• Title/Summary/Keyword: N-R Method

Search Result 1,650, Processing Time 0.03 seconds

Characteristics of Bearing Capacity under Square Footing on Two-layered Sand (2개층 사질토지반에서 정방형 기초의 지지력 특성)

  • 김병탁;김영수;이종현
    • Journal of the Korean Geotechnical Society
    • /
    • v.17 no.4
    • /
    • pp.289-299
    • /
    • 2001
  • 본 연구는 균질 및 2개층 비균질지반에서 사질토지반 상에 놓인 정방형 기초의 극한지지력과 침하에 대하여 고찰하였다. 본 연구는 얕은기초의 거동에 대한 정방형 기초의 크기, 지반 상대밀도, 기초 폭에 대한 상부층의 두께 비(H/B), 상부층 아래 경계면의 경사($\theta$) 그리고 지반강성비의 영향을 규명하기 위하여 모형실험을 수행하였다. 동일 상대밀도에서 지지력 계수($N_{{\gamma}}$)는 일정하지 않으며 기초 폭에 직접적으로 관련되며 지지력계수는 기초 폭이 증가함에 따라 감소하였다. 기초크기의 영향과 구속압력의 영향을 고려하는 Ueno 방법에 의한 극한지지력의 예측값은 고전적인 지지력 산정식보다 더 잘 일치하며 그 값은 실험값의 65% 이상으로 나타났다. $\theta$=$0^{\circ}$인 2개층 지반의 결과에 근거하여, 극한지지력에 대한 하부층 지반의 영향을 무시할 수 있는 한계 상부층 두께는 기초 폭의 2배로 결정되었다. 그러나, 73%의 상부층 상대밀도인 경우는 침하비($\delta$B) 0.05 이하에서만 이 결과가 유효하였다. 경계면이 경사진 2개층 지반의 결과에 근거하여, 상부층의 상대밀도가 느슨할수록 그리고 상부층의 두께가 클수록 극한지지력에 대한 경계면 경사의 영향은 크지 않는 것으로 나타났다. 경계면의 경사가 증가함에 따른 극한침하량의 변화는 경계면이 수평인 경우($\theta$=$0^{\circ}$)를 기준으로 0.82~1.2(상부층 $D_{r}$=73%인 경우) 그리고 0.9~1.07(상부층 $D_{r}$=50%인 경우) 정도로 나타났다.Markup Language 문서로부터 무선 마크업 언어 문서로 자동 변환된 텍스트를 인코딩하는 경우와 같이 특정한 응용 분야에서는 일반 문자열에 대한 확장 인코딩 기법을 적용할 필요가 있을 수 있다.mical etch-stop method for the etching of Si in TMAH:IPA;pyrazine solutions provides a powerful and versatile alternative process for fabricating high-yield Si micro-membranes. the RSC circle, but also to the logistics system in the SLC circle. Thus, the RSLC model can maximize combat synergy effects by integrating the RSC and the SLC. With a similar logic, this paper develops "A Revised System of Systems with Logistics (RSSL)" which combines "A New system of Systems" and logistics. These tow models proposed here help explain several issues such as logistics environment in future warfare, MOE(Measure of Effectiveness( on logistics performance, and COA(Course of Actions) for decreasing mass and increasing velocity. In particular, velocity in logistics is emphasized.

  • PDF

Anti-apoptotic and neuroprotective effects of acupuncture techniques of tonification or sedation at LR3 on focal brain ischemic injury induced by intraluminal filament insertion in rats (태위(太衝)(LR3)에 대한 영수(迎隨)및 염전보사(捻轉補瀉)가 intraluminal filament 삽입술(揷入術)에 의하여 유발(誘發)된 백서(白鼠)의 focal ischemia에 미치는 영향(影響))

