• Journal of Preventive Medicine and Public Health
• /
• 제39권6호
• /
• pp.462-468
• /
• 2006

Objectives : The purpose of this study was to gain an understanding of the effects of three exercise types on anthropometric and serum lipids and physiological index factors, which are known to be the three risk factors of cardiovascular disease in male workers. Methods : The experimental study period was 12 weeks. In this study, 30-40's males (N=31) were assigned to 3 experimental groups: regular aerobic(treadmill walking) exercise group, regular anaerobic(muscular endurance) exercise group, irregular aerobic & anaerobic exercise group and a control group using a stratified random assignment method. Results : In relation to anthropometric factors, the regular aerobic & anaerobic exercise groups showed significant decreases in Weight, Broca's index, WC, BMI, WHtR, WHpR and HRrest. With regard to the serum lipid factors, the TC was decreased, but the HDL-c increased among the regular aerobic & anaerobic exercise groups. However, no significant difference was found between the other groups in respect to the LDL-c and TG. Considering the physiological factors, the TC/HD-c, TC-HDL/HDL-c, LDL-C/HDL-c and NON-HDL-c ratios were decreased, but the HDL-c/TC ratio increased among the regular aerobic & anaerobic exercise groups. The TG/HDL-c and HDL-c/LDL-c ratios showed no significant differences between the groups. These results indicated that the positive change for each factor is much larger in the regular exercise groups, especially in the anaerobic exercise group. Conclusions : The results indicate that not only regular aerobic exercise, but also regular anaerobic(muscular endurance) exercise could be utilized in lessening the deleterious effects of the risk index factors for cardiovascular disease.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권2호
• /
• pp.168-173
• /
• 2004

The ability of frozen-thawed fetal skin was examined to generate viable cell lines for nuclear transfer. Fetal skin frozen at -20$-20^{\circ}C$, $-30^{\circ}C$ or $-80^{\circ}C$ in the presence of 5% DMSO used as tissue explants to generate somatic cells. The resultant confluent cells were then used as donors for nuclear transfer (NT). Of the bovine NT embryos reconstracted from the somatic cells, 62.3%, 76.6% to 65% showed cleavage 70.5%, 81.9% to 78.5% reached the stage of morula formation and 39.7%, 43.2% or 47.6% reached the blastocyst stage. There was no significant difference in development when the NT embryos were compared with those reconstracted from fresh somatic cell derieved skin tissues (72%, 75.3%, and 45.2%, for cleavage, and development to morula and blastocyst stage, respectively). NT embryos were then placed in a portable $CO_2$ incubator and carried to China from Japan by air. After reaching to farm, two NT embryos were transferred to each of 5 recipients. We obtained 2 NT calves which birth weights is 30kg and 36kg female, and gestation periods is 281 and 284 days, respectively. There were no observation any abnormality from those calves. The results indicated that cell lines derieved from bovine fetal skin cryopreserved by a simple method could be used as donors in nuclear transfer using the portable $CO_2$ incubator.

• Journal of the Korean Wood Science and Technology
• /
• 제17권1호
• /
• pp.55-68
• /
• 1989

This experiment was carried out to investigate the crack of coated Nitrocellulose Lacquer on flatand edge-grained boards of Quercus acutissima, ring-porous wood, and Betula platyphylla var. japonica, diffuse-porous wood, by variations of moisture contents at 7, 13 and 21%. Cold check system was used as an accelerating method for crack development, in which one cycle of the system consisted of 10 replications of each unit cycle, $60^{\circ}C$ for 4hr followdd by $-20^{\circ}C$ for 4hr. The analysis of Nitrocellulose Lacquer characteristics was made by means of water permeation measurement, F.T.I.R. spectroscopy, N.M.R. spectroscopy, gel permeation chromatography, gas chromatography, and D.S.C. The results obtained were as follows: 1. The number of cracks increased with the increasing moisture content of board. 2. The crack of coated film on flat-grained board was fewer in number than on edge-grained board. 3. The crack occurred in Quercus acutissima was more numerous on edge-grained board but less frequent on flat-grained board compared with that in Betula platyphylla var. japonica, respectively. 4. The cold crack vertically developed to the grain both in Quercus acutissima and Betula platyphylla var. japonica. 5. Water permeability in intermediate coated film was lower than in under and top coated film, but the difference was not confirmed between under and top coated film.

