• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.406-409
• /
• 2012

Recently, enormous research efforts have been focused on the development of non-precious catalysts to replace Pt for electrocatalytic oxygen reduction reaction (ORR), and to reduce the cost of proton exchange membrane fuel cells (PEMFCs). In recent years, heteroatom (N, B, and P) doped carbon nanostructures have been received enormous importance as a non-precious electrode materials for oxygen reduction. Doping of foreign atom into carbon is able to modify electronic properties of carbon materials. In this study, nitrogen and boron doped carbon nanostructures were synthesized by using a facile and cost-effective thermal annealing route and prepared nanostructures were used as a non-precious electrocatalysts for the ORR in alkaline electrolyte. The nitrogen doped carbon nanocapsules (NCNCs) exhibited higher activity than that of a commercial Pt/C catalyst, excellent stability and resistance to methanol oxidation. The boron-doped carbon nanostructure (BC) prepared at $900^{\circ}C$ showed higher ORR activity than BCs prepared lower temperature (800, $700^{\circ}C$). The heteroatom doped carbon nanomaterials could be promising candidates as a metal-free catalysts for ORR in the PEMFCs.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.105-110
• /
• 2012

In this paper, a yellow phosphor $Sr_3SiO_5:Eu^{2+}$ that emits efficiently at the 450 nm excitation for warm white LED is studied. In addition, the effects of various flux $BaF_2$, $NH_4Cl$ on the emission spectra were investigated. The samples were synthesized through conventional solid state reaction under reducing atmosphere of 95% $N_2$-5% $H_2$ mixture at the high temperature. All phosphors showed a excitation band from 450 nm and broad band emission peaking at region of 580 nm. The optimal concentration of $BaF_2$ flux is 3 wt% for $Sr_3SiO_5$ with doping 0.05mol Eu phosphors fired in a reductive atmosphere. The phosphor showed highest emission peaking at 582 nm.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.2
• /
• pp.8-13
• /
• 1999

In this paper, an analytical threshold voltage model is proposed by replacing the conventional GCA(Gradual Channel Approximation) with the assumption that a normal depletion layer width in the intrinsic region will vary quasi-linearly according to the channel direction. Derived threshold voltage expression is written as a function of the effective channel length, drain voltage, substrate bias voltage, substrate doping concentration, and the oxide thickness. Calculated results show almost similar trends with BSIM3v3's results in a satisfactory accuracy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.435-438
• /
• 2012

As lead-free piezoelectric materials, $Ag_2O$ doped $0.95(K_{0.5}Na_{0.5})NbO_3-0.05LiNbO_3+x$ mol% (where x = 0, 0.5, 1, 1.5, 2, 2.5 and 3, respectively) ceramics were fabricated by a conventional sintering process. The doping effects on the microstructure and electrical properties of the $0.95(K_{0.5}Na_{0.5})NbO_3-0.05LiNbO_3$ ceramics were systematically investigated. When the 3 mol % $Ag_2O$ doped $0.95(K_{0.5}Na_{0.5})NbO_3-0.05LiNbO_3$ samples were sintered at $1,080^{\circ}C$ for 5 hrs in air, these ceramics showed excellent values of density=4.20 $g/cm^3$, piezoelectric constant ($d_{33}$)=174 pC/N and phase transition temperature$(T_c)=421.6^{\circ}C$, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.384.1-384.1
• /
• 2014

대면적 그래핀을 합성하는 방법으로 주로 화학기상증작법, SiC 기판을 고온 열처리하는 방법 그리고 최근에는 고체소스를 활용하여 그래핀을 합성하는 방법 등이 보고되고 있다. 이에, 본 연구에서는 폴리머 용액들을 원하는 기판에 스핀코팅하여 건조시킨 후, 후 열처리 공정을 통해 그래핀을 합성하고 물성을 평가해보았다. 그래핀 합성을 위해서 사용된 폴리머 탄소원은 Vinyl계 폴리머 용액으로, polystyrene (PS), polyacrylonitrile (PAN), 그리고 polymethylmetacrylate (PMMA) 등으로 2wt%의 폴리머 용액을 $SiO_2$기판에 스핀 코팅을 하고, 그 위에 Nickel이나 Copper와 같은 catalytic metal을 capping layer로 증착하고, 고진공에서 후열처리 공정에 의해 그래핀을 성장하였다. 이때, 탄소원으로 쓰인 PS, PMMA 폴리머는 pristine graphene 합성을 위해, PAN 폴리머는 질소가 도핑된(n-type) 그래핀 합성을 위해 사용되었다. 그래핀의 물성은 폴리머 종류, 코팅된 두께, 촉매 금속층 종류와 두께, 그리고 후열처리 공정 온도와 시간에 따라서 조절이 가능하였다. 우리는 Raman spectroscopy, AFM, SEM 등을 활용하여 그래핀의 층수, 결함, 표면양상 등을 평가하였고, 또한 전사된 그래핀을 기반으로 제작된 FET의 게이트 전압에 따른 I-V 곡선을 측정하여 캐리어 종류 및 전하 이동도 등을 평가하였다. 더욱 상세한 내용은 프레젠테이션에서 논하겠다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.33-34
• /
• 2005

