• 한국환경농학회지
• /
• 제39권3호
• /
• pp.246-252
• /
• 2020

BACKGROUND: Pesticides are broadly used to control weeds and pests, and the residues remaining in crops are managed in accordance with the MRLs (maximum residue limits). Therefore, an analytical method is required to quantify the residues, and we conducted a series of analyses to select and validate the quick and simple analytical method for tolpyralate in five agricultural products using QuEChERS (quick, easy, cheap, effective, rugged and safe) method and LC-MS/MS (liquid chromatography-tandem mass spectrometry). METHODS AND RESULTS: The agricultural samples were extracted with acetonitrile followed by addition of anhydrous magnesium sulfate, sodium chloride, disodium hydrogencitrate sesquihydrate and trisodium citrate dihydrate. After shaking and centrifugation, purification was performed with d-SPE (dispersive-solid phase extraction) sorbents. To validate the optimized method, its selectivity, linearity, LOD (limit of detection), LOQ (limit of quantitation), accuracy, repeatability, and reproducibility from the inter-laboratory analyses were considered. LOQ of the analytical method was 0.01 mg/kg at five agricultural products and the linearity of matrix-matched calibration were good at seven concentration levels, from 0.0025 to 0.25 mg/L (R²≥0.9980). Mean recoveries at three spiking levels (n=5) were in the range of 85.2~112.4% with associated relative standard deviation values less than 6.2%, and the coefficient of variation between the two laboratories was also below 13%. All optimized results were validated according to the criteria ranges requested in the Codex Alimentarius Commission (CAC) and Ministry of Food and Drug Safety (MFDS) guidelines. CONCLUSION: In conclusion, we suggest that the selected and validated method could serve as a basic data for detecting tolpyralate residue in imported and domestic agricultural products.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.440-443
• /
• 2002

Present1y the X-Ray diagnosis system is a real condition that is changing by digital ways in it's existent analog ways. This digital radiation detector is divided by the direct method and the indirect method. The indirect method of applied voltage has special qualities that the resolution is low than direct method by diffusion effect that happens. The conversion process ( radiation${\rightarrow}$visible ray${\rightarrow}$electrical signal of two times, has shortcomings that the energy conversion efficiency of electrical signal is low. The direct method has shortcomings that need strong electric fie1d to detect electrical signal efficiently. This research achieved to develop digital detector of the Hybrid method that have form that mixes two ways to supplement shortcoming of direct. indirect method. A studied electrical characteristic by Iodine's Mixture ratio change is added to selenium in the detector which has a multi-layer structure (Oxybromide + a-Se). There are 8 kinds of Manufactured compositions to amorphous selenium Iodine each 30ppm, 100ppm, 200 ppm, 300ppm, 400ppm, 500ppm, 600ppm, 700ppm by a doped photoconductor through a vacuum thermal evaporation method. The phosphor layer is consisted of Oxybromide ($BrO_2$) which uses optical adhesives multi-layer structure. The manufactured compositions calculates and compares Net Charge and signal to noise ratio measuring Photocurrent about Darkcurrent and X-ray. When doped Iodine Mixture ratio is 500ppm to the multi-layer structure (Oxybromide + a-Se), applied voltage of $3V/{\mu}m$, leakage current of compositions $2.61nA/cm^2$ and net charge value by 764pC/$cm^2$/mR then the best result appeared.

• Structural Engineering and Mechanics
• /
• 제31권2호
• /
• pp.181-210
• /
• 2009

This paper presents the theoretical developments of an exact finite strip for the buckling and initial post-buckling analyses of isotropic flat plates. The so-called exact finite strip is assumed to be simply supported out-of-plane at the loaded ends. The strip is developed based on the concept that it is effectively a plate. The present method, which is designated by the name Full-analytical Finite Strip Method in this paper, provides an efficient and extremely accurate buckling solution. In the development process, the Von-Karman's equilibrium equation is solved exactly to obtain the buckling loads and the corresponding form of out-of-plane buckling deflection modes. The investigation of thin flat plate buckling behavior is then extended to an initial post-buckling study with the assumption that the deflected form immediately after the buckling is the same as that obtained for the buckling. It is noted that in the present method, only one of the calculated out-of-plane buckling deflection modes, corresponding to the lowest buckling load, i.e., the first mode is used for the initial post-buckling study. Thus, the postbuckling study is effectively a single-term analysis, which is attempted by utilizing the so-called semi-energy method. In this method, the Von-Karman's compatibility equation governing the behavior of isotropic flat plates is used together with a consideration of the total strain energy of the plate. Through the solution of the compatibility equation, the in-plane displacement functions which are themselves related to the Airy stress function are developed in terms of the unknown coefficient in the assumed out-of-plane deflection function. These in-plane and out-of-plane deflected functions are then substituted in the total strain energy expressions and the theorem of minimum total potential energy is applied to solve for the unknown coefficient. The developed method is subsequently applied to analyze the initial postbuckling behavior of some representative thin flat plates for which the results are also obtained through the application of a semi-analytical finite strip method. Through the comparison of the results and the appropriate discussion, the knowledge of the level of capability of the developed method is significantly promoted.

