• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.91-93
• /
• 2009

A large steel ingot needs to be larger and larger in size and an ultra high clean, no defect in quality with a low hot top ratio for the resent heavy industry. The demands are very difficult to achieve simultaneously because of their contradictive effect to each other in results. In this study, 30ton steel ingot was cast in a foundry with an optimized design parameter of cast mold and cast process conditions for the low hot top ratio, 12%. The cast ingot was analyzed in macro defect, segregations, and cleanness. No macro defect was founded in central surface of the ingot. The degree of segregation and cleanness are in the controlled range with a sound quality.

• Korean Chemical Engineering Research
• /
• 제44권2호
• /
• pp.200-206
• /
• 2006

세라믹 담체가 충진된(공극률 32％) 생물여과 반응기(BAF)를 이용하여 암모니아성 질소폐수를 처리할 때, 수리학적 체류시간(HRT) 및 폭기량의 변화가 아질산 축적에 미치는 영향에 대해서 고찰하였다. 암모니아성 합성 폐수 및 석유화학 실폐수를 $1.6kgNH_4^+-N/m^3{\cdot}d$ 내외의 질소 부하로 BAF에 공급하였을 때, 암모니아성 질소의 제거율은 폭기량 증가에 비례하였으나 아질산 축적률은 폭기량 외에도 HRT의 영향을 받았다. 0.23시간의 HRT에서(공탑 체류시간 기준 0.7시간)는 0.23, 0.45, 0.56 cm/s로 공기 선속도를 증가시키면, 암모니아성 질소 제거율은 각각 73, 90, 92％로 증가하였으나 아질산 축적비($NO_2-N/NO_x-N$)는 0.92, 0.82, 0.48로 점차 감소하였다. 반면에 HRT 0.9시간, 공기 선속도 0.34~0.45 cm/s 범위에서는 암모니아성 질소 제거율 89％, 아질산 축적비 0.13 내외로 아질산 축적률이 급격하게 감소하였다. 공기 선속도 0.34 cm/s, HRT 1.4시간에서는 암모니아성 질소 제거율의 감소로 free ammonia(FA, $NH_3-N$) 농도가 상승하였고, 이후 약 50일에 걸쳐 아질산 축적비는 0.95 이상까지 점차 증가하였다. 본 연구에서는 HRT 0.23시간에서의 FA 농도 및 폭기 조건이 HRT 0.9시간 조건에 비해 아질산 축적에 더 불리했음에도 HRT 0.23시간에서의 아질산 축적률이 더 높게 나타났다. 따라서 FA 농도, 폭기 조건 외에도 HRT, 질소 부하 조건에 따라 BAF에서 아질산 축적량이 영향을 받았다. 반면에 FA 농도가 매우 높게(FA 5~15 mgN/L) 유지되는 조건에서는 운전 조건에 상관없이 아질산 축적이 안정하게 일어났으며 이 경우는 암모니아성 질소 제거율이 감소하였다.

• 동아시아식생활학회지
• /
• 제1권1호
• /
• pp.99-111
• /
• 1991

In each nuruk using today, effect of pH on glucoamylase activity and viable cell count of yeast and bacteria was measured. Common components during fermentation, alcohol, acetaldehyde and acetone, amino acid composition, and total sugars and mineral content were determined in yakju(korean wine) brewed from different ingredients and by different methods. Results are summarized as follows ; 1. The lower the pH, the lower the glucoamylase activity in JK, BK, JK-S BK-S and JN. But the higher the glucoamylase activity ratio in Koji and KN. 2. Yeast and bacteria cell count could not determined in nuruk inoculated of seed. In JK, BK and JN, yeast cell count was 50${\times}$104∼80${\times}$104, bacteria cell count was 5${\times}$106∼24${\times}$106. 3. In yakju during fermentation, pH was higher in RU, total acidity content was higher in ST-N, ST-K, RU and ST-RUPO and alcohol content was lower in RUPO and ST-RUPO. 4. Ethanol and acetaldehyde content were highest in dukyunju. Trace amount of acetone was determined only in ST-K, RUPO and ST-RUPO . n-Propyl alcohol content was higher in ST-K, ST-RUPO and ST-N, iso-butyl alcohol content was higher in L-RUPO, Dukyunju and Songyupju and iso-amyl alcohol content was higher in Songyupju, RU, L-RUPO and Dukyunju. 5. In amino acids composition of each yakju, Pro, Ala and Val content was higher than other amino acids. Total amino acids content was the highest in Dukyunju and second highest in ST-N, NH3 was higher in ST-N, Dukyunju, RUPO than other samples. 6. Total sugars content was the highest in ST-N and second highest in RU. 7. P, K and Mg content were higher in Dukyunju and ST-N than in other samples. In Dukyunju, Ca and P ratio was 0.075 because of low Ca content and high P content.

