• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.811-814
• /
• 2009

HF대 해상통신이 디지털방식으로 발전하기 위해서는 먼저 해안국과 다수의 선박국간에서 1:N 으로 자동링크설정을 수행할 수 있는 기법이 마련되어야 한다. 단순히 polling에 의한 방식을 사용할 수는 있으나 통신환경이 열악한 HF대 통신상태에서 특정국만을 호출하여 링크를 설정하기 위해서는 많은 redundancy 시간이 소요될 수밖에 없다. 아마추어 무선에서는 특정국을 선택호출하는 1:1 자동 링크설정 방식으로 ALE(Automatic Link Establishment) controller를 이용하고 있으나, 해상통신에서 이러한 방식으로 1:N의 링크설정을 기대하기는 매우 어렵다. 즉, 선박국들의 동시호출을 유도하면 다수의 호출신호에 의한 트래픽 과부하로 충돌을 회피하기는 어렵다. 때문에 HF대 통신은 채널 특성상 트래픽 상태를 고려하여 자동적으로 무선링크가 설정되어야 하며, 트래픽 과부하시에는 적응적으로 채널의 안정성을 확보하며 운용되어야 한다. 본 논문에서는 다수의 선박국이 HF대의 단일채널에서 멀티톤 주파수에 의하여 자유접속을 시도할 수 있는 방식을 연구하여 자유접속, 그룹접속, polling의 3가지 자동링크설정 방식을 순차적으로 구동하는 새로운 무선프로토콜에 대하여 연구하였다.

• Journal of Communications and Networks
• /
• 제18권3호
• /
• pp.351-363
• /
• 2016

This paper investigates the performance of interference-limited two-way transmission protocols in the Rayleigh fading channels. New lower bound of outage probability and approximate expression of bit error rate (BER) for three-phase two-way relaying (3P-TWR) protocol are derived in closed-form. These expressions are valid for arbitrary signal-to-noise ratio values, numbers of co-channel interferers and amajority of modulation formats employed in the practical system. Then a comparative study is developed for the performance of three two-way transmission protocols, i.e., direct transmission (DT) protocol, two-phase two-way relaying (2P-TWR) protocol and 3P-TWR protocol based on the asymptotic expressions of outage probability and BER. On the basis of the theoretical results, the thresholds on the strength (variance) of direct channel and target rate for the relative performance of different protocols are obtained and the effect of interferences at the terminal and relay on the relative performance is analyzed. The results present key insights on how to choose proper two-way transmission protocol with the knowledge of fading channels, required date rate and modulation format to optimize the system performance in the practical interference-limited scenarios. Simulation results are presented to validate the theoretical analysis.

• Electronic Materials Letters
• /
• 제14권6호
• /
• pp.784-792
• /
• 2018

In this letter, a standard deviation based optimization technique has been applied on High Resolution X-ray Diffraction symmetric and asymmetric scan results to accurately determine the Aluminum molar fraction and lattice relaxation of Molecular Beam Epitaxy grown compositionally graded Aluminum Gallium Nitride (AlGaN)/Aluminum Nitride/Gallium Nitride (GaN) heterostructures. Mathews-Blakeslee critical thickness model has been applied in an alternative way to determine the partially relaxed AlGaN epilayer thicknesses. The coupling coefficient determination has been presented in a different perspective involving sample tilt method by off set between the asymmetric planes of GaN and AlGaN. Sample tilt is further increased to determine mosaic tilt ranging between $0.01^{\circ}$ and $0.1^{\circ}$.

• 천문학회보
• /
• 제43권2호
• /
• pp.36.3-37
• /
• 2018

By utilizing large-scale graph analytic tools in the modern Big Data platform, Apache Spark, we investigate the topological structures of five different multiverses produced by cosmological n-body simulations with various cosmological initial conditions: (1) one standard universe, (2) two different dark energy states, and (3) two different dark matter densities. For the Big Data calculations, we use a custom build of stand-alone Spark cluster at KIAS and Dataproc Compute Engine in Google Cloud Platform with the sample sizes ranging from 7 millions to 200 millions. Among many graph statistics, we find that three simple graph measurements, denoted by (1) $n_\k$, (2) $\tau_\Delta$, and (3) $n_{S\ge5}$, can efficiently discern different topology in discrete point distributions. We denote this set of three graph diagnostics by kT5+. These kT5+ statistics provide a quick look of various orders of n-points correlation functions in a computationally cheap way: (1) $n = 2$ by $n_k$, (2) $n = 3$ by $\tau_\Delta$, and (3) $n \ge 5$ by $n_{S\ge5}$.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(B)
• /
• pp.488-491
• /
• 2011