• 대한방사선기술학회지:방사선기술과학
• /
• 제26권2호
• /
• pp.37-42
• /
• 2003

목 적 : 전산화 단층촬영장치는 방사선을 이용한 질병의 진단에 중추적인 역할을 하는 장비이다. 시대의 흐름과 과학기술의 발달로 전산화 단층촬영장치도 그 발전을 거듭해왔고 앞으로도 전산화 단층촬영장치를 이용한 검사는 더욱더 증가하리라 생각된다. 검사의 증가와 함께 산란선에 노출될 기회가 많아질 것이라는 생각 또한 사실이다. 이에 전산화 단층촬영실의 제어실내 환자 보기창 앞과 환자 및 보호자들이 출입하는 출입문 외측 그리고 환자 검사 시 촬영실내에서의 산란선 발생률을 측정하였고 산란선의 피폭을 가장 최소화 할 수 있는 방법을 알아보고자 하였다. 대상 및 방법 : 2001년 11월부터 서울소재 13개 종합병원 및 대학병원에 설치 운용중인 전산화 단층촬영장치 25를 대상으로 하였다. 촬영조건은 피폭선량 측정시 제조업소에서 권고 하고있는 촬영조건을 사용하였고, 이때 피사체는 피폭선량 측정용 DALI CT 피폭선량 측정용 두부용 팬톰(${\phi}16\;cm$ Plexglas)과 복부용 팬톰(${\phi}32\;cm$ Plexglas)을 사용하였다. 산란선의 측정은 환경방사선 측정용 Survey Meter인 Radical Corporation, model $20{\times}5-1800$, Electrometer/Ion chamber, S/N 21740에 Reader(Radiation Monitor Controller model 2026)과 G-M Survey를 이용하였다. 산란선의 측정위치는 전산화 단층촬영실에서 방사선 작업종사자가 주로 활동하는 제어실내 환자 보기창 앞과 환자 및 보호자들이 출입하는 출입문 외측 그리고 피사체 스캔시 등선량중심점(isocenter)으로부터 100 cm되는 지점에서 측정하였다. 결 과 : 각 병원에서 설치 운용중인 전산화 단층촬영실내 작업환경은 해당병원의 상황에 따라 많은 차이를 보이고 있었고 산란선의 발생유무는 다음과 같았다. 1) 전산화 단층촬영장치의 등선량중심점(isocenter)에서부터 제어실내 환자 보기창 사이의 거리는 평균 377 cm이였고 이때 산란선은 거의 검출되지 않은 곳에서부터 약 100 mR/week까지 다양한 분포를 보였으나 주당 허용선량인 $2.58{\times}10^{-5}\;C/kg$(100 mR/week)이내의 조건을 만족하고 있었다. 2) 전산화 단층촬영장치의 등선량중심점(isocenter)에서부터 환자 및 보호자가 출입하는 출입문 외측까지의 거리는 평균 439cm이었고, 이때 산란선은 거의 검출되지 않은 곳부터 다양한 분포를 보였으나 대부분의 병원에서 주당허용선량인 $2.58{\times}10^{-6}\;C/kg$(10 mR/week)이내의 조건을 만족하고 있었다. 3) 피사체를 스캔할 때 등선량중심점(isocenter)에서부터 100 cm되는 곳에서의 산란선량은 장비에 따라 많은 차이가 있었다. 결 론 : 진단용 방사선발생장치에서 전산화 단층촬영장치의 이용은 나날이 증가하고 있고 다른 일반 X-선 촬영과 비교했을 때 진단영역이 매우 높지만 방사선으로 인한 피폭과 산란선에 노출될 가능성이 매우 높다. 전산화 단층촬영실에서 산란선으로부터 조금이라도 자유로워지기 위해서는 설계단계에서부터 충분한 공간 확보가 우선되어야하고 모든 검사에서 방사선사는 최소의 선량으로 최상의 영상을 제공할 수 있는 다양한 기술개발에 더욱 노력을 아끼지 말아야 할 것으로 생각된다.

