• 제목/요약/키워드: N generation

검색결과 1,914건 처리시간 0.028초

$CO_2$ 용접의 천이이행 조건에서 스패터 발생과 파형인자와의 관계 (Relationship between Spatter Generation and Waveform Factors in Transitional Condition of $CO_2$ Welding)

  • 강봉용;이창한;김희진;장희석
    • Journal of Welding and Joining
    • /
    • 제16권4호
    • /
    • pp.39-46
    • /
    • 1998
  • $CO_2$ gas shielded arc welding has been characterized with its harsh arc compared to Ar-based shielding gases and with its high level of spattere specially in welding current range of 250~300 amperes. In this range of welding current, the metal transfer mode showed to be changed from short circuit to globular with the increase of welding voltage resulting in so-called the transitional mode in which both modes of transfer appeared together. To characterize the transitional mode, the short circuit events were divided into two groups, i.e. normal short circuit (N.S.C) which has short circuit time $(t_s)$ over 2msec and instantaneous short circuit (I.S.C) of $t_s$$\leq$2msec. The experimental results showed that the number of N.S.C decreased almost linearly with the increase of welding voltage and appeared to be not related with spatter generation rate. However I.S.C became to be pronounced in the transitional condition and its number reached the maximum value at around 29.0 volts. Considering the relation with the spatter generation rate, it was found that the number of I.S.C had a very strong correlation with the spatter generation rate of the transitional condition. It was further demonstrated that spatter generation rate decreased quite linearly with the decrease of I.S.C frequency. It implies that I.S.C is the most important waveform factor controlling the spatter generation of the transitional mode, i.e. in the middle range of welding current. Based on these results, It was discussed that in the transitional mode the basic concept of waveform control for suppressing spatter generation would be different from the one applied for typical short circuit transfer mode of low welding current.

  • PDF

Computing Fluid Flow without Grid Generation

  • Hui W.H.;Wu Z.N.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
    • /
    • pp.29-32
    • /
    • 2003
  • It is shown that using the unified coordiantes of Hui et al.[1 - 4], one can now compute fluid flow without prior grid generation. This represents a great saving of computing time.

  • PDF

Thimerosal generates superoxide anion by activating NADPH oxidase: a mechanism of thimerosal-induced calcium release

  • Kim, Eui-Kyung;Ryu, Sung-Ho;Suh, Pann-Ghill
    • 한국환경성돌연변이발암원학회지
    • /
    • 제22권4호
    • /
    • pp.229-235
    • /
    • 2002
  • Thimerosal, a widely used preservative, has been well known to induce intracellular calcium mobilization in various cell types. However, the mechanism of its calcium mobilization is not clearly understood yet. For studying the mechanism of thimerosal-mediated calcium release, we have used HL60 cells in calcium-free Lockes solution that has no extracellular calcium. Thimerosal significantly reduced the lag period of initial calcium release whereas it enhanced the rate and magnitude of the calcium release in a dose-dependent manner. At the same time, we found that thimerosal generated superoxide anion by activating NADPH oxidase in dose- and time-dependent manner. Interestingly, the kinetics and the dosedependency of superoxide anion generation were very similar to those of intracellular calcium mobilization. In inhibitors study, the thimerosal-induced superoxide anion generation was significantly suppressed by DMSO as well as superoxide dismutase but not by genistein or EGTA. Surprisingly, the pretreatment with N-Acetyl-$_{L}$-Cysteine blocked almost completely the thimerosal-induced calcium increase, indicating that ROS playa key role in the calcium mobilization. The present results suggest that thimerosal-induced calcium mobilization is possibly mediated by the activation of NADPH oxidase and subsequent ROS generation.n.

  • PDF

모형매립조를 이용한 산업폐기물 매립지의 안정화 조사 기초 연구 (Stabilization of Industrial Wastes Landfill using Lab-lysimeter)

  • 박동일;최석규;홍종순;장인용
    • 환경위생공학
    • /
    • 제13권3호
    • /
    • pp.9-18
    • /
    • 1998
  • An experimental research was conducted to establish primary data for the stabilization assessment of industrial wastes landfill with analysis of waste components and investigation of leachate and gas generation, using three sets of lysimeter as experimental apparatus. Comparing results of lysimeter from data of landfill, it is suggested that lysimeter of this study can be used to accomplish the stabilization assessment of the real landfill site. Moisture content was lower as landfill period was older and combustible component was the highest in lysimeter C. The C/N ratio of waste was 7.4~14.4 and, with the elemental analysis, the theoretical gas generation rate based on the modified Buswell equation was 0.47~0.49 $m^3/kg-dry$ waste in lysimeter C. Considering the C/N ratio of leachate, it is concluded that the addition of carbon source is needed to biodegrade leachate hereafter. Gas generation rate($m^3/kg-dry$ waste) from lysimeter A, B and C was 0.0009, 0.014 and 0.0067, respectively, and different from each other according to the landfill period of wastes. The results in this study show that the biodegradation of microorganism for stabilization of landfill was inhibited and more activated in acidogenic step than in methanogenic of anaerobic degradation.