  • Park, Jong-Seung;Na, Chang-Su;Cho, Myeng-Rae;Jung, Yeon-Jin;Jeong, Ji-Yeon;Kim, Won-Jae;Choi, Chan-Hun;Youn, Dae-Hwan
    • Korean Journal of Acupuncture
    • /
    • v.23 no.3
    • /
    • pp.81-98
    • /
    • 2006
  • Objectives : Acupuncture using a tonification or sedation techniques method is used as a controlling the medication for an early stroke in the Korean medicine. LR3 has indicatons of headache, vertigo, facial paralysis, apoplexy, epiepsy as the source acupoint of a liver meridian. So this study is aims to investigate the anti-apoptotic and neuroprotective effects of acupuncture on the focal ischemia induced by intraluminal filament insertion in rats. Methods : The focal ischemia was induced by intraluminal filament insertion into middle cerebral artery. The animals were divided into seven groups (n=8 in each group) : Normal, intactness group; Conrol group, no therapy group after being ischemia induced; MA-l, acupuncture perpendicularly without Tonification or Sedation techniques at LR3 after being ischemia induced; MA-2, acupuncture obliquely towards the knee at LR3 after being ischemia induced; MA-3, acupuncture obliquely towards the toe at LR3 after being ischemia induced; MA-4, acupuncture obliquely towards the knee and rotate 9 times in a clockwise direction at LR3 after being ischemia induced; MA-5, acupuncture obliquely towards the toe and rotate 6 times in a counterclockwise direction at LR3 after being ischemia induced. The anti-apoptotic and neuroprotective effects of Acupuncture techniques of tonification or sedation at LR3 are observed by mGluR5, Bax, Cresyl violet, ChAT-stain and NGF. Results : The intensity of mGluR5 and the density of ChAT was increased in MA-1 group. The intensity of Bax was decreased in MA-3, MA-4 group. The density of neurons stained by Cresyl violet and ChAT was increased in MA-2, MA-3, MA-4, MA-5 group. The density of neurons stained by NGF was only increased in MA-4 group. Conclusions : Our study suggests that acupuncture perpendicularly without Tonification or Sedation techniques and obliquely towards the knee and rotate 9 times in a clockwise direction(Tonifying technique) at LR3 after being ischemia induced at LR3 shows anti-apoptotic and neuroprotective effects on cholinergic neuron in focal cerebral ischemia of the stroke in rats.

  • PDF

Investigations on Rock Cliff Development in Dunduri, West coast of Korea, Using Schmidt Hammer Rebound Values and OSL Chronology (슈미트해머 반발도와 OSL 연대에 기반한 둔두리 해식애의 형성과정)

  • CHOI, Kwang Hee;SEONG, Yeong Bae;CHOI, Jeong-Heon;JUNG, Pil Mo;LEE, Soo Yong
    • Journal of The Geomorphological Association of Korea
    • /
    • v.20 no.1
    • /
    • pp.45-56
    • /
    • 2013
  • Rock strength test on Dunduri cliff, Chungnam province, Korea, was performed using N-type Schmidt hammer and the depositional ages of the sediments overlying the cliff were derived using OSL dating method. The averaged R-values of the cliffs investigated here were lower than those observed from the shore platforms, but with larger scatter in the former. R-values were negatively correlated to cliff face retreat, implying that the irregularity of the coastal rock faces was closely related to lithology as the weaker rocks retreated much faster than the harder rocks. The overlying deposit of the cliff tends to be thicker at valleys and were poorly sorted with angular to subangular clasts in a matrix of silt. The OSL ages (ca. 70-77 ka) presented here were older than the previously reported exposure ages (ca. 7-30 ka) of the cliff face. Therefore, it is likely that the present sea cliff was developed by expansion of the platform which had been covered by slope deposits since the last interglacial and exposed again during the Holocene.

A Design and Effect of Design Thinking-Based Team Project Learning in Nursing Clinical Practice (간호학 임상실습에서 디자인씽킹 기반 팀 프로젝트 학습 설계 및 적용효과)

  • Kang, Myung-Ju;Chung, Kyung-Hee;Cho, Jeong-Ah
    • The Journal of the Korea Contents Association
    • /
    • v.19 no.3
    • /
    • pp.336-348
    • /
    • 2019
  • This study aimed to verify the effects of design thinking-based team project learning on nursing college students' empathy and proactivity of problem solving. This study also examined the subjects' experiences obtained from participating in team project activity through reflective analysis. The research was a one-group, pre-and-posttest design. The subjects were 64 seniors majoring in nursing studies in N university who had attended the course of nursing management practice. During the course, they participated in a design thinking team project for a total of 10 sessions for two weeks, five times per week, and one and a half hour per day. Data was analyzed using SPSS Win 22.0, a paired t-test was conducted and Pearson's correlation coefficients were calculated. Content analysis was carried out on their experiences obtained from participation in team project activity. The subjects' empathy(t=-2.94, p=.005) and proactivity of problem solving(t=-6.23, p<.001) showed statistically significant difference between before and after the design thinking-based team project learning and had significant positive correlation(r=.634, p<.001). Analysis of team reflection revealed four themes: design thinking, empathy, problem solving ability, and critical thinking. This study verified that design thinking-based team project learning was very effective in developing nursing college students' empathy and proactivity of problem solving. Research Results Design Thinking Based on team learning, project learning is an effective teaching learning method for finding and defining customer needs, creating a solution to problems, and enhancing engagement and empathy through various stakeholder collaborations I could.

