• Preventive Nutrition and Food Science
• /
• v.2 no.1
• /
• pp.1-5
• /
• 1997

Solution Properties of polyelectrolytic biopolymers such as chitosen, pectin, alginate and etc. are significantly influenced by molecular weight and salt concentrations. The effect of NaCI concentration on the hydrodynamic properties of chitosan in dilute region was investigated for chitosans of varying molecular weight. Intrinsic vicosity([η]) of citosans with 5 different molecular weight was determined by glass capillary viscometer, and the viscosity average molecular weight was calculated using Mark-Houwink equation. Intrinsic viscosity decreased with increasing NaCI concentration for all chitosan samples, and it was proportional to the logarithmic NaCI concentration, i.e.,[η]∝log{TEX}$(C_{NaCl})^{$\alpha$}${/TEX}. Decreasing trend of[η] with NaCI concentration became more pronounced with increasing molecular weight. It was also found that the a values, indicating {TEX}$C_{NaCl}${/TEX} dependence of[η], were linearly correlated with the logarithmic molecular weight({TEX}$R^{2}${/TEX}=0.980). The chain stiffness parameters(B) were calculated by B=S./{TEX}$([η]_{0.1})^{1.32}${/TEX}, in which S was obtained from slope of [η] va {TEX}$I^{-1/2}${/TEX}. The B values of chitosan samples were determined to be 0.113~0071 with a average of 0.09.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.717-723
• /
• 2006

Lead free $(Na_{0.5}K_{0.47}Cd_x)NbO_3$ ceramics (x=0.015-0.005) were prepared by the conventional mixed oxide route. The effects of CdO addition on the sintering, dielectric and piezoelectric properties of the samples were examined. The addition of CdO greatly enhanced the sinterability of ceramics and the sample has a lower dielectric loss. The $k_p\;and\;Q_m$ of the samples with 0.02 mol CdO addition are 0.35 and 125, respectively, The $(Na,K)NbO_3$ ceramics show a large degradation of $k_p$ due to the deliquescence when exposed to humidity, while the $(Na,K,Cd)NbO_3$ ceramics have no a significant degradation of it.

• Conservation Science in Museum
• /
• v.1
• /
• pp.61-74
• /
• 1999

Elemental analysis of 40 glass samples from the Northern Tomb and the Southern Tomb of Hwangnam-daech'ong No. 98 was performed. Fourteen compositions of each sample were analyzed quantitatively by SEM-EDS and glass samples were classified by multivariate analysis such as PCA. All of 40 samples were confirmed to be Na₂O-CaO-SiO₂ system with about 20% of Na₂O. Samples were classified into two groups by doing PCA on concentrations of 5 major elements(SiO₂, Al₂O₃, Na₂O, CaO and K₂O). Samples included in group I showed the concentration of Al₂O₃ is about 9.7% and that of CaO, about 2.2%. In group II, concentration of Al₂O₃ is about 3.2% and that of CaO, about 4.9%. Especially yellow grains embedded in sample No. 12 were shown to be PbSnO₃ by micro XRD, which was the first coloring material ever found in Korea. Lead isotope ratios of samples No. 12 and No. 17 which contained lead were measured by TIMS. The origin of lead was traced by means of multivariate analysis such as SLDA. The result showed that lead from southern China and southern Korea had been used for making glass.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.10
• /
• pp.659-664
• /
• 2016

Thermal and electrical conductivities of the natural, artificial, and expandable graphites were analyzed after treatment in NaOH aqueous solution. In order to investigate the elimination of the oxidized groups and impurities on the graphite surfaces after NaOH treatment, the graphite samples were structurally characterized by using XRD, XPS, Raman, FE-SEM. The thermal and electrical conductivities of the graphite samples were significantly improved after NaOH treatment. These results were caused by the structural rehabiliation.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.136-142
• /
• 1988

β-Al2O3, which is used for solid electrolyte membrances in sodium-sulfur batteries, was prepared by sol-gel process. Sodium-n-propoxide NaOC3H7 and aluminum-isopropoxide Al(OC3H7)3 were hydrolyzated in the solution at pH 3, pH 7, pH 9 and pH 11, respectively. The sol-gel processed samples were calcined at several temperature steps, respectively and analysed by thermal analyser(DT-TGA), infrared spectrum analyser and X-ray diffraction analyser. The gelling rate of solution at pH 7 was much higher than that of the solution at pH 3. Thermal exchanging behavior of the gels at pH 3 were similar to Na2O·Al2O3·6H2O and, above pH 7, were similar to Na2O·Al2O3·3H2O. When samples' composition ratio was 9.13 : 90.87 [NaOC3H7:Al(OC3H7)3] at pH 7, β-Al2O3 was formed at 1100℃.