• 한국물환경학회지
• /
• 제31권3호
• /
• pp.304-312
• /
• 2015

In this study, we tried to determine the vertical variation of sediment structure and geochemical characteristics, core sediment was collected in the Nakdong River midstream on August, 2014. Core sediment mainly composed of sand (51.48%) and silt (46.21%) and coarsing upward changed from sM to mS facies. IL and TOC were decreased from lower to upper layer. C/N ratio was lower than 10 so the organic matters were originated from underwater creatures and C/S ratio was decreased from lower to upper layer. Heavy metal (Al, Fe, Zn, Cr, Pb, Ni, Cu, Cd) content were decreased from lower to upper layer and seriously polluted condition is not. These results are thought to be due to the effect of natural and anthropogenic in the fluctuation of flow.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제17권2호
• /
• pp.205-209
• /
• 2008

Impact of food plant on reproductive and commercial parameters in Antheraea mylitta, a polyphagous insect of economic importance was studied upon feeding the insect larvae on the same host plants for six continuous generations. A. mylitta larvae were fed upon Terminalia tomentosa, Terminalia arjuna and Zizyphus jujuba and restricted them to the same host plant for six generations to document the quantitative improvement in reproductive and commercial parameters. The parameters showed significant improvement in all the host plants studied over their respective controls. Fecundity among the reproductive parameters was highly improved than others (85.9% in T. tomentosa; 58% in T. arjuna and 49.7% in Z. jujuba). Likewise in commercial parameters, the shell weight in male showed the highest improvement (by 52.9%, 45.8% and 42.1% in T. tomentosa; T. arjuna and Z. jujuba respectively). On the other hand, the shell ratio percentage in female recorded the lowest improvement. The values for all characters were recorded a decline in T. arjuna and Z. jujuba fed ones over T. tomentosa, except that of shell ratio percentage in female has registered an increase in Z jujuba fed. The study thus revealed the comparative superiority of T. tomentosa over T. arjuna and Z. jujuba.

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.980-987
• /
• 2005

It is very difficult to reduce ambient noise level in the downtown. The best method is to improve the sound amenity of the districts, considering concept of soundscape. This study aims to survey the effect of introducing sound and masking to reduce the background noise level. We carried out the evaluating test for 18 introducing sounds varied S/N ratio(-5, 0, +5) in the city riverside. In these test, subjects evaluated the sound environment with five bipolar adjective scales. It was evaluated that introducing sounds improved the sound environment, and that S/N +5 dB was very appropriate to mask the background noise. But the hearing level was suggested to be S/N 0 dB or less.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.607-610
• /
• 2005

It is very difficult to reduce traffic noise level in the downtown. The best method is to improve the sound amenity of the districts, considering concept of soundscape. ?his study aims to survey the effect of introducing sound and masking to reduce the background noise level. We carried out the evaluating test for 18 introducing sounds varied S/N ratio(-5, 0, +5) in the city riverside. In these test, subjects evaluated the sound environment with five bipolar adjective scales. It was evaluated that introducing sounds improved the sound environment and that S/N + 5dB was very appropriate to mask the background noise. But the hearing level was suggested to be S/N 0 dB or less.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제2권4호
• /
• pp.259-273
• /
• 2021