Enhancement of durability of tall buildings by using deep-learning-based predictions of wind-induced pressure

  • K.R. Sri Preethaa;N. Yuvaraj;Gitanjali Wadhwa;Sujeen Song;Se-Woon Choi;Bubryur Kim
    • Wind and Structures
    • /
    • v.36 no.4
    • /
    • pp.237-247
    • /
    • 2023
  • The emergence of high-rise buildings has necessitated frequent structural health monitoring and maintenance for safety reasons. Wind causes damage and structural changes on tall structures; thus, safe structures should be designed. The pressure developed on tall buildings has been utilized in previous research studies to assess the impacts of wind on structures. The wind tunnel test is a primary research method commonly used to quantify the aerodynamic characteristics of high-rise buildings. Wind pressure is measured by placing pressure sensor taps at different locations on tall buildings, and the collected data are used for analysis. However, sensors may malfunction and produce erroneous data; these data losses make it difficult to analyze aerodynamic properties. Therefore, it is essential to generate missing data relative to the original data obtained from neighboring pressure sensor taps at various intervals. This study proposes a deep learning-based, deep convolutional generative adversarial network (DCGAN) to restore missing data associated with faulty pressure sensors installed on high-rise buildings. The performance of the proposed DCGAN is validated by using a standard imputation model known as the generative adversarial imputation network (GAIN). The average mean-square error (AMSE) and average R-squared (ARSE) are used as performance metrics. The calculated ARSE values by DCGAN on the building model's front, backside, left, and right sides are 0.970, 0.972, 0.984 and 0.978, respectively. The AMSE produced by DCGAN on four sides of the building model is 0.008, 0.010, 0.015 and 0.014. The average standard deviation of the actual measures of the pressure sensors on four sides of the model were 0.1738, 0.1758, 0.2234 and 0.2278. The average standard deviation of the pressure values generated by the proposed DCGAN imputation model was closer to that of the measured actual with values of 0.1736,0.1746,0.2191, and 0.2239 on four sides, respectively. In comparison, the standard deviation of the values predicted by GAIN are 0.1726,0.1735,0.2161, and 0.2209, which is far from actual values. The results demonstrate that DCGAN model fits better for data imputation than the GAIN model with improved accuracy and fewer error rates. Additionally, the DCGAN is utilized to estimate the wind pressure in regions of buildings where no pressure sensor taps are available; the model yielded greater prediction accuracy than GAIN.

Establishment of an Analytical Method for Determination of Fungicide Oxathiapiprolin in Agricultural Commodities using HPLC-UV Detector (HPLC-UVD를 이용한 농산물 중 살균제 Oxathiapiprolin의 잔류분석법 확립)

  • Jang, Jin;Kim, Heejung;Do, Jung Ah;Ko, Ah-Young;Lee, Eun Hyang;Ju, Yunji;Kim, Eunju;Chang, Moon-Ik;Rhee, Gyu-Seek
    • Journal of Food Hygiene and Safety
    • /
    • v.31 no.3
    • /
    • pp.186-193
    • /
    • 2016
  • An analytical method was developed for the determination of oxathiapiprolin in agricultural commodities. Oxathiapiprolin is a new oomycide (fungicide of piperidinyl thiazole isoxazoline class) which controls downy mildew in cucurbits caused by Pseudoperonospora cubensis (oomycete plant pathogen). Agricultural commodities were extracted with acetonitrile and partitioned with dichloromethane to remove the interference, adjusting pH between 9 and 10 by 1 N sodium hydroxide. After purification by silica SPE cartridge to clean up the interference of organic compounds, they were finally quantified by HPLC-UVD (high performance liquid chromatograph ultraviolet detector) using a wavelength at 260 nm and confirmed by LC-MS (liquid chromatograph mass spectrometer) in electro-spray ionization positive ion mode. The standard calibration curve was linear with coefficients of determination ($r^2$) 1.00 over the calibration ranges (0.025-2.5 mg/L). Recoveries were ranged between 86.7 to 112.7%, with relative standard deviations less than 10% at three concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates. The overall results were determined and estimated according to the CODEX guidelines (CAC/GL40). The proposed method for determination of oxathiapiprolin residues in agricultural commodities can be used as an official method.