  • PDF

n형 Bi-Te 나노와이어와 p형 Sb-Te 나노와이어로 구성된 미세열전소자의 형성공정 및 열전발전특성 (Fabrication Process and Power Generation Characteristics of the Micro Thermoelectric Devices Composed of n-type Bi-Te and p-type Sb-Te Nanowires)

  • 김민영;박경원;오태성
    • 대한금속재료학회지
    • /
    • 제47권4호
    • /
    • pp.248-255
    • /
    • 2009
  • A micro thermoelectric device was processed by electroplating the n-type Bi-Te nanowires and ptype Sb-Te nanowires into an alumina template with 200 nm pores. Power generation characteristics of the micro devices composed of the Bi-Te nanowires, the Sb-Te nanowires, and both the Bi-Te and the Sb-Te nanowires were analyzed with applying a temperature difference of $40^{\circ}C$ across the devices along the thickness direction. The n-type Bi-Te and the p-type Sb-Te nanowire devices exhibited thermoelectric power outputs of $3.8{\times}10^{-10}W$ and $4.8{\times}10^{-10}W$, respectively. The output power of the device composed of both the Bi-Te and the Sb-Te nanowires decreased to $1.4{\times}10^{-10}W$ due to a large electrical resistance of the Cu electrode connecting the Bi-Te nanowire array with the Sb-Te nanowire array.

Agent-Based Modeling for Studying the Impact of Capacity Mechanisms on Generation Expansion in Liberalized Electricity Market

  • Dahlan, N.Y.
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권4호
    • /
    • pp.1460-1470
    • /
    • 2015
  • This paper presents an approach to solve the long-term generation expansion planning problem of the restructured electricity industry using an agent-based environment. The proposed model simulates the generation investment decisions taken by a particular agent (i.e. a generating company) in a market environment taking into account its competitors’ strategic investment. The investment decision of a particular company is modeled taking into account that such company has imperfect foresight on the future system development hence electricity prices. The delay in the construction of new plants is also explicitly modeled, in order to compute accurately the yearly revenues of each agent. On top of a conventional energy market, several capacity incentive mechanisms including capacity payment and capacity market are simulated, so as to assess their impact on the investment promotion for generation expansion. Results provide insight on the investment cycles as well as dynamic system behavior of long-term generation expansion planning in a competitive electricity industry.

W세대 메이크업 특성에 관한 연구 (A Study of the Characteristics of Make-up in the W-Generation)

  • 권현아
    • 복식
    • /
    • 제56권6호
    • /
    • pp.132-144
    • /
    • 2006
  • 21C, the age of culture, has the effects on the whole aspects in society with its cultural features, and the social changes become the foundation to create the new culture. The W generation, which accounts for Woman, World, Well-being, and Web, etc, leads the trend as 'a new group of powerful consumers' of establishing a new pattern. The W generation prefers psychidelic make-up using pearl through the cyber space, a space for communication like the N generation. In addition, through the Internet, leading the society of fusion or hybrid, with gender and age broken-up, the feminine as well as kidult-like make-up has emerged. On the other hand, with the influence of well-being on the whole society, well-looking appears outside, and lohas inside. The W generation prefers glossy make-up in order to make the skin healthy and polished, and eco-friendly products with lohas.

비압축성유동을 위한 수치적응 격자생성에 관한 연구 (A Study on Numerical Adaptive Grid Generation for Incompressible Flow)

  • 이주희;이상환;윤준용
    • 대한기계학회논문집
    • /
    • 제19권9호
    • /
    • pp.2237-2248
    • /
    • 1995
  • In incompressible flow which has multi-length scale, it has a very important effect which dependent variables are used for adaptive grid generation. Among many length scales in incompressible flow, the dependent variables used for the adaptive grid generation should be able to represent the feature of the concerned system. In this paper, by using vorticity and stream function, in addition to velocity components, the smoother and more stable grid generation is possible and these four flow properties represent each scale. The adaptive grid generation for a lid-driven cavity flow with $N_{re}$ =3200 using four flow properties such as velocity components, vorticity, stream function is performed, and the usefulness of using vorticity and stream function as the indicator for adaptive grid generation is shown.

2차원/3차원 자유시점 비디오 재생을 위한 가상시점 합성시스템 (Virtual View Rendering for 2D/3D Freeview Video Generation)

  • 민동보;손광훈
    • 대한전자공학회논문지SP
    • /
    • 제45권4호
    • /
    • pp.22-31
    • /
    • 2008
  • 3DTV를 위한 핵심 기술 중의 하나인 다시점 영상에서 변이를 추정하고 가상시점을 합성하는 새로운 방식을 제안한다. 다시점 영상에서 변이를 효율적이고 정확하게 추정하기 위해 준 N-시점 & N-깊이 구조를 제안한다. 이 구조는 이웃한 영상의 정보를 이용하여 변이 추정 시 발생하는 계산상의 중복을 줄인다. 제안 방식은 사용자에게 2D와 3D 자유시점을 제공하며, 사용자는 자유시점 비디오의 모드를 선택할 수 있다. 실험 결과는 제안 방식이 정확한 변이 지도를 제공하며, 합성된 영상이 사용자에게 자연스러운 자유시점 비디오를 제공한다는 것을 보여준다.

등고선 데이터를 이용한 산악지형 유동해석 격자생성 프로그램 개발 및 그 응용 (The development of a mesh generation program using contour line data)

  • 진상문;원찬식;허남건
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2004년도 춘계 학술대회논문집
    • /
    • pp.202-207
    • /
    • 2004
  • In the present study a mesh generation program has been developed by using DXF file. The program consists of DXF file reading and mapping algorithm, which projects the 2-D mesh point onto the triangular surface constructed by nearest three points. The present program has been tested for mesh generations for the road tunnel ventilation analysis and analysis of lava movement in mountain area.

  • PDF