We conducted a study to investigate the characteristics of the carbon cycle of two streams (located in Shig a Prefecture, Japan), having similar size, namely, the Adokawa stream (length: 52 km, area: 305 km², watershed population: 8,000) and the Yasukawa stream (length: 62 km, area: 380 km², watershed population: 120,000), but with different degree of human activity. Samples were collected from these two streams at 14 (Adokawa stream) and 23 (Yasukawa stream) stations in the flowing direction. The dissolved inorganic carbon (DIC) concentration and the stable carbon isotope ratio of DIC (δ¹³C-DIC) were measured in addition to the watershed features and the chemical variables of the stream water. The δ¹³C-DIC (-9.50 ± 2.54‰), DIC concentration (249 ± 76 µM), and electric conductivity (52 ± 13 µS/cm) in Adokawa stream showed small variations from upstream to downstream. However, the δ¹³C-DIC (-8.68 ± 2.3‰) upstream of Yasukawa stream was similar to that of Adokawa stream and decreased downstream (-12.13 ± 0.43‰). DIC concentration (upstream: 272 ± 89 µM, downstream: 690 ± 37 µM) and electric conductivity (upstream: 69 ± 17 µS/cm, downstream: 193 ± 37 µS/cm) were higher downstream than upstream of Yasukawa stream. The DIC concentration of Yasukawa stream was significantly correlated with watershed environmental variables, such as, watershed population density (r = 0.8581, p<0.0001, n = 23), and forest area percentage of the watershed (r = -0.9188, p<0.0001, n = 23). δ¹³C-DIC showed significant negative correlation with the DIC concentration (r = -0.7734, p<0.0001, n = 23), electric conductivity (r = -0.5396, p = 0.0079, n = 23), and watershed population density (r = -0.6836, p = 0.0003, n = 23). Our approach using a stable carbon isotope ratio suggests that DIC concentration and δ¹³C-DIC could be used as indicators for monitoring the health of stream ecosystems with different watershed characteristics.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.797-806
• /
• 2009

The mechanical and thermal behaviors of polyamide-6/clay nanocomposites were studied using the continuum-based, micromechanical models such as Mori-Tanaka, Halpin-Tsai and shear lag. Mechanic-based model prediction provides a better understanding regarding the dependence of the nanocomposites' reinforcement efficiency on conventional filler structural parameters such as filler aspect ratio ($\alpha$), filler orientation (S), filler weight fraction (${\Psi}_f$), and filler/matrix stiffness ratio ($E_f/E_m$). For an intercalated and exfoliated nanocomposite, an effective, filler-based, micromechanical model that includes effective filler structural parameters, the number of platelets per stack (n) and the silicate inter-layer spacing ($d_{001}$), is proposed to describe the mesoscopic intercalated filler and the nanoscopic exfoliated filler. The proposed model nicely captures the experimental modulus behaviors for both intercalated and exfoliated nanocomposites. In addition, the model prediction of the heat distortion temperature is examined for nanocomposites with different filler aspect ratio. The predicted heat distortion temperature appears to be reasonable compared to the heat distortion temperature obtained by experimental tests. Based on both the experimental results and model prediction, the reinforcement efficiency and heat resistance of the polyamide-6/clay nanocomposites definitely depend on both conventional (${\alpha},\;S,\;{\Psi}_f,\;E_f/E_m$) and effective (n, $d_{001}$) filler structural parameters.

• Journal of Welding and Joining
• /
• 제18권1호
• /
• pp.83-90
• /
• 2000

It was attempted to improve seam-tracking performance by applying a new arc-sensing algorithm for FCAW(flux-cored arc welding) process in fillet joints. For this study the authors have introduced three different weight factors: $\circled1$ arc currents at the weaving end are more weighted, $\circled2$ arc currents are evenly weighted along the weaving, and $\circled3$ arc currents at the weaving center are more weighted. To evaluate the 3 factors the values of signal-to-noise(S/N) ratio has been measured. The values were obtained for various welding conditions with different gaps in horizontal and vertical fillet joints. The test results showed that the S/N ratio of the 1st case was highest which resulted in the best of seam tracking performance. In addition, the comparison between the seam tracking performance in horizontal fillet joints and that in vertical ones has been done, and the result showed that tracking performance in vertical joints was relatively better than that in horizontal joints.