• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1519-1526
• /
• 2023

For the first time Aluminium-BariumeZinc oxide nanocomposite (ZABONC) was synthesized by solution combustion method where calcination was carried out at low temperatures (600℃) to study the electromagnetic (EM) (X/γ) radiation shielding properties. Further for characterization purpose standard techniques like PXRD, SEM, UV-VISIBLE, FTIR were used to find phase purity, functional groups, surface morphology, and to do structural analysis and energy band gap determination. The PXRD pattern shows (hkl) planes corresponding to spinel cubic phase of ZnAl₂O4, cubic Ba(NO₃)₂, α and γ phase of Al₂O₃ which clearly confirms the formation of complex nano composite. From SEM histogram mean size of nano particles was calculated and is in the order of 17 nm. Wood and Tauc's relation direct energy band gap calculation gives energy gap of 2.9 eV. In addition, EM (X/γ) shielding properties were measured and compared with the theoretical ones using standard procedures (NaI (Tl) detector and multi channel analyzer MCA). For energy above 356 keV the measured shielding parameters agree well with the theory, while below this value slight deviation is observed, due to the influence of atomic/crystallite size of the ZABONC. Hence synthesized ZABONC can be used as a shielding material in EM (X/γ) radiation shielding.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권9호
• /
• pp.1334-1340
• /
• 2009

Sufficient food supply for all humans was, is, and will remain one of the main priorities for mankind. The choice between food from crops or animals is related to philosophical, religious and ethical, but also cultural and economical, values. However, the concept of sustainable agriculture takes into account the organization of food supply through future generations. Not only quantity, but also quality is important, especially in relation to food safety and the method of production. Specifically, the aspect of animal welfare is becoming increasingly important with the focus on stewardship and stockmanship, i.e. responsibility of humans for their animals. In the future, implications for sustainability in animal production may be of more concern to stewardship paired by stockmanship, responsibility, consciousness and morality. The moral as a basic concept of sustainable agriculture is to maintain continuous development in harmony with nature to meet requirements in the world for living creatures including human beings to live in and steward. The objective of this paper is to discuss the above issues from different viewpoints on sustainable food supply, increasing food consumption and environmental protection.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.151-176
• /
• 2017

This paper deals with general equations of motion for free vibration analysis response of thick three-layer doubly curved sandwich panels (DCSP) under simply supported boundary conditions (BCs) using higher order shear deformation theory. In this model, the face sheets are orthotropic laminated composite that follow the first order shear deformation theory (FSDT) based on Rissners-Mindlin (RM) kinematics field. The core is made of orthotropic material and its in-plane transverse displacements are modeled using the third order of the Taylor's series extension. It provides the potentiality for considering both compressible and incompressible cores. To find these equations and boundary conditions, Hamilton's principle is used. Also, the effect of trapezoidal shape factor for cross-section of curved panel element ($1{\pm}z/R$) is considered. The natural frequency parameters of DCSP are obtained using Galerkin Method. Convergence studies are performed with the appropriate formulas in general form for three-layer sandwich plate, cylindrical and spherical shells (both deep and shallow). The influences of core stiffness, ratio of core to face sheets thickness and radii of curvatures are investigated. Finally, for the first time, an optimum range for the core to face sheet stiffness ratio by considering the existence of in-plane stress which significantly affects the natural frequencies of DCSP are presented.

• Journal of Astronomy and Space Sciences
• /
• 제34권3호
• /
• pp.199-205
• /
• 2017

A high resolution spectroscopic observation of the red supergiant star RM_1-390 in the Large Magellanic Cloud was made from a 3.6 m telescope at the European Southern Observatory. Spectral resolving power was R=20,000, with a signal-to-noise ratio S/N > 100. We found the atmospheric parameters of RM_1-390 to be as follows: the effective temperature $T_{eff}=4,250{\pm}50K$, the surface gravity ${\log}\;g=0.16{\pm}0.1$, the microturbulent velocity $v_{micro}=2.5km/s$, the macroturbulence velocity $v_{macro}=9km/s$ and the iron abundance $[Fe/H]=-0.73{\pm}0.11$. The abundances of 18 chemical elements from silicon to thorium in the atmosphere of RM_1-390 were found using the spectrum synthesis method. The relative deficiencies of all elements are close to that of iron. The fit of abundance pattern by the solar system distribution of r- and s-element isotopes shows the importance of the s-process. The plot of relative abundances as a function of second ionization potentials of corresponding chemical elements allows us to find a possibility of convective energy transport in the photosphere of RM_1-390.

• Toxicological Research
• /
• 제29권3호
• /
• pp.211-215
• /
• 2013

The trace toxic metal copper was assayed using mercury immobilized on a carbon nanotube electrode (MCW), with a graphite counter and a reference electrode. In this study, a macro-scale convection motor was interfaced with a MCW three-electrode system, in which a handmade MCW was optimized using cyclic- and square-wave stripping voltammetry. An analytical electrolyte for tap water was used instead of an expensive acid or base ionic solution. Under these conditions, optimum parameters were 0.09 V amplitude, 40 Hz frequency, 0.01 V incremental potential, and a 60-s accumulation time. A diagnostic working curve was obtained from 50.0 to 350 ${\mu}g/L$. At a constant Cu(II) concentration of 10.0 ${\mu}g/L$, the statistical relative standard deviation was 1.78% (RSD, n = 15), the analytical accumulation time was only 60 s, and the analytical detection limit approached 4.6 ${\mu}g/L$ (signal/noise = 3). The results were applied to non-treated drinking water. The content of the analyzed copper using 9.0 and 4.0 ${\mu}g/L$ standards were 8.68 ${\mu}g/L$ and 3.96 ${\mu}g/L$; statistical values $R^2$ = 0.9987 and $R^2$ = 0.9534, respectively. This method is applicable to biological diagnostics or food surveys.