For given g ${\geq}$ 3, this paper provides an O(1) time and O(n) space complexity algorithm for generation of biconnected rooted colored outerplanar graphs with face size bound g, where the graphs generated contain at most n vertices. The vertices are colored in such a way that each color has a corresponding degree bound. There is also a face size bound for each inner face of the graph. No duplications or isomorphic copies of a same graph are generated.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.727-735
• /
• 2002

Proton coupled carbon-13 relaxation experiment was performed to investigate the effect of vicinal protons on spin-lattice relaxation of methylene carbon-13 in n-undecane. A BIRD type pulse sequence was employed as a way to check the validity of describing the 13CH2 moiety as an isolated AX2 spin system. The results show that the presence of vicinal protons exerts substantial influence on the relaxation of methylene carbon-13, indicating that it is not a very good approximation to treat a methylene moiety as an isolated AX2 spin system.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 추계학술대회
• /
• pp.397-397
• /
• 2000

There exists an increasing need of study for generalized consecutive k-out-of-n systems. This paper demonstrates that a recursive formula for multi-dimensional consecutive k-out-of-n systems can be systematically developed by means of conventional structure function analysis. By taking advantage of notational convenience, the formulae expressed in the same recursive fashion just as the one dimensional consecutive k-out-of-n system. With the aids of the recursive formulae, not only the exact reliability of the system, but also the optimal arrangement of components is obtainable in a straightforward way.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.291-295
• /
• 2003

The occurrence of ductile fracture is the working limit of many metal forming processes. It is necessary to predict the criteria and to apply the condition in a process design. Over the years. the way for clarifying conditions have been studied and presented. However such a way needs lots of experiments and analysis. In this study, in order to determine the critical damage value of a used material Cu 4N, it was performed a tensile test and FEM analysis by using DEFORM 2D. For applying the obtained critical damage value it was also performed a upsetting test by using DEFORM 2D. The way of determining a critical damage value which is presented in this study will make possible to find easily it which is one of the working limit factor. And the way of determining a critical damage value will make possible to find in multi-pass drawing process.

• Journal of the Korean Statistical Society
• /
• 제34권3호
• /
• pp.219-233
• /
• 2005

The 3-way balanced multi-level rotation design has been discussed (Park Kim and Kim, 2003), where the 3-way balancing is done on interview time, in monthly sample and rotation group and recall time. A greater advantage of 3-way balanced design is accomplished by an estimator. To obtain the advantage, we generalized previous generalized composite estimator (GCE). We call this as l-step GCE. The variance of the l-step GCE's of various characteristics of interest are presented. Also, we provide the coefficients which minimize the variance of the l-step GCE. Minimizing a weighted sum of variances of all concerned estimators of interest, we drive one set of the compromise coefficient of l-step GCE's to preserve additivity of estimates.

• 대한수학회논문집
• /
• 제21권3호
• /
• pp.475-490
• /
• 2006

We give a way to obtain formulas for ${\pi}*{\psi}^{\kappa}_{n+1}$ in terms ${\psi}$ and ${\lambda}-classes$ where ${\pi}=\bar M_{g,n+1}{\rightarrow}\bar M_{g,n}(g=0,\;1,\;2)$ by the localization theorem. By using the formulas, we obtain Kontsevich-Manin type reconstruction theorems for $\bar M_{0,\;n}(\mathbb{R^m}),\;\bar M_{1,\;n},\;and\;\bar M_{2,\;n}$. We also (re)produce a lot of well-known relations in tautological rings, such as WDVV equation, the Mumford relations, the string and dilaton equations (g = 0, 1, 2) etc. and new formulas for ${\pi}*({\lambda}_g{\psi}^{\kappa}_{n+1}+...+{\psi}^{g+{\kappa}_{n+1}$.