• 대한임상검사과학회지
• /
• 제44권3호
• /
• pp.103-111
• /
• 2012

Low-Density Lipoprotein cholesterol (LDLC) is the most important marker for the treatment of hyperlipidemia in NCEP-ATP III(National Cholesterol Education Program-Adult Treatment Panel III) guideline. Therefore, LDL cholesterol is pathologically meaningful, accurate measurement should be a top priority. Currently, LDLC is directly measured in most cases, but, the estimate is still used in mass health examination or screening test. This study is about the comparison of LDL-Cholesterol direct measurement with the estimate using various formula (Friedewald: [LDL-F=TC-HDL-TG/5], Nakajima: [LDL-N=TC-HDL-TG/4], Hattori: [LDL-H =0.94TC-0.94HDL-0.19TG], Puavilai: [LDL-P=TC-HDL-TG/6], Carvalho: [LDL-C=3(TC-HDL)/4]) for calculating more accurate value. We analyzed total cholesterol (TC), try-glyceride (TG), high-density lipoprotein cholesterol (HDLC), and LDLC levels of 210 subjects between June and November in 2011. Until now, the Friedewald formula is the most commonly used estimate for the LDLC. When Friedewald formula was applied, the correlation coefficient (r) was 0.940, showing high correlation. But, the result of the direct method was significantly different, compared with those of the Friedewald formula in triglyceride levels ${\geq}400mg/dL$(p<0.05). There was the highest correlation when we used LDL-P formula(r=0.947) in triglyceride levels <400 mg/dl. Also there was the lowest mean difference regardless of triglyceride level. Therefore, the study showed that TG/6 is more precise means of calculation than TG/5. On the other hand, the calculation of LDL-Cholesterol was underestimated, compared with direct measurement. It is necessary to have more data and modified Friedewald formula should be used for the accurate calculation.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.165-177
• /
• 2015

Purpose: Accurate monitoring of soil strength is a key technology applicable to various precision agricultural practices. Soil strength has been traditionally measured using a cone penetrometer, which is time-consuming and expensive, making it difficult to obtain the spatial data required for precision agriculture. To improve the current, inefficient method of measuring soil strength, our objective was to develop and evaluate an in-situ system that could measure horizontal soil strength in real-time, while moving across a soil bin. Methods: Multiple cone-shape penetrometers were horizontally assembled at the front of a vertical plow blade at intervals of 5 cm. Each penetrometer was directly connected to a load cell, which measured loads of 0-2.54 kN. In order to process the digital signals from every individual transducer concurrently, a microcontroller was embedded into the measurement system. Wireless data communication was used between a data storage device and this real-time horizontal soil strength (RHSS) measurement system travelling at 0.5 m/s through an indoor experimental soil bin. The horizontal soil strength index (HSSI) measured by the developed system was compared with the cone index (CI) measured by a traditional cone penetrometer. Results: The coefficient of determination between the CI and the HSSI at depths of 5 cm and 10 cm ($r^2=0.67$ and 0.88, respectively) were relatively less than those measured below 20 cm ($r^2{\geq}0.93$). Additionally, the measured HSSIs were typically greater than the CIs for a given numbers of compactor operations. For an all-depth regression, the coefficient of determination was 0.94, with a RMSE of 0.23. Conclusions: A HSSI measurement system was evaluated in comparison with the conventional soil strength measurement system, CI. Further study is needed, in the form of field tests, on this real-time measurement and control system, which would be applied to precision agriculture.

• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.39-45
• /
• 2008

Formaldehyde and volatile organic compounds (VOCs) are emitted from wood-based panels that have been made using wood particles, wood fiber, wood chips, formaldehyde-based resins and so on. In this study, we examined formaldehyde and total VOCs (TVOC) emission behaviors for plywood overlaid with water-soluble phenolic resin impregnated linerboard (PL), and two kinds of surface materials (decorative veneer and pre-impregnated finishing foil) that were adhered onto the PL that named DPL and PPL. EVA (ethyl vinyl acetate) was used to overlay the decorative veneer and pre-impregnated finishing foil on the plywood with water-soluble phenolic resin impregnated linerboard by a hot press instrument. The debonding test and accelerated aging test were conducted to assess their mechanical properties. Formaldehyde and TVOC emission concentrations were measured using the FLEC method and a VOC Analyzer, respectively. The debonding test results of PL, DPL and PPL were 1.2, 1.5, and $0.5N/mm^2$, respectively. The surface appearance of the samples were not changed after the accelerated aging test. The PL and DPL exhibited reduced formaldehyde and TVOC emission levels, respectively. In the case of PPL, the VOC value was relatively higher than those of PL and DPL.