• 한국가금학회지
• /
• 제18권3호
• /
• pp.183-196
• /
• 1991

세계적으로 가장 출현빈도가 높은 혈청형인 마사추셋형 IBV를 발육란에서 증식시킨 다음 요막강액을 채취, 바이러스를 농축 정제하여 항원으로 사용하고 야외 IBV감염계군에서 채취한 혈청중 HI반응에 의해 양성 및 음성혈청을 선발, 표준혈청으로 사용하여 ELISA를 시도한 결과 다음과 같은 성적을 얻었다. 1. 정제항원은 ELISA plate의 well당 40ng 단백량으로 coating하였을 때 높은 P/N치를 나타냈고 혈구응집항원은 well당 1.2~2.5 HA unit로 coating하였을 때 정제항원과 유사한 결과를 보였다. 2. 항원의 coating시 온도와 시간은 37$^{\circ}C$, 1시간이나 4$^{\circ}C$에 12~16시간 처리하였을 때 P/N에서 유의성 있는 차이를 보이지 않았으며 항원을 건조시켜 4$^{\circ}C$에 1개월 보관하여도 항원성의 변화를 인정할 수 없었다. 3 제품이 다른 3종류의 plate에서 항원 coating의 차이를 비교한 결과 제품간에 항원 coating의 균일도와 농도에 있어서 뚜렷한 차이가 인정되었다. 4. 음성혈청희석배수 1：50에서도 비특이 반응은 인정되지 않았으며 가경혈청은 1：100희석했을 때 높은 P/N치를 보여서 screen용 희석배수로 적당하였다. 5. Substrate처리한 후 발색 정도는 15분 이후에는 일정하여 30분까지 변화가 없었으며 이때 발색정지제를 처리하였을 때 치리직후부터 4시간까지도 흡광도에 있어서 유의성 있는 차이가 인정되지 않았다. 6. 74개의 혈청에 대해 ELISA에 의한 P/N치와 HI항체가와의 상관관계는 r＝0.42였으며 HI가 2$^{6}$이상, P/N치 1.4이상을 기준으로 하였을 때 양성 case의 일치율은 98.7%였다. 1. 백신접종 시험계군에서 ELISA와 HI test에 의한 항체 소장 비교에서는 10주째를 제외하고는 양 test에서 유사한 추이를 보였다.

• 멤브레인
• /
• 제10권4호
• /
• pp.205-212
• /
• 2000

실리콘 고무(고무상고분자)와 폴리스틸렌(유리상고분자)을 이용하여 true-IPN을 합성하였다. 합성방법은 단계(sequential) IPN(interpenetrating polymer net- work) 제조방법이며, 이때 IPN 내의 폴리스틸렌 함량을 10-70 wt%로 변화시켜 폴리스틸렌의 함량에 따른 산소/질소의 투과특성을 조사하였다. FTIR과 NMR의 결과 단계IPN 합성법으로 실리콘고무-폴리스틸렌의 IPN분리막이 제조되었음을 확인하였으며, 열분석 결과 폴리스틸렌의 함량이 증가할수록 실리콘고무와 폴리스틸렌의 혼합도(degree of mixing)가 증가한다는 것을 알 수 있었다. 기체투과특성 조사에서는 폴리스틸렌의 함량이 증가할수록 산소투과도는 감소하는 경향이 있었으나, 50wt% 폴리스틸렌이 함유된 분리막에서 일시적인 증가를 보여주었다. 또한 선택도는 폴리스틸렌의 함량이 증가하면서 약간 증가하다, 50wt% 폴리스틸렌이 함유된 분리막에서 20.6% 향상된 최대 값을 얻을 수 있었다. 이것은 폴리스틸렌이 50wt%인 분리막에서 IPN의 상호보완적인 성질이 가장 잘 나타난 결과라고 할 수 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권12호
• /
• pp.1691-1695
• /
• 2005

The bovine lymphocyte antigen (BoLA)-DRB3 gene encodes cell surface glycoproteins that initiate immune responses by presenting processed antigenic peptides to CD4 T helper cells. DRB3 is the most polymorphic bovine MHC class II gene which encodes the peptide-binding groove. Since different alleles favour the binding of different peptides, DRB3 has been extensively evaluated as a candidate marker for associations with various bovine diseases and immunological traits. For that reason, the genetic diversity of the bovine class II DRB3 locus was investigated by polymerase chain reaction-restriction fragment length polymorphism method (PCR-RFLP). This study describes genetic variability in the BoLA-DRB3 in Iranian Golpayegani Cattle. Iranian Golpayegani Cows (n = 50) were genotyped for bovine lymphocyte antigen (BoLA)-DRB3.2 allele by polymerase chain reaction and restriction fragment length polymorphism method. Bovine DNA was isolated from aliquots of whole blood. A two-step polymerase chain reaction followed by digestion with restriction endonucleases RsaI, HaeIII and BstYI was conducted on the DNA from Iranian Golpayegani Cattle. In the Iranian Golpayegani herd studied, we identified 19 alleles.DRB3.2${\times}$16 had the highest allelic frequency (14%), followed by DRB3.2${\times}$7 (11%). Six alleles (DRB3.2${\times}$25, ${\times}$24, ${\times}$22, ${\times}$20, ${\times}$15, ${\times}$3) had frequencies = 2%. Although additional studies are required to confirm the present findings, our results indicate that exon 2 of the BoLA-DRB3 gene is highly polymorphic in Iranian Golpayegani Cattle.