• Advances in Traditional Medicine
• /
• 제8권2호
• /
• pp.164-170
• /
• 2008

The hepatoprotective activity of the alcoholic extract of Rosa damascena was studied against paracetamol induced acute hepatotoxicity in rats. Liver damage was assessed by estimating serum enzyme activities of aspartate aminotransferase, alanine aminotransferase, alkaline phosphatase and histopathology of liver tissue. Pre- and post-treatment with ethanolic extracts showed a dose-dependent reduction of paracetamol induced elevated serum levels of enzyme activity. The mechanism underlying the protective effects was assayed in vitro and the R. damascena extracts displayed dosedependent free radical activity using DPPH ($IC_{50}=162.525\;{\mu}g/ml$) and TBA method. The hepatoprotective action was confirmed by histopathological observation. The ethanolic extracts reversed paracetamol induced liver injury. These results suggest that the hepatoprotective effects of R. damascena extracts are related to its antioxidative activity.

• Natural Product Sciences
• /
• 제26권3호
• /
• pp.236-243
• /
• 2020

Salvia plebeia R. Br. is a plant which has been used as an edible crop and traditional medicine in Asian countries. In this study, HPLC-PDA analysis and countercurrent chromatography (CCC) coupled with reversed-phase (RP) HPLC method were applied to isolate ten isolates from 3.3 g of n-butanol soluble extract from hot-water extract of S. plebeia. The use of CCC enabled us to efficiently fractionate the starting material with less sample loss and facilitate the isolation of compounds from S. plebeia extract using RP-HPLC. The isolates were determined to be caffeic acid (1), 6-hydroxyluteolin 7-O-β-D-glucoside (2), eudebeiolide B (3), (R)-rosmarinic acid (4), homoplantaginin (5), eudebeiolide D (6), plebeiolide C (7), salpleflavone (8), eupafolin (9) and hispidulin (10) based on the spectroscopic evidence.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.8-14
• /
• 2006

The important function of Ball-Stop part is to operate power shift using suitable pneumatic force for vehicle with more than 5 ton when a driver changes gear. In this paper, we have applied the concept of the DFSS(Design for Six Sigma) to robust design of Ball-Stop part. First, we have found the control factors which could mainly influence the performance of the Ball-Stop part. The simulations of contact between head and detent pin was performed to evaluate effect of control factors according to DOE(Design of experiment) by using $ADAMS^{(R)}$. Finally, we have obtained optimal levels of each factors using $MINITAB^{(R)}$. Through the comparison of the result of optimized design with one of inintial design, we have verified the usefulness of DFSS method which can be applied to robust design of mechanical systems.

• 디지털산업정보학회논문지
• /
• 제10권3호
• /
• pp.237-247
• /
• 2014

This paper describes a 2D discrete-time wavelet transform for which the Q-factor is easily specified. Hence, the transform can be tuned according to the oscillatory behavior of the image signal to which it is applied. The tunable Q-factor wavelet transform (TQWT) is a fully-discrete wavelet transform for which the Q-factor, Q, of the underlying wavelet and the asymptotic redundancy (over-sampling rate), r, of the transform are easily and independently specified. In particular, the specified parameters Q and r can be real-valued. Therefore, by tuning Q, the oscillatory behavior of the wavelet can be chosen to match the oscillatory behavior of the signal of interest, so as to enhance the sparsity of a sparse signal representation. The TQWT is well suited to fast algorithms for sparsity-based inverse problems because it is a Parseval frame, easily invertible, and can be efficiently implemented. The TQWT can also be used as an easily-invertible discrete approximation of the continuous wavelet transform. The transform is based on a real valued scaling factor (dilation-factor) and is implemented using a perfect reconstruction over-sampled filter bank with real-valued sampling factors. The transform is parameterized by its Q-factor and its oversampling rate (redundancy), with modest oversampling rates (e. g. 3-4 times overcomplete) being sufficient for the analysis/synthesis functions to be well localized. Therefore, This method services good performance in image processing fields.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.94-97
• /
• 2004

Step-edge Josephson junctions (SEJ) have been fabricated on sapphire substrates with in situ deposited films of CeO$_2$ buffer layer and YBa$_2$Cu$_3$O$_{7}$ films on the low angle steps. Direct coupled SQUID magnetometers with the SEJ were formed on 1 cm X 1 cm R-plane sapphire substrates. Typical 5-${\mu}{\textrm}{m}$-wide Josephson junctions have R$_{N}$ of 3 Ω and I$_{c}$ of 50 $mutextrm{A}$ at 77 K. The direct coupled SQUID magnetometers were designed to have pickup coils of 50-${\mu}{\textrm}{m}$-wide 16 parallel loops on the 1 cm X 1 cm substrates with outer dimension of 8.8 mm X 8.8 mm. The SEJ SQUID magnetometers exhibit relatively low 1/f noise even with dc bias control, and could be stably controlled by flux-locked loops in the magnetically disturbed environment. Field noise of the do SQUID was measured to be 200∼300 fT/Hz$^{1}$2/in the white noise region and about 2 pT/Hz$^{1}$2/ at 1 Hz when measured with dc bias method.hod.d.