• 한국보건간호학회지
• /
• 제24권2호
• /
• pp.249-257
• /
• 2010

Purpose: This study aimed to clarify the relationship between analysis of rape myths acceptance and gender role stereotype among university students. Method: First-year students at two three-year colleges in Jeonnam and two three-year colleges in Jeonbuk (n=406) were selected by convenience sampling. Of these, responses from 386 (95.8%) were analyzed. Result: Rape myths acceptance in male students was significantly higher than female students (t=5.400, p=.00). In terms of gender role stereotype, male students were significantly higher than female students (t=3.869, p<.001). The relationship between rape myths acceptance and gender role stereotype was in the middle range of correlation: male students' correlation coefficient was r=.520 (=p<.001), and female students' was r=.524 (p=<.001). Conclusion: The results indicate that university students' attitudes toward sex have not been properly established yet. Moreover, they highlight that in our society there still exists a male dominated social structure and inequality of sexes. To prevent sexual violation from occurring at the universities, it is necessary that programs to establish proper attitudes of students toward these two factors, should be developed and the results monitored frequently. In addition, cross sectional studies aimed at understanding rape myths acceptance and gender role stereotypes are needed.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.194-199
• /
• 2011

In this study, non-stoichiometric 1-x$[(K_{0.5}Na_{0.5})_{0.97}(Nb_{0.96}Sb_{0.04})O_3]$ + x $CeMnO_3$ + 0.8 mol%CuO + 0.2 wt% $Ag_2O$ (x=0, 0.005) ceramics were prepared by a conventional mixed oxide and carbonate method, their dielectric and piezoelectric properties were investigated with the variations of sintering temperature. As $CeMnO_3$ substitution incereased, the density, piezoelectric constant($d_{33}$) and dielectric constant($\varepsilon_r$) were increased and the mechanical quality factor(Qm) was decreased. At the sintering temperature of $1100^{\circ}C$, the density, electromechanical coupling factor($k_p$), dielectric constant($\varepsilon_r$) and piezoelectric constant($d_{33}$) of 0.5mol% $CeMnO_3$ specimen showed the optimun values of 4.475 $g/cm^2$, 0.437, 552 and 166 pC/N, respectively. However, the mechanical quality factor($Q_m$) showed the minimum value of 380.

• Current Research on Agriculture and Life Sciences
• /
• 제5권
• /
• pp.134-142
• /
• 1987

The purpose of this study is to establish more rational and practical planning theory for amusementpark. It analyze and considerate the fluctuation of the people who come and use a Tong-Ch'on amusementpark. The results drawn from this research work are as follows ; There are considerable correlation between use fluctuation and some factors. The factors are season (spring, summer, autumn) as a time, temperature, cloud amount, duration of sunshine, weather (rainy day) as a climate and date (weekday, holiday) as a social system. The important variables are temperature, cloud amount, duration of sunshine and date (week day, holiday) to estimate the user of amusementpark. I can reduce the following two types of regression models. 1.${\log}_eY1=6.9114+0.1135TEM+0.00002_eSUM-0.4068WI+0.4316W3$ ($R^2=0.94$) 2. ${\log}_eY2=7.2069+0.1177TEM-0.0990CLO+0.488W3$ ($R^2=0.95$) Y ; Number of User TEM ; Temperature CLO ; Amount of cloud SUN ; Duration of Sunshine WI ; Weekday W3 ; Holiday Those model is inorder to estimate the user for management of Tong-Ch'on amusementpark and use on the computation of facility size for reconstruction. Besides the amusementpark, city park and outdoor recreation area could estimate of user throuth this method. But, I am not sure about the regression models because I didn't apply the regression models to the other amusementpark, city park or outdoor recreation area. Therefore, I think that this problem needs to study in the future.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.245-256
• /
• 2019

The experimentally determined mechanical behavior of the material under the prescribed service conditions is the basis of advanced engineering optimum design. To allow experimental data on the behavior of the material considered, uniaxial stress tests were made. The aforementioned tests have enabled the determination of mechanical properties of material at different temperatures, then, the material's resistance to creep at various temperatures and stress levels, and finally, insight into the uniaxial high cyclic fatigue of the material under different applied stresses for prescribed stress ratio. Based on fatigue tests, using modified staircase method, fatigue limit was determined. All these data contributes the reliability of the use of material in mechanical structures. Data representing mechanical properties are shown in the form of engineering stress-strain diagrams; creep behavior is displayed in the form of creep curves while fatigue of the material is presented in the form of S-N (maximum applied stress versus number of the cycles to failure) curve. Material under consideration was 18CrNi8 (1.5920) steel. Ultimate tensile strength and yield strength at room temperature and at temperature of $600^{\circ}C$: [${\sigma}_{m,20/600}=(613/156)MPa$; ${\sigma}_{0.2,20/600}=(458/141)MPa$], as well as endurance (fatigue) limit at room temperature and stress ratio of R = -1 : (${\sigma}_{f,20,R=-1}=285.1MPa$).