• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.91-94
• /
• 2001

Powder Metallurgy method have been used to fabricate TiC base composite with ferrous binder. TiC base composite has versatile hardness and is usable as sintered, or after heat treatment as required by the given applications. Smooth, round TiC grains impart high wear resistance and lubricity as well known characteristics of this composite. Annealed composite can be formed by conventional machining and be hardened up to 70 H$\_$R/C in vacuum. The optimizing fabrication process enables this composite to improve mechanical properties in heat, wear and corrosion environments. This study has examine the relationship between fabrication condition and mechanical property in TiC-Cr-Mo-Fe Composite.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.131-133
• /
• 1993

In the power system state estimation, the J(x)-index test and normalized residuals $r_N$ have been used to detect the presence of bad measurements and identify their location. But, these methods require the complete re-estimation of system states whenever bad data is identified. This paper presents back-propagation neural network model using autoregressive filter for identification of bad measurements. The performances of neural network method are compared with those of conventional methods and simulation results show the good performance in the bad data identification based on the neural network under sample power system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.496-500
• /
• 2017

$Pb(Mn_{1/3}Nb_{2/3})_{0.07}(Ni_{1/3}Nb_{2/3})_{0.10}(Zr_{0.5}Ti_{0.5})_{0.83}O_3$ composition ceramics with high piezoelectric properties were fabricated by the columbite precursor method for ultrasonic generators, and the effects of sintering temperature on microstructure and piezoelectric properties were systematically investigated. It was found that the tetragonality of the ceramics decreased with increase in sintering temperature. Moreover, excellent physical properties such as $d_{33}=447pC/N$, ${\varepsilon}_r=1,843$, $k_p=0.641$, and $Q_m=1,207$ were obtained for an ultrasonic generator when the second calcination temperature and sintering temperature were $720^{\circ}C$ and $920^{\circ}C$, respectively.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.220-222
• /
• 1998

This paper presents a method, which develops an ability of Zero-phase Overcurrent Relay. Zero-phase current is very useful factor of Fault decision in Protect Relaying system. Actually, the setting-point value of Designed Relay, using Zero-phase current, is fixed. So in the case of deciding fault, Fixed setting-point value is not suitable for changing Load. and cause errors in Distributions system. For solving this problem, This paper proposes the Changed setting point value Algorithm, which can be adaptive for changing Distributions system using Zero-phase current r.m.s. indexes. The results of simulation under Load changing and High impedance fault show that proposed algorithm is useful for changing Distributions system and decreasing errors.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.176-178
• /
• 2002

Surface states of silicone polymer treated by plasma were investigated by the analysis by x-ray photoelectron spectroscopy(XPS) and surface voltage decay after corona charging. Plasma treatment causes the silica -like oxidative layer, which was confirmed with XPS, and lowers surface resistivity with increasing the plasma treatment time. Using the decay time constant of surface voltage, the calculated surface resistivity was compared with the value directly measured by voltage-current method using three electrodes system. A good agreement between two methods was obtained. In addition, we estimated the thermal activation energy for surface conduction, Based on our results, we could understand the relationship between surface chemical states and surface electrical properties.

• Journal of the Korean Statistical Society
• /
• v.11 no.1
• /
• pp.1-11
• /
• 1982

Srivastava and Anderson(1970) illustrate a method of obtaining Balanced (but not orthogonal) Resolution $IV^*$ designs starting with a BIB design. The incidence matrix of a BIB design with parameters (v, b, r, k, and $\lambda$) is utilized to obtain Balanced Resolution $IV^*$ designs with m factors and n=2b runs, where $m \leq v$. In this paper, the same idea is extended to the case of PBIB designs to obtain Partially Balanced Resolution $IV^*$ designs. In the designs obtained here the variances are balanced and the covariances are partially balanced with respect to the main effects. A proof of this property of Partially Balanced Resoultion $IV^*$ designs is given. The efficiency of Partially Balanced Resolution $IV^*$ designs is also considered and examples of Partially Balanced Resoultion $IV^*$ designs are included.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.531-534
• /
• 2008

A new forming process of the large-size forging within the limit of forming loads is developed by introducing the drawing process, which usually used to apply to sheet forming. For the development of the forming process, corresponding numerical simulation are carried out. The approach is based on the Taguchi method, and utilize the DOE for design of FEM analyses. In this study, the important factors are chosen at first, and then the concept of signal-to-nose(S/N) rate is applied to evaluate the formability of large size forging-products, and each value of the design parameter is determined.

• Journal of Photoscience
• /
• v.12 no.1
• /
• pp.11-15
• /
• 2005

The mechanism of interaction of two drugs viz., amoxicillin and cloxacillin with bovine serum albumin has been investigated using fluorescence absorption and circular dichroism spectroscopy. The quenching mechanism of fluorescence of bovine serum albumin by amoxicillin and cloxacillin was discussed. The binding sites number n and apparent binding constant Kwere measured by fluorescence quenching method. The thermodynamic parameters obtained from data at different temperatures were calculated. The distance r between donor (bovine serum albumin) and acceptor (amoxicillin and cloxacillin) was obtained according to Forster theory of non-radiative energy transfer. The effect of common ions on binding constant was also investigated. The results of synchronous fluorescence spectra, UV-vis absorption spectra and circular dichroism of BSA in presence of amoxicillin and cloxacillin show that the conformation of bovine serum albumin changed

• Food Science of Animal Resources
• /
• v.21 no.1
• /
• pp.64-70
• /
• 2001

The extraction procedure and HPLC condition were modified to analyze the residues of oxytetracycline, sulfamethoxazole and chloramphenicol in pork, simultaneously. The antibacterial agents in pork were extracted with 0.02M EDTA-Mcilivine buffer:ethanol:acetonitrile (5:3:2). After the removal of fat with n-hexane, the extracts were evaporated and purified with Sep-pak $C_{18}$ cartridge column using 0.01M oxalic acid 0.1% (v/v) triethylamine (TEA) in acetonitrile. The peak of antibacterial agents was detected with $\mu$ Bondapak C18 column, UV detector (280nm) and 0.01M oxalic acid: methanol: acetonitrile (7.5:2.0:0.5). Detection limits for three antibacterial standards were 0.03 ppm. Calibration curves were linear between 0.03 and 2.0 ppm (R$^2$>0.999). When spiked the level of 1.0 ppm of oxytetracycline, sulfamethoxazole and chloramphenicol into meats, the recoveries from meats were 77.3%, 79.7% and 59.3%, respectively. These results showed that the modified extraction method provided good analytical resolution and the recoveries of the above antibacterial agents in meats.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.77-83
• /
• 1996

This paper describes forging of trochoidal gears, which are being widely used in timing belt pulley, pump pulley etc., as a series of development of the simulator for non-axisymmetric elements. Kinematically admissible velocity fields for forging of trochoidal gear were proposed and the loads were calculated by numerical method. When the simulation was carried out, half pith of gear was divided into 6 deformation regions which have different velicity fields by assumptions and boundary conditions. The neutral surface was introduced into forging of trochoidal gears with flat punch and, for each step, it is assumed as a circle with its radius r$_{n}$. The experimental set-up was installed in 200 ton hydraulic press for forging. The billets, of A1 2218 aluminum alloy, were slightly phosphate-coated. It was shown that thd theoretical solutions, as upper bound, are useful to predict the forging load for forging of trochoidal gears, because thdt give estimates that are substantially higher than experimental loads.s.