• 대한기계학회논문집B
• /
• 제29권12호
• /
• pp.1352-1359
• /
• 2005

Unsteady simulations were performed to investigate the flame structure and the dynamic behavior of a premixed flame exposed to the wall heat loss. A 3-step global reaction mechanism was adopted in this study. Simulations were performed for two tube combustors with inner diameters($d_i$) of 1mm and 4mm. The material of tube combustor was assumed to be a Silicon Nitride($Si_{3}N_4$). The heat loss from the outer tube wall was controlled by adjusting the amount of convective and radiative heat loss. A conical premixed flame could be stabilized inside a tube of $d_i=4mm$. The flame stability inside a tube of $d_i=4mm$ combustor was not much sensitive to the amount of heat loss. In case of a tube of $d_i=1mm$, an oscillating flame was observed in very low heat loss condition and a flame could not be sustained in realistic heat loss condition.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권3호
• /
• pp.1-5
• /
• 2009

It is important to predict AC loss in $Nb_3Sn$ and NbTi cable-in-conduit-conductor (CICC) reliably for the design and operation of large superconducting coils. The hysteresis loss in the superconducting filaments and coupling loss within strands and among strands in a cable or composite are dominant ac losses in superconducting magnets. The coupling loss in a superconductor can be characterized by identifying the coupling constant time $n{\tau}$. To reduce the coupling loss, all the strands (superconductor and Cu) in KSTAR (Korea Superconducting Tokamak Advance Research) are chromium plated with thickness of $l{\pm}0.5{\mu}m$. The ac losses of PF1, PF5 and PF6 coils has been measured by calorimetric method while applying trapezoidal current pulses with various ramp rate from 0.5 kA/s to 2 kA/s. The coupling time constants for $Nb_3Sn$ coils are $25{\sim}55$ ms and the values are not co-related with the coil size, the time constants for NbTi coil is 30 ms.

• 한국정보전자통신기술학회논문지
• /
• 제12권5호
• /
• pp.499-506
• /
• 2019

본 논문은 SiC Hybrid module를 적용한 7kW 인버터의 동작 안정성에 관한 것으로 손실 방정식과 시뮬레이션 결과를 비교하여 시뮬레이션 결과의 유효성을 검증하였으며, 시뮬레이션을 통해 Si module과 SiC Hybrid module의 스위치 손실과 다이오드 손실을 비교하였다. 손실 방정식 계산을 통하여 SiC Hybrid module의 도통 손실은 168W, 스위칭 손실은 9.3W, 다이오드 손실은 10.5nW의 결과를 나타내었으며, 시뮬레이션 결과와 비교하였을 때 유사한 값을 나타내었다. 이를 바탕으로 Si module과 SiC Hybrid module의 시뮬레이션 결과 값 비교 결과, Si module의 총 소자 손실값은 246.2W, SiC Hybrid module의 총 소자 손실 값은 189.9W를 나타내었으며, 손실 차이 값은 56.3W로써 약 0.8W의 효율 차이를 보였다. 이로 인하여 SiC SBD의 Reverse recovery 특성을 검증하였다. 또한 고온 포화상태에서 SiC Hybrid module 및 Si module의 안정성을 확인하기 위하여 온도 포화 테스트를 진행하였으며, Si module의 경우, 출력전력 4kW에서 동작을 멈추었고, SiC Hybrid module은 7kW까지 동작을 확인하였다. 이를 바탕으로, 효율 그래프와 온도 그래프를 제시하였으며, Si module은 4kW까지, SiC Hybrid module은 7kW까지 그래프로 나타내었다.

• 열처리공학회지
• /
• 제11권3호
• /
• pp.159-167
• /
• 1998

In this study, friction-wear test was carried out on the carburized layer depth of a mechanical structure steel SNCM carburized with RX and LPG for 7hrs at $930^{\circ}C$ and also the wear properties of wear loss, wear rate, coefficient of friction, friction force and friction temperature were investigated. The wear properties for carburized layer of SNCM were tested on dry condition at the room temperature by the thrust load of 49~245N range at sliding speed of 0.2m/sec and the sliding speed of 0.2~1.0m/sec range at thrust load of 98N. Wear loss on the depth of carburizing layer was increased with increasing of thrust load and sliding speed, and with decreasing of hardness. The condition of worn surfaces were showed mild wear at less than the thrust load of 98N and sliding speed of 0.6m/sec but were showed severe wear at more than 98N and 0.6m/sec. The friction load and temperature were increased with increasing of thrust load but with increasing sliding speed was appeared minimum at 0.6m/sec. With increasing thrust load the wear rate was increased and the coefficient of friction was decreased, but with increasing sliding speed the wear rate and the coefficient of friction were decreased in 0.2~0.6m/sec and increased in 0.6~1.0m/sec, therefore 0.6m/sec in this testing is a transition velocity.

