• Korean Journal of Acupuncture
• /
• v.36 no.2
• /
• pp.93-103
• /
• 2019

Objectives : The aim of this study is to review the current trends in experimental studies on the acupuncture moxibustion treatment for visceral hypersensitivity. Methods : PubMed was searched for experimental studies about visceral hypersensitivity and acupuncture/moxibustion. Data were extracted and tabulated from the selected articles about experimental method, intervention, result and mechanism. Results : Total 23 articles were reviewed. Chronic visceral hypersensitivity animal model was applied in 17 studies (74%). Visceral hypersensitivity was measured by abdominal withdrawal reflex scoring or/and abdominal electromyogram. Acupoints like ST25, ST36, ST37, BL25, LI11, BL32 and PC6 were treated by electroacupuncture or moxibustion. All articles reported that electroacupuncture or moxibustion treatment is significantly effective in reducing visceral hypersensitivity. Treatment mechanisms were studied, related to mast cell, serotonin (5-HT) and receptor (5-HT3R and 5-HT4R), substance P (SP), vasoactive intestinal polypeptide (VIP), c-fos positive cell, corticotropin-releasing hormone (CRH), purinergic 2X (P2X)2, P2X3, P2X4, P2X7, N-methyl-D-aspartate (NMDA) receptor (NR1 and NR2B), prokinectin (PK) 1 and PK2. Conclusions : Evidences on acupuncture/moxibustion treatment for visceral hypersensitivity in animal studies warrant more research on effective acupoins, electro-acupuncture methods and treatment durations.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.949-959
• /
• 2021

The current study aims to explore the shielding properties of multi-component borate-based glass series. Seven glass-samples with composition of (80-y)H₃BO₃-10ZnO-10Na₂O-yBaO where (y = 0, 5, 10, 15, 20, 25 and 30 mol.%) were synthesized by melt-quench method. Various shielding features for photons, neutrons, and protons were determined for all prepared samples. XCOM, Phy-X program, and SRIM code were performed to determine and explain several shielding properties such as equivalent atomic number, exposure build-up factor, specific gamma-ray constants, effective removal cross-section (Σ_R), neutron scattering and absorption, Mass Stopping Power (MSP) and projected range. The energy ranges for photons and protons were 0.015-15 MeV and 0.01-10 MeV, respectively. The mass attenuation coefficient (μ/ρ) was also determined experimentally by utilizing two radioactive sources (¹⁶⁶Ho and ¹³⁷Cs). Consistent results were obtained between experimental and XCOM values in determining μ/ρ of the new glasses. The addition of BaO to the glass matrix led to enhance the μ/ρ and specific gamma-ray constants of glasses. Whereas the remarkable reductions in Σ_R, MSP, and projected range values were reported with increasing BaO concentrations. The acquired results nominate the use of these glasses in different radiation shielding purposes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.3
• /
• pp.231-240
• /
• 2024

Titanium dioxide (TiO₂) holds significant scientific and technological relevance as a key photocatalyst and resistive random-access memory, demonstrating unique physicochemical properties and serving as an n-type semiconductor. Understanding the density and arrangement of oxygen vacancies (VOs) is crucial for tailoring TiO₂'s properties to diverse technological needs, driving increased interest in exploring oxygen vacancy complexes and superstructures. In this mini review, we summarize the recent understandings of the fundamental properties of oxygen vacancies in bulk rutile (R-TiO₂) and anatase (A-TiO₂) based on DFT and beyond method. We specifically focus on the excess electrons and their spatial arrangement of disordered single VO in bulk R and A-TiO₂, aligned with the experimental findings. We also highlight the theoretical works on investigating the geometries and stabilities of ordered VOs complexes in bulk TiO₂. This comprehensive review provides insights into the fundamental properties of excess electrons in reduced TiO₂, offering valuable perspectives for future research and technological advancements in TiO₂-based devices.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.3
• /
• pp.570-579
• /
• 2024

Root-nodule nitrogen-fixing bacteria are known for being specific to particular legumes. This study isolated the endophytic root-nodule bacteria from the nodules of legumes and examined them to determine whether they could be used to promote the formation of nodules in other legumes. Forty-six isolates were collected from five leguminous plants and screened for housekeeping (16S rRNA), nitrogen fixation (nifH), and nodulation (nodC) genes. Based on the 16S rRNA gene sequencing and phylogenetic analysis, the bacterial isolates WC15, WC16, WC24, and GM5 were identified as Rhizobium, Sphingomonas, Methylobacterium, and Bradyrhizobium, respectively. The four isolates were found to have the nifH gene, and the study confirmed that one isolate (GM5) had both the nifH and nodC genes. The Salkowski method was used to measure the isolated bacteria for their capacity to produce phytohormone indole acetic acid (IAA). Additional experiments were performed to examine the effect of the isolated bacteria on root morphology and nodulation. Among the four tested isolates, both WC24 and GM5 induced nodulation in Glycine max. The gene expression studies revealed that GM5 had a higher expression of the nifH gene. The existence and expression of the nitrogen-fixing genes implied that the tested strain had the ability to fix the atmospheric nitrogen. These findings demonstrated that a nitrogen-fixing bacterium, Methylobacterium (WC24), isolated from a Trifolium repens, induced the formation of root nodules in non-host leguminous plants (Glycine max). This suggested the potential application of these rhizobia as biofertilizer. Further studies are required to verify the N₂-fixing efficiency of the isolates.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.63-66
• /
• 2017