In this study, in odor to develop low temperature sintering multilayer piezoelectric actuator and ultrasonic vibrator, PMN-PNN-PZT ceramics were fabricated using $Li_2CO_3$ and $Na_2CO_3$ as sintering aids and their piezoelectric and dielectric characteristics were investigated according to the addition of dopant CuO and $Fe_2O_3$, respectively. The CuO added PMN-PNN-PZT ceramics improved mechanical quality factor Qm due to the acceptor doping effect. And also, $Fe_2O_3$ reacted as softner in this composition system in addition to the increase of grain size and sinterability. Taking into consideration electromechanical coupling factor kp of 0.62, dielectric constant $\varepsilon_r$, of 1275, Piezoelectric $d_{33}$ constant of 377[pC/N] and mechanical quality factor Qm of 975, it was concluded that the ceramics with the $Fe_2O_3$, added composition sintered at 900[$^{\circ}C$] were best for the multilayer piezoelectric actuator and ultrasonic vibrator application.

• Progress in Superconductivity
• /
• v.10 no.1
• /
• pp.35-39
• /
• 2008

By using the hybrid physical-chemical vapor deposition (HPCVD) technique, we have fabricated $MgB_2$ thick films on $Al_{2}O_3$ substrates with various impurity layers of Ni, Ti, and SiC. We have found a significant enhancement of the critical current density ($J_c$) for $MgB_2$ films grown on impurity layered substrates, indicating that additional impurity layers were provided as possible pinning sites by chemical doping in $MgB_2$ films. All samples doped by Ni, Ti, and SiC were observed to have high superconducting transition temperatures of 39 - 41 K. The $J_c$ of $MgB_2$ films grown on SiC impurity layered substrates showed three times higher than that of undoped films at high magnetic fields above 1 T.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.366-366
• /
• 2009

후면접합 태양전지는 상용 태양전지의 수평전류 손실(lateral current loss) 이 없으며, 전면전극에 의해 발생하는 그림자 손실(shading loss) 줄인 고효율 태양전지의 하나이다. 생성된 반송자가 후면에 위치한 전극에서 수집되기 때문에 효율향상을 위해서는 불순물에 의한 재결합을 줄이는 것이 중요하다. 따라서 Gettering 은 높은 소수반송자 수명(life-time)을 가지는 고품위 실리콘 기판은 고효율 실리콘태양전지 제작을 위한 중요 요소 기술이다. 본 연구에서는 n-type c-Si 기판을 이용한 고효율 실리콘 이종접합 태양전지제작을 위해 external gettering 공정을 이용하여 고품위 실리콘 기판을 제작하였다. POC13 doping process 의 온도, 시간을 변화시킴으로써 이에 따른 변화를 관찰하였다. 주사전자현미경(SEM)를 통해 etch pit 을 확인 했으며,Four point probe 를 통해 면저항을 측정, 인(P)의 농도를 계산 하였다. 계산된 면저항을 통해 인(P)의 확산 깊이를 계산하였다. Iodine passivation 된 시편을 Qusi-steady state photoconductance (QSSPC)를 이용하여 소수반송자 수명을 측정함으로써 gettering 에 의한 bulk lifetime 향상 효과를 관찰하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.171-171
• /
• 2012

Neutral beam assisted chemical vapor deposition (NBa-CVD) process has been developed as a nove,l room temperature deposition process for the light-soaking free nano-crystalline silicon (nc-Si) thin films including intrinsic and n-type doped thin film. During formation of nc-Si thin films by the NBa-CVD process with silicon reflector at room temperature, the energetic particles enhance doping efficiency and crystalline phase in nc-Si thin films without additional heating at substrate. The effects of incident NB energy controlled by the reflector bias have been confirmed by Raman spectra analysis. Additionally, TEM images show uniform nc-Si grains which imbedded amorphous phase without incubation layer. The nc-Si films by the NBa-CVD are hardly degenerated by light soaking; the degradations of photoconductivity were just a few percents before and after light irradiation.

• Current Photovoltaic Research
• /
• v.8 no.2
• /
• pp.60-65
• /
• 2020

In perovskite solar cells with planar heterojunction configuration, selection of proper charge-transporting layers is very important to achieve stable and efficient device. Here, we developed solution processible Cu doped NiO_x (Cu:NiO_x) thin film as a hole-transporting layer (HTL) in p-i-n structured methylammonium lead trihalide (MAPbI₃) perovskite solar cell. The transmittance and thickness of NiO_x HTL is optimized by control the spin-coating rate and Cu is additionally doped to improve the surface morphology of undoped NiO_x thin film and hole-extraction properties. Consequently, a perovskite solar cell containing Cu:NiO_x HTL with optimal doping ratio of Cu exhibits a power conversion efficiency of 14.6%.