• Mass Spectrometry Letters
• /
• 제5권4호
• /
• pp.120-123
• /
• 2014

The interference of water vapor on the chemical ionization (CI) of hydroxyl radicals (OH) by sulfur hexafluoride ion ($SF_6{^-}$) was investigated using a flow tube system coupled to a high-pressure CI mass spectrometer. Water vapor, which is required to study heterogeneous reactions of OH under real tropospheric conditions, transforms the reagent ion $SF_6{^-}$ into $SF_4O^-$ and $F^-(HF)_n$, resulting in a substantial loss in CI sensitivity. Therefore, under humid conditions, peaks corresponding to OH are drastically diminished, while those corresponding to OH-water complex ions ($[OH(H_2O)_n]^-$) are enhanced. $[OH(H_2O)_3]^-$ was observed as the major OH species. The obsercation of $[OH(H_2O)_n]^-$ by isolating humid conditions to the CI region and preliminary ab initio calculations suggested that $[OH(H_2O)_n]^-$ ions were produced from reactions between OH ions ($OH^-$) and water molecules. An additional helium buffer flow introduced into the CI region reduced loss of the reagent ion and resulted in a partial recovery of OH peak intensities under humid conditions.

• Journal of Forest and Environmental Science
• /
• 제26권1호
• /
• pp.17-23
• /
• 2010

The present study was conducted to quantify wood and leaf litter decomposition and nutrient release of a dominant tree species, Tectona grandis Linn. F. in a tropical dry deciduous forest of Rajasthan, Western India. The mean relative decomposition rate was maximum in the wet summer and minimum during dry summer. Rainfall and its associated variables exhibited greater control over litter decomposition than temperature. The concentrations of N and P increased in decomposing litter with increasing retrieval days. Mass loss was negatively correlated with N and P concentrations. The monthly weight loss was significantly correlated (P < 0.05) with soil moisture and rainfall in both wood and leaf litter. Tectona grandis was found to be most suitable tree species for plantation programmes in dry tropical regions as it has high litter deposition and decomposition rates and thus it has advantages in degraded soil restoration and sustainable land management.

• 한국토양비료학회지
• /
• 제42권1호
• /
• pp.46-52
• /
• 2009

질소동위원소비(${\delta}^{15}N$)가 낮은 대기질소 강하물의 유입에 의해 산림 생태계 내 다양한 시료(나이테, 엽, 토양)의 ${\delta}^{15}N$ 값이 낮아지는 것으로 보고되고 있다. 하지만, 토양 미생물과 식물이 쉽게 이용할 수 있는 토양 무기태 질소의 ${\delta}^{15}N$에 대한 연구는 진행된 바 없다. 본 연구는 대기질소 강하물이 상대적으로 적은 농촌지역과 많은 공업지역에 위치한 적송 산림지역의 유기토양층과 무기토양층(0~20 cm와 20~40 cm) 중 $NH_4{^+}$과 $NO_3{^-}$의 ${\delta}^{15}N$값을 분석하여 두 지역간의 차이를 조사하였으며, 이들 ${\delta}^{15}N$ 값을 근거로 조사 지역의 질소손실 민감성을 평가하였다. 농촌지역과 공업지역에서 $NH_4{^+}$의 ${\delta}^{15}N$ 값은 각각 +8.9 ~ +24.8‰과 +4.4 ~ +13.8‰로 분포하였다.유기토양층과 무기토양층(0~20 cm)에서 두 지역간 $NH_4{^+}$의 ${\delta}^{15}N$값 차이가 나타났는데, 공업지역에서 각각4.4‰과 +13.8‰이었고, 농촌지역에서는 각각 +8.9‰과 +24.3‰로 공업지역에서 더 낮은 ${\delta}^{15}N$ 값이 나타났다.이는 공업지역에서 ${\delta}^{15}N$값이 낮은 대기 유래 $NH_4{^+}$ 유입량이 더 많았음을 의미한다. 한편, $NO_3{^-}$의 ${\delta}^{15}N$ 값은 지역간 차이가 없었는데, 이는 $NO_3{^-}$가 용탈과 탈질 등에 의해 쉽게 손실되는 과정에서 수반되는 질소동위원소 분할 효과에 의해 강하물에서 유래된 $NO_3{^-}$의 ${\delta}^{15}N$ 기여도가 낮아지기 때문으로 판단된다. 본 연구에서 관측된 무기태 질소의 ${\delta}^{15}N$ 값은 다른 지역에서 조사된 $NH_4{^+}$(-10.9 ~ +15.6‰)과 $NO_3{^-}$(14.8 ~ +5.6‰)의 ${\delta}^{15}N$ 값보다 매우 높은데, 이는 본 연구지역에서 토양 질소 손실 가능성이 높음을 보여준다. 이상의 연구 결과에 의하면 산림토양의 무기태 질소 중 $NO_3{^-}$보다 $NH_4{^+}$이 질소공급원(대기 질소 강하)에 대한 ${\delta}^{15}N$ 정보를 보다 잘 반영하는 것으로 판단된다.