BACKGROUND: The phenol concentrations in water samples were determined using gas chromatography after derivatization of the analyte to phenyl acetate followed by extraction using a large volume of solvent. However, this procedure requires an additional purification step and is not analytically efficient. METHODS AND RESULTS: In this study, phenol was first extracted from an acidified water sample using ethyl acetate and then acetylated using acetic anhydride in the presence of a small amount of water and $K_2CO_3$. The derivative was extracted using 1mL of n-butyl acetate. One microliter of the extract was analyzed by GC-MS without further purification. The calibration curve showed good linearity with the $r^2$ value of 0.9968. The method detection limit and the limit of quantitation were estimated to be $0.18{\mu}g/L$ and $0.56{\mu}g/L$, respectively. Repeatability (RSD, n=3) and recovery (n=3) were 9.1%-4.3% and 90.6%-110.5%, respectively. The concentrations of phenol in a few samples of stream water were distributed in the range of $2.51-7.51{\mu}g/L$. CONCLUSION: This method is simpler and faster to implement than those currently utilized and shows high analytical reliability. It can be applied to the quantitative determination of phenol concentrations in surface water and groundwater samples.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.310-313
• /
• 2009

Several high nitrogen stainless steel ingots(100kg) were fabricated with changing Ni and $[N]_2$ contents by Pressurized Vacuum Induction Melting(P_VIM). After free forging process, chemical compositions, microstructure and mechanical properties were estimated. Hardness was increased with the increase of $[N]_2$ content. Furthermore, microstructure including a lot of tempering twins was observed with optical microscope. Mechanical properties were estimated as function of solution treatment temperature and cooling method(air/water) under duration time of 1 hr on sample that were fabricated with Ni content under the atmospheric $[N]_2$ pressure. At solution treatment range of $1050{\sim}1100^{\circ}C$, hardness was decreased with the increase of solution temperature and there were little discrepancy of microstructure and hardness with cooling method. Computer simulation was carried out in order to inspect pass schedule in cold rolling process. When the condition of simulation was roll speed of 2.5mpm, rolling rate $15{\sim}17%$ per pass, it was ascertained that the formation such as deformation by sticking and lamellar sliver etc. was restricted from a simulation.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.744-752
• /
• 2013

The miscibility between poly(L-lactide) (PLLA) and poly(methyl methacrylate) (PMMA) was investigated using thermal analyses for the purpose of developing birefringence-free material at oriented state. The effect of methyl acrylate (MA) units as comonomer of PMMA on the miscibility was also studied. All the blends prepared in this study show composition-dependent single $T_g$'s between those of blend components and high transparency over the visible region, indicating the miscibility at molecular level and no discernible effect of MA units on it. No phase separation was observed at elevated temperature of $280^{\circ}C$, higher than the degradation of PLLA and PMMA. The interaction energy density in PLLA/PMMA blends with 17 mol% of MA was measured to be $-0.74J/cm^3$ from the equilibrium melting temperature depression based on the Hoffman-Weeks method. The blends show zero-${\Delta}$n behavior at a specific mixing ratio and the drawing ratio of 3 due to compensation of intrinsic orientation birefringence. Birefringence dispersion of PLLA/PMMA5 blends was also measured to examine the possibility for quarter-wave plates or polarizer protective films.

• The Journal of Korean Society for School & Community Health Education
• /
• v.22 no.4
• /
• pp.49-60
• /
• 2021

Objectives: Laboratories have various latent physical, chemical, biological, and ergonomical factors according to the diversification and fusion of research and development activities. This study aims to investigate the chemical exposure concentrations of college laboratories and evaluate their health risks, and use them as basic data to promote the health of college students. Methods: The sampling and analysis of harmful chemicals in the air in laboratories were performed using Method 1500 of the U.S. National Institute for Occupational Safety and Health (NIOSH)의 Method 1500. The harmful chemicals in the laboratories were divided into carcinogenic and non-carcinogenic chemicals. Risk assessment was performed using the cancer risk (CR) for carcinogenic chemicals and using the hazard index (HI) for non-carcinogenic chemicals. Results: The harmful chemicals in college laboratories consisted of acetone, diethyl ether, methylene chloride, n-hexane, ethyl acetate, chloroform, tetrahydrofuran, toluene, and xylenes. They showed the highest concentrations in laboratories A (acetone 0.001~2.34ppm), B (chloroform 0.95~6.35ppm), C (diethyl ether 0.08~8.68ppm), and D (acetone 0.07~14.96ppm). The risk assessment result for non-carcinogenic chemicals showed that the HI of methylene chloride was 2.052 for men and 2.333 for women, the HI of N-hexane was 4.442 for men and 5.05 for women. Thus, the HI values were higher than 1. The risk of carcinogenic chemicals is determined by an excess cancer risk (ECR) value of 1.0×10^-5, which means that one in 100,000 people has a cancer risk. The ECRs of chloroform exceeded 1.0×10^-5 for both men and women, indicating the possibility of cancer risk. Conclusion: College laboratories showed the possibility of non-carcinogenic health risks for methylene chloride, n-hexane, tetrahydrofuran (THF), toluene, and xylenes, and carcinogenic health risks for chloroform, methylene chloride. However, this study used the maximum values of measurements to determine the worst case, and assumed that the subjects were exposed to the corresponding concentrations continuously for 8 hours per day for 300 days per year. In consideration of the nature of laboratory environment in which people are intermittently exposed, rather than continuously, to the chemicals, the results of this study has an element of overestimation.

• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.659-678
• /
• 1998

In the present study, oligonucleotide probes based on 16S rRNA were taken to investigate the diversity of oral spirochetes without culture method. This is the first study that revealed oral spirochetes of both presently cultivable and uncultured oral spirochetes in Korean adult periodontitis patients. Subgingival plaque samples were taken from diseased sites(probing depth ${\geq}6\;mm$, experimental group, n=116) and healthy sites(probing depth${\leq}3mm$, control 1 group, n=28) in 29 patients with adult periodontitis, and from 20 periodontally healthy subjects(probing depth${\leq}3mm$, control 2 group, n=100). Following being examined under phase-contrast microscope, all samples were submitted to dot-blot hybridization after polymerase chain reacton with eubacterial primers. 5 species-specific probes(TVIN, TDEN, TMAL, TSOC, and TPEC) and 7 group-specific probes(TRE I, TRE II, TRE III, TRE IV, TRE V, TRE VI, and TRE VII) were used one by one for the identification of both cultivable and so far uncultivable oral spirochetes. All probes were labeled with digoxigenin(DIG)-ddUTP and detected by chemilumininescence. The following results were obtained. 1. Under phase-contrast microscope, 91.37% and 14.28% of oral spirochetes were observed in the experimental and control 1 groups, respectively. None of oral spirochetes were observed in control 2 group. 2. With universal probe, 98.27%, 46.42%, and 22.0% of oral spirochetes were observed in experimental, control 1, and control 2 groups, respectively. 3. With specific probe, 95.68%, 35.71%, and 19.0% of oral spirochetes were observed in experimental, control 1, and control 2 groups, respectively. 4. With species-specific probes, T. socranskii were recovered in a high percentage of sites(81.89%) examined, followed by T. maltophilum(50.0%), T. vincentii(36.20%), T. denticola(13.79%), respectively. With group- specific probes, TRE IV was recovered in a high percentage of sites(85.34%) examined, followed by TRE II(77.58%), TRE I(56.89%), TRE III(25.86%), TRE VI(5.17%), and TRE V(2.58%), respectively. 5. T. vincentii were only observed in the diseased sites, not in the healthy sites. 6. Neither T. pectinovorum nor group VII oral spirochetes were observed in any sites. The findings warrant further investgations of the recovered spirochetes to elucidate the possible associations of oral spirochetal prevalence in race and types of periodontitis, pathogenesis of T. vincentii and the possible distributional change of oral spirochetes before and after treatments.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1276-1289
• /
• 2017

This study isolated and purified the antimicrobial peptide McSSP-31 from an acidified hemocyte extract of a Mytilus coruscus. The antimicrobial peptide was purified by using a $C_{18}$ reversed-phase high-performance liquid chromatography (HPLC). The peptide was determined to be 3330.549 Da by matrix assisted-laser desorption ionization time-of-flight mass spectrophotometer (MALDI-TOF/MS). The N-terminus of a 14 amino-acid sequence was identified as P-S-P-T-R-R-S-T-S-R-S-K-S-R by Edman degradation method. The acquired sequence showed a 93% similarity with the sperm-specific protein Phi-1, which is from M. californianus. The identified open-reading frame (ORF) of peptide was 306 bp encoding 101 amino acids, which was analyzed by rapid amplification of cDNA ends (RACE), cloning and sequencing analysis. We compared the full sequence with other known proteins that reveal the sperm-specific protein Phi-1 (93.5%) of M. californianus. Synthesized antimicrobial peptide (McSSP-31) showed antibacterial activity against gram-positive bacteria including B. subtilis, S. mutans, S. aureus and gram-negative bacteria including E. coli, K. pneumoniae, P. mirabilis, P. aeruginosa and fungi, C. albicans. Also, synthesized peptide showed strong antibacterial activity against antibiotic-resistant strains, including S. aureus. The cytotoxicity of the peptide was determined by using the HUVEC human cell line. The peptide did not exhibit any significant cytotoxic effects on the normal human cell line, and it had very low hemolytic activity with flounder hemoglobin. The results demonstrated that peptide purified from the hemocyte of a M. coruscus exhibits antibacterial activity against various bacteria and has the potential to be an alternative antibiotic agent.