Development of Analytical Method for Kasugamycin in Agricultural Products using LC-MS/MS (LC-MS/MS를 이용한 농산물 중 Kasugamycin 시험법 개발)

  • Lee, Han Sol;Do, Jung-Ah;Park, Ji-Su;Cho, Sung Min;Shin, Hye-Sun;Jang, Dong Eun;Jung, Yong-hyun;Lee, Kangbong
    • Journal of Food Hygiene and Safety
    • /
    • v.34 no.3
    • /
    • pp.235-241
    • /
    • 2019
  • An analytical method was developed for the determination of an antibiotic fungicide, kasugamycin, in agricultural products (hulled rice, potato, soybean, mandarin and green pepper) using liquid chromatographytandem mass spectrometry (LC-MS/MS). Samples were extracted with methanol adjusted to pH 13 using 1 N sodium hydroxide, and purified with a HLB (hydrophilic lipophilic balance) cartridge. Linearity of a matrix-matched calibration curve using seven concentration levels, from 0.001 to 0.1 mg/kg, was excellent with a correlation coefficient ($R^2$) of more than 0.9998. The limits of detection (LOD) and quantification (LOQ) of instrument were 0.0005 and $0.001{\mu}g/mL$, respectively, and the LOQ of analytical method calculated as 0.01 mg/kg. The average recoveries at three spiking levels (LOQ, $LOQ{\times}10$, $LOQ{\times}50$, n=5) were in the range of 71.2~95.4% with relative standard deviation of less than 12.1%. The developed method was simple and all optimized results was satisfied with the criteria ranges requested in the Codex guidelines and Food Safety Evaluation Department guidelines. The present study could be served as a reference for the establishment of maximum residue limits (MRL) of kasugamycin and be used as basic data for safety management relative to kasugamycin residues in imported and domestic agricultural products.

Analysis on the Correlation Between Vegetation Structure and Environment Factors of the Geumosanseong-inside in Geumosan Provincial Park, in Korea (금오산도립공원의 금오산성 식생구조와 환경요인의 상관관계 분석)

  • Kim, Hyoun-Sook;Park, Gwan-Soo;Lee, Sang-Myong;Lee, Joong-Ku
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.23 no.2
    • /
    • pp.49-67
    • /
    • 2020
  • This study was conducted to compare and analyze forest vegetation distributed in Geumosanseong-inside in Geumosan Provincial Park from 2017.10 to 2019.6. The vegetation structure was classified by the phytosociological method and TWINSPAN and the correlation between the community structure and the environmental factors was analyzed using DCCA ordination analydsis. The vegetation structures are Quercus mongolica, Fraxinus mandshurica, Q. acutissima, Larix leptolepis, Prunus padus and Morus alba community by the phytosociological method and 16 communities under TWINSPAN. The importance value of Q. mongolica(64.5) was the highest, and followed by F. mandshurica, L. leptolepis, Acer pseudosieboldianum, M. alba, P. padus, Q. acutissima, Sorbus alnifolia, P. serrulata var. pubescens, F. sieboldiana, Rhododendron schlippenbachii and Castanea crenata which is consistent with species having the dominance status by analysis of the vegetation structure. As the results of DBH analysis for taxon with high importance values, Q. mongolica and M. alba represented normal distribution, and thus, the dominance status of these species is likely to continue. L. leptolepis will maintain the dominance status due to high density of large individuals as compared with species above medium size. However, it will decrease because of high mortality after increase in age class. F. mandshurica and P. padus continue to show dominance status due to high density of young individuals as compared with species above medium size. Q. acutissima have high density of individuals above intermediate size and low density of young individuals, and thus, will maintain the dominance status. A. pseudosieboldianum, F. sieboldiana and R.schlippenbachii which are arborescent will present continuously high dominance status because of high density of young individuals. Soil analysis shows that whereas pH, Ca2+ and Mg2+ in the research area were lower than the average values of overall forest soil and O.M, T-N, C.E.C and P2O5 were higher. We expected that these results were due to agricultures until 50 years ago in Geumosanseong-inside. As a result of DCCA ordination analysis using eleven environmental factors and communities classified by the phytosociological method analysis showed that Q. mongolica was distributed in the environment with higher elevation and O.M and steep slope, and lower P2O5, Mg2+ and Ca2+. In contrast to F. mandshurica, Q. acutissima was distributed in higher K+ and lower pH. L. leptolepsis was distributed in various environment.