• 대한화학회지
• /
• 제55권5호
• /
• pp.733-740
• /
• 2011

Multiple regression analysis was used for the calculation of pKa values of 15 substituted benzaldoximes by using various types of descriptors as parameters. These descriptors are based on quantum mechanical treatments. They were derived by employing semi-empirical calculation represented by the PM3 model and an Abinitio method expressed by Hartree-Fock(HF) model performed at the 6-311 G(d, p) level of theory. The parameters tested for their ability to represent the variations observed in the experimental pKa(s) are atomic and structural properties including Muliken charges on the atoms of hydroxyl group and C=N bond, the angle $C_6-C_1-C_7$, and length of O-H bond. Molecular properties are also used like energies of HOMO and LUMO, hardness(${\eta}$), chemical potential(${\mu}$), total energy(TE), dipole of molecule(DM), and electrophilicity index(W). The relation between pKa values and each of these parameters of the studied compounds is investigated. Depending on these relations, two sets of parameters were constructed for comparison between the PM3 and HF methods. The results obtained favor the Abinitio method for such applications although both models proved to have high predictive power and have sufficient reliability to describe the effect of substituents on pKa values of benzaldoxime compounds under consideration which is clear from the values of correlation coefficient $R^2$ obtained and the consistency between the experimental and the calculated values.

• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.346-350
• /
• 2002

A glassy carbon electrode (GCE) modified with 2,2':6':2”-terpyridine (2,2':6':2”-TPR) using a spin coating method was applied for the highly selective and sensitive analysis of a trace amount of $Hg_2^{2+}$ ions. Various experimental parameters, which influenced the response of the 2,2':6':2”-TPR modified electrode to $Hg_2^{2+}$ ions, were optimized. The linear sweep and differential pulse voltammograms for the 2,2':6':2”-TPR modified electrode deposited with Hg show a well-defined anodic peak at +0.65 V (vs. Ag|AgCl). After a 25 min preconcentration time in an $Hg_2^{2+}$ ion solution (0.1 M acetate buffer, pH 5.0), differential pulse voltammetry(DPV) with 2,2':6':2”-TPR modified electrode shows a linear response between $1.0\;{\times}\;10^{-6}M\;and\;2.0\;{\times}\;10^{-7}M$. The least-square treatment of these data produce an equation of I[${\mu}A$] = 0.031 + 0.005C with r = 0.980(n = 5). The detection limit of this electrode with linear sweep voltammetry and differential pulse anodic voltammetry were $2.0\;{\times}\;10^{-6}M\;and\;8.0\;{\times}\;10^{-8}M$, respectively. The presence of Pb, Fe, Cd, Ti, Ni, Co, Mg, Al, Mn, and Zn did not interfere in the analysis of the $Hg_2^{2+}$ ion. The 2,2':6':2”-TPR modified GCE has been successfully applied in determination trace amounts of Hg in a human urine sample.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.35-40
• /
• 2015

Centrifugal pumps consume considerable amounts of energy in various industrial applications. Therefore, improving the efficiency of pumps machine is a crucial challenge in industrial world. This paper presents numerical investigation of flow characteristics in volutes of centrifugal pumps in order to compare the energy consumption. A wide range of volumetric flow rate has been investigated for each case. The standard k-${\varepsilon}$ is adopted as the turbulence model. The impeller rotation is simulated employing the Multi Reference Frames(MRF) method. First, two different conventional design methods, i.e., the constant angular momentum(CAM) and the constant mean velocity (CMV) are studied and compared to a baseline volute model. The CAM volute profile is a logarithmic spiral. The CMV volute profile shape is an Archimedes spiral curve. The modified volute models show lower head value than baseline volute model, but in case of efficiency graph, CAM curve has higher values than others. Finally for this part, CAM curve is selected to be used in the simulation of different cross-section shape. Two different types of cross-section are generated. One is a simple rectangular shape, and the other one is fan shape. In terms of different cross-section shape, simple rectangular geometry generated higher head and efficiency. Overall, simulation results showed that the volute designed using constant angular momentum(CAM) method has higher characteristic performances than one by CMV volute.