• 한국항공우주학회지
• /
• 제40권2호
• /
• pp.139-145
• /
• 2012

천음속 영역에 적합하도록 개발된 수정 Sonic Arc 익형의 저속 공력특성에 대해 조사하였다. 이 익형은 Schwendenman이 제안한 sonic arc 형상 함수와 NACA0012 형상 data 그리고 상용 프로그램 Maple을 이용하여 설계하였다. 수정 Sonic Arc 익형의 저속공력 특성을 조사하기 위해 마하수 0.3 이하에서 수치해석을 수행하고 그 결과를 NACA0012 익형의 저속 공력성능과 비교분석하였다. 각 마하수에서 수정 sonic arc 익형의 항력은 NACA0012의 항력보다 약 1.5% 정도 작게 나타났으며, 양력 비교에서도 수정 Sonic Arc 익형의 양력은 NACA0012의 양력보다 약 2% 정도 일정하게 작게 나타났다. 또한 각 마하수에서 수정 Sonic Arc 익형의 모멘트 계수는 NACA0012의 값보다 약 1.4% 정도 작게 나타났다.

• 한국항공우주학회지
• /
• 제35권7호
• /
• pp.581-585
• /
• 2007

TSD 이론으로 구해진 sonic arc 익형의 형상을 새로운 익형 형상으로 수정하고 천음속 유동에서의 공력 성능을 조사하였다. Euler solver를 이용하여 수정 sonic arc 익형에 대한 수치계산을 수행하고 그 결과를 NACA0012 익형의 공력 성능과 초임계 익형의 공력 성능 그리고 NACA64A210 익형의 공력성능과 비교하였다. 천음속 유동의 같은 자유 유동 마하수에서 수정 sonic arc 익형의 압력 항력은 NACA0012 익형의 압력 항력보다 더 작게 나타났으며 수정 sonic arc 익형의 양항비는 NACA0012 익형의 양항비보다 훨씬 크게 나타났다. 천음속 유동에서의 항력 발산 마하수 비교에서는 수정 sonic arc 익형의 항력 발산 마하수가 NACA64A210 익형의 항력 발산 마하수보다는 크게 나타났지만 초임계 익형의 항력 발산 마하수 보다는 작게 나타났다.

• 한국유체기계학회 논문집
• /
• 제4권2호
• /
• pp.29-34
• /
• 2001

Experimental and numerical studies are conducted to investigate the flow field over a NACA0012 airfoil with ground effects. In experiment, the ground is simulated by a moving belt system. From the comparison between the experimental and numerical results, it is concluded that the velocity gradient over the ground plane causes the increments in pressure coefficient on lower surface of the airfoil and reduces the suction peak at the leading edge.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.479-482
• /
• 2002

Riblets with longitudinal grooves along the streamwise direction have been used as an effective flow control technique for drag reduction. A flexible micro-riblet with v-grooves of peak-to-peak spacing of $300{\mu}m$ was made using a MEMS fabrication process of PDMS replica. The flexible micro-riblet was attached on the whole surface of a NACA0012 airfoil with which grooves are aligned with the streamwise direction. The riblet surface reduces drag coefficient about $7.9{\%}\;at\;U_o=3.3m/s$, however, it increases drag about $8{\%}\;at\;U_o=7.0m/s$, compared with the smooth airfoil without riblets. The near wake has been investigated experimentally far the cases of drag reduction ($U_o\;=\;3.3 m/s$) and drag increase ($U_o\;=\;7 m/s$). Five hundred instantaneous velocity fields were measured for each experimental condition using the cross-correlation PIV velocity field measurement technique. The instantaneous velocity fields were ensemble averaged to get spatial distribution of turbulent statistics such as turbulent kinetic energy. The experimental results were compared with those of a smooth airfoil under the same flow condition. The micro-riblet surface influences the near wake flow structure largely, especially in the region near the body surface

• International Journal of Aeronautical and Space Sciences
• /
• 제13권3호
• /
• pp.317-322
• /
• 2012