Effects of the Introduction of UV Irradiation and Rapid Thermal Annealing Process to Sol-Gel Method Derived Ferroelectric Sr0.9Bi2.1Ta1.8Nb0.2O9 Thin Films on Crystallization and Dielectric/Electrical Properties (UV 노광과 RTA 공정의 도입이 Sol-Gel 법으로 제조한 강유전성 Sr0.9Bi2.1Ta1.8Nb0.2O9 박막의 결정성 및 유전/전기적 특성에 미치는 영향)

  • 김영준;강동균;김병호
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.17 no.1
    • /
    • pp.7-15
    • /
    • 2004
  • The ferroelectric SBT thin films as a material of capacitors for non-volatile FRAMs have some problems that its remanent polarization value is relatively low and the crystallization temperature is quite high abovc 80$0^{\circ}C$. Therefore, in this paper, SBTN solution with S $r_{0.9}$B $i_{2.1}$T $a_{1.8}$N $b_{0.2}$$O_{9}$ composition was synthesized by sol-gel method. Sr(O $C_2$ $H_{5}$)$_2$, Bi(TMHD)$_3$, Ta(O $C_2$ $H_{5}$)$_{5}$and Nb(O $C_2$ $H_{5}$)$_{5}$ were used as precursors, which were dissolved in 2-methoxyethanol. SBTN thin films with 200 nm thickness were deposited on Pt/Ti $O_2$/ $SiO_2$/Si substrates by spin-coating. UV-irradiation in a power of 200 W for 10 min and rapid thermal annealing in a 5-Torr-oxygen ambient at 76$0^{\circ}C$ for 60 sec were used to promote crystallization. The films were well crystallized and fine-grained after annealing at $650^{\circ}C$ in oxygen ambient. The electrical characteristics of 2Pr=11.94 $\mu$C/$\textrm{cm}^2$, Ps+/Pr+=0.54 at the applied voltage of 5 V were obtained for a 200-nm-thick SBTN films. This results show that 2Pr values of the UV irradiated and rapid thermal annealed SBTN thin films at the applied voltage of 5 V were about 57% higher than those of no additional processed SBTN thin films. thin films.lms.s.s.

Production of In-Vivo Embryos by Superovulation and Result of Transfer with Fresh or Frozen Embryos for Hanwoo and Holstein Cattle (한우 및 젖소에서 과배란 처리를 이용한 체내수정란 생산과 신선 및 동결 수정란 이식 결과)

  • Kim Y. J.;Song J. W.;Seo S. H.;Jeong K. N.;Kim Y. S.;Lee H. R.;Shin D. S.;Jo S. W.;Kim S. H.
    • Journal of Embryo Transfer
    • /
    • v.19 no.3
    • /
    • pp.209-218
    • /
    • 2004
  • To investigate the feasibility of embryo transfer technology to promote productivity of cattle, 36 cows(18 Holstein, 18 Hanwoo) were superovulated. Fresh embryos were transferred to 25 recipients(14 Holstein, 11 Hanwoo), whereas frozen embryos were transferred to 17 recipients(10 Holstein, 7 Hanwoo). Two embryos were transferred at a time to 13 recipients(9 Holstein, 4 Hanwoo) to produce twin calves. 1. 75.0% of donor cattle were reacted to hormonal treatment far superovulation. 2. The rate of embryo recovery by non-surgical method for Holstein and Hanwoo was 90.4 and 95.8% in comparison with numbers of corpus luteum. 3. Of all the ova collected non-surgically, the rate of viable blastocyst was 66.4% and the rate of transferrable blastocysts was 48.6%. 4. The rate of embryo collection by one-catheter method was 75.0%. 5. The rate of pregnancy/delivery following embryo transfer with fresh embryos was 60.0%. 6. The rate of pregnancy/delivery following embryo transfer with frozen embryos was 35.3%. 7. In embryo transfer to produce twin calves, the rate of pregnancy/delivery was 28.6% with fresh embryos and 16.7% with frozen embryos.