• 한국표면공학회지
• /
• 제40권1호
• /
• pp.39-43
• /
• 2007

The pure CrN powders oxidized to $Cr_2O_3$ noticeably above $850^{\circ}C$ in air. When these powders were sintered into bulk samples at $1500^{\circ}C$ under 40 atm of $N_2$ pressure, the CrN phase partly changed into the $Cr_2N$ phase, owing to the partial loss of nitrogen from CrN. When the bulk sample was heated at $1000-1200^{\circ}C$ for 100 hr under vacuum, the CrN phase also progressively changed into $Cr_2N$. At the same time, a relatively thin $Cr_2O_3$ layer formed on the bulk sample due to the reaction of chromium with residual oxygen in vacuum.

• 한국작물학회지
• /
• 제28권4호
• /
• pp.419-424
• /
• 1983

밀양 2003, 한강찰벼, 태백벼 및 진흥을 공시하여 벼알의 인장강도를 측정하고, binder 수확시 포장손실과 지상 25, 50, 75, 100, 150cm 및 200cm에서 콘크리트 바닥에 이삭을 낙하시켜 낙하높이별 탈립율을 조사하여 충격력과 탈립율과의 관계를 구하고 인장강도의 년차변이를 조사하여 다음과 같은 결과를 얻었다. 1. 평균인장강도는 밀양 2003 0.743 Newton, 한강찰벼 1.078N, 태백벼 1.573N, 진흥 1.775N이었다. 2. 인장강도가 낮을수록 binder 수확시 탈립손실이 많았으며 탈립손실이 없는 인장강도는 약 1.7N이상이었다. 3. 벼의 binder 절단부위의 수분함량은 엽초가 76.7-77.8%, 간이 76-87%이었다. 4. Binder 수확시의 포장손실율은 한 이삭을 약 40cm 높이에서 콘크리트 바닥에 떨어뜨렸을 때의 탈립율과 같았다. 5. 충격력($\chi$, NewtonㆍSec)과 탈립율(Y, %)과의 관계는 밀양 2003에서 Y=-25.73+4958.4$\chi$ ($r^2$=0.987), 한강찰벼에서는 Y=-12.97+2258.3$\chi$ ($r^2$=0.979), 태백벼에서 Y=-5.24+840.4$\chi$ ($r^2$=0.976)이었다. 6. 인장강도는 동일품종에서도 년차간에 유의적변이를 보였는데 그 변이폭은 탈립성이 큰 품종에서 작았다.

• 한국분말재료학회지
• /
• 제25권6호
• /
• pp.494-500
• /
• 2018

In this study, the effect of the content of $MgO-CaO-Al_2O_3-SiO_2$ (MCAS) glass additives on the properties of AlN ceramics is investigated. Dilatometric analysis and isothermal sintering for AlN compacts with MCAS contents varying between 5 and 20 wt% are carried out at temperatures ranging up to $1600^{\circ}C$. The results showed that the shrinkage of the AlN specimens increases with increasing MCAS content, and that full densification can be obtained irrespective of the MCAS content. Moreover, properties of the AlN-MCAS specimens such as microhardness, thermal conductivity, dielectric constant, and dielectric loss are analyzed. Microhardness and thermal conductivity decrease with increasing MCAS content. An acceptable candidate for AlN application is obtained: an AlN-MCAS composite with a thermal conductivity over $70W/m{\cdot}K$ and a dielectric loss tangent (tan ${\delta}$) below $0.6{\times}10^{-3}$, with up to 10 wt% MCAS content.