The low speed aerodynamic characteristics for a modified sonic arc airfoil which is designed by using the nose shape function of sonic arc, the shape function of NACA four-digit wing sections, and Maple are experimentally investigated. The small rotor blades of a modified sonic arc and NACA0012 airfoil are precisely fabricated with a commercially available light aluminum(Al 6061-T6) and are spin tested over a low speed range (3000rpm-5000rpm). In a consuming power comparison, the consuming powers of NACA0012 are higher than that of modified sonic arcs at each pitch angle. The measured rotor thrust for each pitch angle is used to estimate the rotor thrust coefficient according to momentum theory in the hover state. The value of thrust coefficients for both two airfoils at each pitch angle show almost constant values over the low Mach number range. However, the rotor thrust coefficient of NACA0012 is higher than that of the modified sonic arc at each pitch angle. In conclusion, the aerodynamic performance of NACA0012 is better than that of modified sonic arcs in the low speed regime. This test model will provide a convenient platform for improving the aerodynamic performance of small scale airfoils and for performing design optimization studies.

• EDISON SW 활용 경진대회 논문집
• /
• 제1회(2012년)
• /
• pp.53-56
• /
• 2012

항공기에 작용하는 공기역학적 힘인 양력과 항력은 항공기 날개 설계에서 성능을 좌우하는 성능지수로 주로 이용된다. 본 연구에서는 NACA0012 airfoil 모델의 공력특성을 EDISON 열유체 시뮬레이션 프로그램(이하 EDISON)을 이용해 분석하고 검증해 보았다. 아음속 유동의 특정 조건에서 받음각과 유동형태에 따른 공력특성 분석을 수행하여 받음각에 따라 변하는 양력계수, 항력계수, 양항비, 실속각과 천음속 유동 조건에 맞추어진 마하수 0.5~1.22 영역에서 변하는 항력계수를 기존 데이터와 비교 검증했다.

• 대한기계학회논문집B
• /
• 제25권5호
• /
• pp.645-652
• /
• 2001

Heat transfer data are presented which describe characteristics of the transitional thermal boundary layers on the NACA0012 airfoil with upstream wakes. The wakes are generated periodically by circular cylindrical rods which rotate around the airfoil like a squirrel cage. The unsteady wakes simulate those produced by the upstream rotating blade rows in axial turbomachines. The pressure or suction side of the airfoil is also simulated according to the rotating direction of circular rods. As the Reynolds number and the number of rotating rods increase, the boundary layer transition occurs earlier and the Nusselt number increases. The difference of heat transfer coefficient is less on the pressure side than on the suction side. At a constant Reynolds number, the Nusselt number is larger and smaller, respectively, before and after transition as the Strouhal number increases.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.291-293
• /
• 2011

In this paper, the problem of transonic aerodynamic characteristics of a NACA0012 airfoil is numerically investigated in the inviscid gas-droplet two-phase flow with the compressible two-fluid model. In the present study, the airfoil flight in the cloud is simulated by taking account of the viscous drag of the droplets, the heat transfer, the phase change, and the droplet fragmentation The two-fluid equation system is solved by the fractional-step method and the WAF-HIL scheme. The effects of size and volume fraction of the droplets on the flow characteristics of the airfoil in the cloud are elaborated and discussed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.199-201
• /
• 2011

NACA0012 Airfoil was simulated with Computational Fluid Dynamics(CFD) and the aerodynamic characteristics was analyzed for various far-field boundary distances ranging from 10 airfoil chord to 50 chord Drag coefficient distribution was dependent on the far-field distance and circulation, integrated along the loop inside the flow region, was also dependent. It was turned out that some corrections based on the circulation should be added to the far-field boundary condition for accurate airfoil simulation.

• 동력기계공학회지
• /
• 제3권1호
• /
• pp.29-37
• /
• 1999

The flow characteristics of a NACA0012 airfoil was investigated in rectangular water circulating channel. The flow patterns around an airfoil at various angles of attack between $0^{\circ}\;and\;30^{\circ}\;at\;Re=1.91{\times}104$ were visualized and measured with 2-D PIV system and laser sheet illumination. Flow behaviors such as velocity distribution, kinetic energy and flow separation etc. around an airfoil were obtained by means of 2-D PIV system. The behaviors show the difference of flow pattern clearly and separation phenomena become more active with increasing angle of attack.