002

Generating NC-code from 3D part model needs a lot of effort to make many decisions, including machining area, tool change data, tool data, cutting condition, etc., by using either manual or computer aided method. This effort can be reduced by integration of automated process planning and NC-code generation. In case of generating NC code with a help of the process planning system, many data mentioned from the process planning can be used. It means that we can create NC-code about a full part. In this study, integration of FAPPS(Feature based Automatic Process Planning) with a NC-code generating module is described and additional data to adapt NC-code for machine shop is discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.305-311
• /
• 1993

In recent years, it has been variously developed for testing the accuracy of circular motion of NC machine tools, for example Telescoping Ball Bar Method by Bryan,Circular Test Method by Knapp and r $_{- \theta}$ Mathod by Tsutsumi etc., but it is not yet settled in the code of measuring methods of motion errors of NC machine tools, because of errors of measuring units and sensors, and also especially the difficulties of centering of measuring units. In this paper, in use of magnetic type linear scale with resolution of 0.5 .mu. m and tick pulses come out from computer, it has become possible for detecting of linear displacement of radial errors and measuring of revolution angle of circular motion of NC machine tools.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.4
• /
• pp.329-337
• /
• 2015

In this paper, a simulation based estimation method of energy consumption of the spindle and feed drives for the NC machine tool during the cutting process is proposed. To predict energy consumption of the feed drive system, position, velocity, acceleration and jerk of the table are analyzed based on NC data and then the power and energy are calculated considering friction force and mass of the stages. Energy consumption of the spindle is estimated based on models from acceleration motion of rotating parts, friction torque and power loss of motors. Moreover, simulation models of cutting power and energy for the material removal along the NC tool paths are proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1191-1194
• /
• 1995

A conversational programming system for turning processes was studied to enhance the user friendlness of an NC by adopting man-machine interface functions through Visual C $^{++}$ programming tool under the Windows 95 environment. Shop floor programming performance was incorporated in the developed CAM module. In order to increase flexibility of the man-machine interface, graphic based programmin tool have been developed. An NC turning machine equipped whit an open architecture PCNC was used as a test bed of the system. Perfomance of the system was verified through case studies..