• The Journal of Engineering Research
• /
• v.6 no.2
• /
• pp.23-32
• /
• 2004

Metals, ceramics and polymers are widely used as bioimplant materials. However, Ti and Ti alloys are widely used because of its high strength to weight ratio and good biocompatibility when implanted in the body. In this experiment, Ti alloys of Grade-4 (gr4), 0.2 wt % Fe, 0.5 wt % Fe and 2 wt % Fe were studied for their surface morphology and HAp forming ability on the metal substrate for different treatments. Intially, the samples were mechanically polished on silicone carbide paper (No.-2000). The polished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. The NaOH treated samples were washed gently with distill water and dried at $40^{\circ}C$ for 1 day. The dried samples were heated in air at $600^{\circ}C$ for 1 hour. The surface morphology of these samples were studied using SEM. The SEM studies showed network of pores in all samples. These samples were immersed in stimulated body fluids (SBF) kept at $36.5^{\circ}C$ for different periods over the length of 1 to 14 days. The apatite formation was confirmed on all Ti-alloys using EDAX.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.1
• /
• pp.39-48
• /
• 2001

Fe-Cr-Al alloy has been studied for application in automobile muffler materials due to good corrosion and oxidation resistance. In order to develop the automobile muffler materials, corrosion behaviors of electron beam physical vapor deposition (EB-PVD) coated surface of muffler matericls of muffler materials were investigated using potentiostat. For 0.1M NaCl solution, corrosion potential and pitting potential of Fe-20Cr-10Al was higher than that of Fe-5Cr- 10Al samples. Especially, in the case of Ti and Nb coated samples, pitting potential increased remarkably compared with non-coated samples. For 0.1M $CaCl_2$ solution, Ti-coated Fe-20Cr-10Al showed remarkably improved pitting corrosion resistance in comparison with non-coated Fe-20Cr-10Al and Fe-5Cr-10Al. The number and size of pits were decreased in the case of Ti coated samples in the 0.1M NaCl and 0.1M $CaCl_2$ solution.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.33-34
• /
• 2003

Lyocell yarns were treated with NaOH, liquid ammonia, high pressure steam and polycarboxylic acids, and dyed with five reactive dyes. The water content of the samples was also measured by the centrifugal and chromatographic techniques. The total pore volume w as substantially increased by NaOH treatment, while decreased by high pressure steaming. The pore size distributions for the dyed samples were affected by the dyes used.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.12-12
• /
• 2009

We weal know that PbO was poisonous and prone to volatilize, then to pollute the circumstance and hurt to people, so we should dope other innocuous additives instead of lead to increase Tc of composite PTC material. In order to prepare lead-free $BaTiO_3$-based PTC with middle Curie point, the incorporation on $(BaNaK)(TiNb)O_3$ into $BaTiO_3$-based ceramics was investigated on samples containing 0.05, 0.07 and 0.1mol% of $(BaNaK)(TiNb)O_3$. $(BaNaK)(TiNb)O_3$ was compounded as standby material by conventional solid-state reaction technique. The starting materials were $Na_2O_3$,$K_2CO_3$, $BaCO_3$, $TiO_2$ and $Nb_2O_5$ powder, and using solid-state reaction method, too. The microstructure of samples were investigated by SEM, DSC, XRD and dielectric properties. Phase composition and lattice parameters were investigated by X-ray diffraction. Also, we are measure the resistivity of sintered bodies with calcinations condition.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.17-22
• /
• 1999

Hexagonal M-type barium ferrite $BaFe_{12}O_{19}$ was prepared by a direct solid state reaction between $BaCO_3$ and ${\Alpha}-Fe_2O_3$ powders at temperatures ranging from 800 to 1000 $^{\circ}C$ in a nitrogen or air environment. The effects of NaCl on phase transformation of mixture of $BaCO_3$ and ${\Alpha}-Fe_2O_3$ to $BaFe_{12}O_{19}$ were studied using X-ray diffraction and M$\"{o}$ssbauer spectroscopy. Regardless of the environment for heat treatment or the added NaCl, two phases, BaFe and ${\Alpha}-Fe_2O_3$, coexist for samples heat treated at 800 $^{\circ}C$, but a single phase was observed from samples heat treated at 100$0^{\circ}C$ in both air and nitrogen environments. It was found that the addition of NaCl reduced the amount of $a-Fe_2O_3$ phase.hase.